Black Phosphorus-Film with Drop-Casting Method for High-Energy Pulse Generation From Q-Switched Er-Doped Fiber Laser
), Abstract
We have reported high-energy pulse generation from a Q-switched Er-doped fiber laser based on black phosphorus (BP) with a drop-casting method. Poly dimethyl diallyl ammonium (PDDA) is employed to protect BP. A passive Q-switching operation is achieved by using the BP/polyvinyl alcohol (PVA) film as the saturable absorbers (SAs). When the pump power increases from 130.4mW to 378mW, the repetition rate increases from 13.33kHz to 26.6kHz, and the pulse duration decreases from 10.67μs to 7.11μs. The maximum pulse energy is 468.03nJ, to the best of our knowledge, which is the highest pulse energy produced from Q-switched fiber laser based on BP-SA at 1.5 μm. The obtained high-energy pulse demonstrates that BP/PVA film fabricated by such a drop-casting method can provide an ideal SA for high pulse energy generation from fiber lasers, and it has a potential application of remote sensing.
References
P. Pérez-Millán, J. L. Cruz, and M. V. Andrés, “Active Q-switched distributed feedback erbium-doped fiber lasers,” Applied Physics Letters, 2005, 87(1): 37.
Z. Q. Luo, M. Zhou, J. Weng, G. M. Huang, H. Y. Xu, C. C. Ye, et al., “Graphene-based passively Q-switched dual-wavelength erbium-doped fiber laser,” Optics Letters, 2010, 35(21): 3709‒3711.
F. N. Xia, H. Wang, D. Xiao, M. Dubey, and A. Ramasubramaniam, “Two-dimensional material nanophotonics,” Nature Photonics, 2014, 8(12): 899‒907.
Z. P. Sun, D. Popa, T. Hasan, F. Torrisi, E. J. R. Kelleher, J. C. Travers, et al., “A stable, wideband tunable, near transform-limited, graphene-modelocked, ultrafast laser,” Nano Research, 2010, 3(9): 653‒660.
P. R. Nair, P. Blake, A. N. Grigorenko, K. S. Novoselo, T. J. Booth, T. Stauber, et al., “Fine structure constant defines visual transparency of graphene,” Science, 2008, 320(5881): 1308‒1308.
Q. H. Wang, K. Kalantar-Zadeh, A. Kis, J. N. Coleman, M. S. Strano, “Electronics and optoelectronics of two-dimensional transition metal dichalcogenides,” Nature Nanotechnology, 2012, 7(11): 699‒712.
S. X. Wang, H. H. Yu, H. J. Zhang, A. Z. Wang, M. W. Zhao, Y. X. Chen, et al., “Broadband few-layer MoS2 saturable absorbers,” Advanced Materials, 2014, 26(21): 3538‒3544.
C. J. Zhao, H. Zhang, X. Qi, Y. Chen, Z. T. Wang, S. C. Wen, et al., “Ultra-short pulse generation by a topological insulator based saturable absorber,” Applied Physics Letters, 2012, 101(21): 118.
J. F. Li, H. Y. Luo, B. Zhai, R. G. Lu, Z. N. Guo, H. Zhang, et al., “Black phosphorus: a two-dimension saturable absorption material for mid-infrared Q-switched and modelocked fiber lasers,” Scientific Reports, 2016, 6: 30361.
L. K. Li, Y. J. Yu, G. J. Ye, Q. Q. Ge, X. D. Ou, H. Wu, et al., “Black phosphorus field-effect transistors,” Nature Nanotechnology, 2014, 9(5): 372‒377.
J. Sotor, G. Sobon, W. Macherzynski, P. Paletko, K. M. Abramski, “Black phosphorus saturable absorber for ultrashort pulse generation,” Applied Physics Letters, 2015, 107(5): 440‒449.
K. P. Wang, B. M. Szydlowska, G. Z. Wang, X. Y. Zhang, J. J. Wang, J. J. Magan, et al., “Ultrafast nonlinear excitation dynamics of black phosphorus nanosheets from visible to mid-infrared,” ACS Nano, 2016, 10(7): 6923‒6932.
R. J. Suess, M. M. Jadidi, T. E. Murphy, and M. Mittendorff, “Carrier dynamics and transient photobleaching in thin layers of black phosphorus,” Applied Physics Letters, 2015, 107(8): 081103.
S. F. Zhang, Y. X. Li, X. Y. Zhang, N. N. Dong, K. P. Wang, D. Hanlon, et al., “Slow and fast absorption saturation of black phosphorus: experiment and modelling,” Nanoscale, 2016, 8(39): 17374‒17382.
S. F. Zhang, X. Y. Zhang, H. Wang, B. H. Chen, K. Wu, K. P. Wang, et al., “Size-dependent saturable absorption and mode-locking of dispersed black phosphorus nanosheets,” Optical Materials Express, 2016, 6(10): 3159‒3168.
H. Ahmad, M. A. M. Salim, K. Thambiratham, S. F. Norizan, and S. W. Harun, “A black phosphorus-based tunable Q-switched ytterbium fiber laser,” Laser Physics Letters, 2016, 13(9): 7.
X. C. Su, Y. R. Wang, B. T. Zhang, R. W. Zhao, K. J. Yang, J. L. He, et al., “Femtosecond solid-state laser based on a few-layered black phosphorus saturable absorber,” Optics Letters, 2016, 41(9): 1945‒1948.
Y. Chen, G. B. Jiang, S. Q. Chen, Z. N. Guo, X. F. Yu, C. J. Zhao, et al., “Mechanically exfoliated black phosphorus as a new saturable absorber for both Q-switching and mode-locking laser operation,” Optics Express, 2015, 23(10): 12823‒12833.
H. Yu, X. Zheng, K. Yin, X. G. Cheng, T. Jiang, “Nanosecond passively Q-switched thulium/holmium-doped fiber laser based on black phosphorus nanoplatelets,” Optical Materials Express, 2016, 6(2): 603‒609.
J. Sotor, G. Sobon, M. Kowalczyk, W. Macherzynski, P. Paletko, and K. M. Abramski, “Ultrafast thulium-doped fiber laser mode locked with black phosphorus,” Optics Letters, 2015, 40(16): 3885‒3888.
M. Q. Fan, T. Li, S. Z. Zhao, G. Q. Li, X. Gao, K. J. Yang, et al., “Multilayer black phosphorus as saturable absorber for an Er:Lu2O3 laser at similar to 3 μm,” Photonics Research, 2016, 4(5): 181‒186.
S. C. Liu, Y. N. Zhang, L. Li, Y. G. Wang, R. D. Lv, X. Wang, et al., “Er-doped Q-switched fiber laser with a black phosphorus/polymethyl methacrylate saturable absorber,” Applied Optics, 2018, 57(6): 1292‒1295.
F. Bonaccorso and Z. P. Sun, “Solution processing of graphene, topological insulators and other 2d crystals for ultrafast photonics,” Optical Materials Express, 2013, 4(1): 63‒78.
J. Y. Liu, F. Y. Zhao, H. S. Wang, W. Zhang, X. H. Hu, X. H. Li, et al., “Generation of dark solitons in erbium-doped fiber laser based on black phosphorus nanoparticles,” Optical Materials, 2019, 89: 100‒105.
Z. N. Guo, H. Zhang, S. B. Lu, Z. T. Wang, S. Y. Tang, J. D. Shao, et al., “From black phosphorus to phosphorene: basic solvent exfoliation, evolution of Raman scattering, and applications to ultrafast photonics,” Advanced Functional Materials, 2015, 25(45): 6996‒7002.
Q. L. Feng, H. Y. Liu, M. J. Zhu, J. Shang, D. Liu, X. Q. Cui, et al., “Electrostatic functionalization and passivation of water-exfoliated few-layer black phosphorus by poly dimethyldiallyl ammonium chloride and its ultrafast laser Application,” ACS Applied Materials & Interfaces, 2018, 10: 9679‒9687.
A. Castellanos-Gomez, L. Vicarelli, E. Prada, J. O. Island, K. L. Narasimha-Acharya, S. I. Blanter, D. J. Groenendiijk, et al., “Isolation and characterization of few-layer black phosphorus,” 2d Materials, 2014, 1(2): 025001.
Y. Zhang, X. H. Li, A. Qyyum, T. C. Feng, P. L. Guo, J. Jiang, et al., “PbS nanoparticles for ultrashort pulse generation in optical communication region,” Particle & Particle Systems Characterization, 2018, 35: 1800341.
X. H. Li, X. C. Yu, Z. P. Sun, Z. Y. Yan, B. Sun, Y. B. Cheng, et al., “High-power graphene mode-locked Tm/Ho co-doped fiber laser with evanescent field interaction,” Scientific Reports, 2015, 5: 16624.
H. R. Mu, S. H. Lin, Z. X. Wang, S. Xiao, P. F. Li, Y. Chen, et al., “Black phosphorus-polymer composites for pulsed lasers,” Advanced Optical Materials, 2015, 3(10): 1447‒1453.
D. Li, A. Esau Del Rio Castillo, H. Jussila, G. J. Ye, Z. Y. Ren, J. T. Bai, et al., “Black phosphorus polycarbonate polymer composite for pulsed fibre lasers,” Applied Materials Today, 2016, 4: 17‒23.
D. Li, H. R. Jussila, L. Karvonen, G. J. Ye, H. Lipsanen, X. H. Chen, et al., “Polarization and thickness dependent absorption properties of black phosphorus: new saturable absorber for ultrafast Pulse generation,” Scientific Reports, 2015, 5: 15899.
京公网安备11010802044758号