AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (4 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Review | Open Access

Recent development of A2B2O7 system transparent ceramics

Zhengjuan WANGa,b( )Guohong ZHOUa,b( )Danyu JIANGaShiwei WANGa,b( )
State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
Key Laboratory of Transparent Opto-functional Inorganic Materials, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
Show Author Information

Abstract

A2B2O7 system compounds, which usually present three phase structures mainly based on the ionic radius ratios of rA and rB (rA/rB), have been studied for potential applications in many fields, such as thermal barrier coatings, luminescence powders, fast-ion conductors, photocatalysts, and matrices for immobilization of highly active radionuclides. Since 2005, La2Hf2O7 was fabricated into transparent ceramics and much more attentions were paid on A2B2O7 transparent ceramics for new applications. In this review, the development of A2B2O7 system transparent ceramics was described. The structure characteristics, powder synthesis method, and sintering techniques of the final A2B2O7 transparent ceramics were summarized. After that, the mostly reported A2Hf2O7, A2Zr2O7, and A2Ti2O7 system transparent ceramics were systematically introduced. The potential application fields and future development trends were also discussed, focusing on scintillators, optical elements, and other luminescent materials.

References

[1]
RL Coble. Transparent alumina and method of preparation. U.S. Patent 3,026,210. 1962.
[2]
Y Fang, D Agrawal, G Skandan, et al. Fabrication of translucent MgO ceramics using nanopowders. Mater Lett 2004, 58: 551554.
[3]
H Eilers. Fabrication, optical transmittance, and hardness of IR-transparent ceramics made from nanophase yttria. J Eur Ceram Soc 2007, 27: 47114717.
[4]
TK Gupta, BR Rossing, WD Straub. Fabrication of transparent polycrystalline CaO. J Am Ceram Soc 1973, 56: 339339.
[5]
VS Kortov, II Milman, AI Slesarev, et al. New BeO ceramics for TL ESR dosimetry. Radiat Prot Dosim 1993, 47: 267270.
[6]
U Peuchert, Y Okano, Y Menke, et al. Transparent cubic-ZrO2 ceramics for application as optical lenses. J Eur Ceram Soc 2009, 29: 283291.
[7]
K Tsukuma. Transparent MgAl2O4 spinel ceramics produced by HIP post-sintering. J Ceram Soc Jpn 2006, 114: 802806.
[8]
S Dutta, G Gazza. Hot pressing ceramic oxides to transparency by heating in isothermal increments. U.S. Patent 3,767,745. 1973.
[9]
HD Zeman, FA Dibianca, G Lovhoiden. High-resolution X-ray imaging with a Gd2O3(Eu) transparent ceramic scintillator. In: Proc. SPIE 2432, Medical Imaging 1995: Physics of Medical Imaging, 1995: 454461.
[10]
X Zou, H Yi, G Zhou, et al. Highly transmitting ZrO2-doped Lu2O3 ceramics from combustion synthesized powders. J Am Ceram Soc 2011, 94: 27722774.
[11]
ZM Seeley, JD Kuntz, NJ Cherepy, et al. Transparent Lu2O3:Eu ceramics by sinter and HIP optimization. Opt Mater 2011, 33: 17211726.
[12]
X Qin, G Zhou, H Yang, et al. Fabrication and plasma resistance properties of transparent YAG ceramics. Ceram Int 2012, 38: 25292535.
[13]
X Qin, H Yang, G Zhou, et al. Fabrication and properties of highly transparent Er:YAG ceramics. Opt Mater 2012, 34: 973976.
[14]
GS Snow. Fabrication of transparent electrooptic PLZT ceramics by atmosphere sintering. J Am Ceram Soc 1973, 56: 9196.
[15]
SJ Duclos, CD Greskovich, RJ Lyons, et al. Development of the HiLightTM scintillator for computed tomography medical imaging. Nucl Instrum Meth A 2003, 505: 6871.
[16]
RJ Riedner, EO Gürmen, CD Greskovich, et al. Solid state scintillator and treatment therefor. U.S. Patent 4,783,596. 1988.
[17]
H Yamada, A Suzuki, Y Uchida, et al. A scintillator Gd2O2S:Pr, Ce, F for X-ray computed tomography. J Electrochem Soc 1989, 136: 27132716.
[18]
CWE Van Eijk. Inorganic scintillators in medical imaging. Phys Med Biol 2002, 47: R85.
[19]
VG Tsoukala, CD Greskovich. Hole-trap-compensated scintillator material. U.S. Patent 5,318,722. 1994.
[20]
A Lyberis, G Patriarche, P Gredin, et al. Origin of light scattering in ytterbium doped calcium fluoride transparent ceramic for high power lasers. J Eur Ceram Soc 2011, 31: 16191630.
[21]
W-Y Lin, M-H Hon, S-J Yang. Effect of grain growth on hot-pressed optical magnesium fluoride ceramics. J Am Ceram Soc 1988, 71: C-136C-137.
[22]
TT Basiev, ME Doroshenko, PP Fedorov, et al. Efficient laser based on CaF2–SrF2–YbF3 nanoceramics. Opt Lett 2008, 33: 521523.
[23]
AA Demidenko, EA Garibin, SD Gain, et al. Scintillation parameters of BaF2 and BaF2:Ce3+ ceramics. Opt Mater 2010, 32: 12911293.
[24]
N Kuramoto, H Taniguchi. Transparent AlN ceramics. J Mater Sci Lett 1984, 3: 471474.
[25]
F Chen, F Zhang, J Wang, et al. Microstructure and optical properties of transparent aluminum oxynitride ceramics by hot isostatic pressing. Scripta Mater 2014, 81: 2023.
[26]
J Wang, F Zhang, F Chen, et al. Fabrication of aluminum oxynitride (γ-AlON) transparent ceramics with modified gelcasting. J Am Ceram Soc 2014, 97: 13531355.
[27]
H Mandal. New developments in α-SiAlON ceramics. J Eur Ceram Soc 1999, 19: 23492357.
[28]
C Chlique, O Merdrignac-Conanec, N Hakmeh, et al. Transparent ZnS ceramics by sintering of high purity monodisperse nanopowders. J Am Ceram Soc 2013, 96: 30703074.
[29]
P Colomban, M Havel. Raman imaging of stress-induced phase transformation in transparent ZnSe ceramic and sapphire single crystals. J Raman Spectrosc 2002, 33: 789795.
[30]
NN Kolesnikov, VV Kveder, EB Borisenko, et al. Structure and properties of CdTe ceramics produced through nanopowder compaction. J Cryst Growth 2005, 285: 339344.
[31]
F Fu-k’ang, AK Kuznetsov, ÉK Keler. Zirconates of the rare earth elements and their physicochemical properties. Report 1. Zirconates of lanthanum, neodymium and cerium. Russ Chem Bull 1964, 13: 10701075.
[32]
DR Clarke, SR Phillpot. Thermal barrier coating materials. Mater Today 2005, 8: 2229.
[33]
A Zhang, M , Z Yang, et al. Systematic research on RE2Zr2O7 (RE = La, Nd, Eu and Y) nanocrystals: Preparation, structure and photoluminescence characterization. Solid State Sci 2008, 10: 7481.
[34]
J Trojan-Piegza, E Zych, M Kosinska. Fabrication and spectroscopic properties of nanocrystalline La2Hf2O7:Pr. Radiat Meas 2010, 45: 432434.
[35]
KW Eberman, BJ Wuensch, JD Jorgensen. Order–disorder transformations induced by composition and temperature change in (SczYb1–z)2Ti2O7 pyrochlores, prospective fuel cell materials. Solid State Ionics 2002, 148: 521526.
[36]
N Kim, CP Grey. 17O MAS NMR study of the oxygen local environments in the anionic conductors Y2(B1–xBx)2O7 (B, B’ = Sn, Ti, Zr). J Solid State Chem 2003, 175: 110115.
[37]
M Uno, A Kosuga, M Okui, et al. Photoelectrochemical study of lanthanide zirconium oxides, Ln2Zr2O7 (Ln = La, Ce, Nd and Sm). J Alloys Compd 2006, 420: 291297.
[38]
H Yokoi, Y Arita, T Matsui, et al. EXAFS study of (La1−xMx)2Zr2O7 (M = Nd and Ce). J Nucl Mater 1996, 238: 163168.
[39]
RC Ewing. Nuclear waste disposal–pyrochlore (A2B2O7): Nuclear waste form for the immobilization of plutonium and “minor” actinides. J Appl Phys 2004, 95: 59495971.
[40]
KR Whittle, LMD Cranswick, SA Redfern, et al. Lanthanum pyrochlores and the effect of yttrium addition in the systems La2–xYxZr2O7 and La2–xYxHf2O7. J Solid State Chem 2009, 182: 442450.
[41]
Y Ji, D Jiang, T Fen, et al. Fabrication of transparent La2Hf2O7 ceramics from combustion synthesized powders. Mater Res Bull 2005, 40: 553559.
[42]
J Trojan-Piegza, S Gierlotka, E Zych, et al. Spectroscopic studies of nanopowder and nanoceramics La2Hf2O7:Pr scintillator. J Am Ceram Soc 2014, 97: 15951601.
[43]
H Yi, X Zou, Y Yang, et al. Fabrication of highly transmitting LaGdHf2O7 ceramics. J Am Ceram Soc 2011, 94: 41204122.
[44]
Z Wang, GH Zhou, F Zhang, et al. Fabrication and properties of La2–xGdxHf2O7 transparent ceramics. J Lumin 2016, 169: 612615.
[45]
L An, A Ito, T Goto. Fabrication of transparent La2Zr2O7 by reactive spark plasma sintering. Key Eng Mater 2011, 484: 135138.
[46]
T Feng, DR Clarke, D Jiang, et al. Neodymium zirconate (Nd2Zr2O7) transparent ceramics as a solid state laser material. Appl Phys Lett 2011, 98: 151105.
[47]
Z Wang, G Zhou, X Qin, et al. Fabrication of LaGdZr2O7 transparent ceramic. J Eur Ceram Soc 2013, 33: 643646.
[48]
Z Wang, G Zhou, X Qin, et al. Transparent La2–xGdxZr2O7 ceramics obtained by combustion method and vacuum sintering. J Alloys Compd 2014, 585: 497502.
[49]
Z Wang, G Zhou, XP Qin, et al. Fabrication and phase transition of La2–xLuxZr2O7 transparent ceramics. J Eur Ceram Soc 2014, 34: 39513958.
[50]
L An, A Ito, T Goto. Highly transparent lutetium titanium oxide produced by spark plasma sintering. J Eur Ceram Soc 2011, 31: 237240.
[51]
Y Ji, D Jiang, J Shi. Preparation and spectroscopic properties of La2Hf2O7:Tb. Mater Lett 2005, 59: 868871.
[52]
Y Ji, D Jiang, J Shi. La2Hf2O7:Ti4+ ceramic scintillator for X-ray imaging. J Mater Res 2005, 20: 567570.
[53]
Z Wang, G Zhou, J Zhang, et al. Effect of Gd content on luminescence properties of Eu3+-doped La2–xGdxZr2O7 transparent ceramics. J Am Ceram Soc 2015, 98: 24762479.
[54]
Z Wang, G Zhou, J Zhang, et al. Luminescence properties of Eu3+-doped lanthanum gadolinium hafnates transparent ceramics. Opt Mater 2017, 71: 58.
[55]
MA Subramanian, G Aravamudan, GV Subba Rao. Oxide pyrochlores—A review. Prog Solid State Chem 1983, 15: 55143.
[56]
ZJ Wang. Fabrication and properties of Ln2M2O7 (M = Zr, Hf) transparent ceramics. Ph.D. Thesis. Beijing, China: University of Chinese Academy of Sciences, 2015.
[57]
A Chaudhry, A Canning, R Boutchko, et al. First-principles studies of Ce-doped RE2M2O7 (RE = Y, La; M = Ti, Zr, Hf): A class of non-scintillators. J Appl Phys 2011, 109: 083708.
[58]
K Shimamura, T Arima, K Idemitsu, et al. Thermophysical properties of rare-earth-stabilized zirconia and zirconate pyrochlores as surrogates for actinide-doped zirconia. Int J Thermophys 2007, 28: 10741084.
[59]
PER Blanchard, R Clements, BJ Kennedy, et al. Does local disorder occur in the pyrochlore zirconates? Inorg Chem 2012, 51: 13237-13244.
[60]
T Hayashi. Translucent ceramic, method for producing the same, optical component, and optical device. U.S. Patent 0,233,406. 2008.
[61]
BP Mandal, N Garg, SM Sharma, et al. Preparation, XRD and Raman spectroscopic studies on new compounds RE2Hf2O7 (RE = Dy, Ho, Er, Tm, Lu, Y): Pyrochlores or defect-fluorite? J Solid State Chem 2006, 179: 19901994.
[62]
KJ Moreno, RS Rodrigo, AF Fuentes. Direct synthesis of A2(Ti(1−y)Zry)2O7 (A = Gd3+,Y3+) solid solutions by ball milling constituent oxides. J Alloys Compd 2005, 390: 230235.
[63]
KJ Moreno, AF Fuentes, J Garcıa-Barriocanal, et al. Mechanochemical synthesis and ionic conductivity in the Gd2(Sn1–yZry)2O7 (0 ≤ y ≤ 1) solid solution. J Solid State Chem 2006, 179: 323330.
[64]
D Jin, X Yu, H Yang, et al. Hydrothermal synthesis and luminescence properties of Yb3+ doped rare earth stannates. J Alloys Compd 2009, 474: 557560.
[65]
L Gao, Y An, H Zhu, et al. Hydrothermal synthesis and photoluminescence properties of Y2Zr2O7:Tb3+ phosphors. J Mater Sci 2011, 46: 13371340.
[66]
E Pavitra, G Seeta Rama Raju, JS Yu. Solvothermal synthesis and luminescent properties of Y2Ti2O7:Eu3+ spheres. Phys Status Solidi RRL 2013, 7: 224227.
[67]
Y Mao, T-J Park, F Zhang, et al. Environmentally friendly methodologies of nanostructure synthesis. Small 2007, 3: 11221139.
[68]
Y Mao, X Guo, JY Huang, et al. Luminescent nanocrystals with A2B2O7 composition synthesized by a kinetically modified molten salt method. J Phys Chem C 2009, 113: 12041208.
[69]
AV Shlyakhtina, LG Shcherbakova, AV Knotko. Studies of new order–disorder structural transitions in Ln2M2O7 (Ln = Lu, Gd; M = Ti). Ferroelectrics 2003, 294: 175190.
[70]
AV Shlyakhtina, LG Shcherbakova, AV Knotko, et al. Study of the fluorite–pyrochlore–fluorite phase transitions in Ln2Ti2O7 (Ln = Lu, Yb, Tm). J Solid State Electrochem 2004, 8: 661667.
[71]
CL Wan, W Pan, Q Xu, et al. Effect of point defects on the thermal transport properties of (LaxGd1−x)2Zr2O7: Experiment and theoretical model. Phys Rev B 2006, 74: 144109.
[72]
Z-G Liu, J-H Ouyang, Y Zhou. Preparation and thermophysical properties of (NdxGd1–x)2Zr2O7 ceramics. J Mater Sci 2008, 43: 35963603.
[73]
B-Z Zhou, G-H Zhou, L-Q An, et al. Morphology- controlled synthesis of yttrium hafnate by oxalate co-precipitation method and the growth mechanism. J Alloys Compd 2009, 481: 434437.
[74]
BC LaCourse, AB Hardy, HL Rétot, et al. Ceramic scintillator body and scintillation device. U.S. Patent 0012787. 2012.
[75]
H Kido, S Komarneni, R Roy. Preparation of La2Zr2O7 by sol–gel route. J Am Ceram Soc 1991, 74: 422424.
[76]
X Li, H Cai, L Ding, et al. Synthesis and luminescence properties of La2Ti2O7:Er3+ nanocrystals with pyrochlore structure. J Alloys Compd 2012, 541: 3640.
[77]
M Saif, M Shebl, A Mbarek, et al. Synthesis of non-toxic phosphor material based on pyrochlore-type dititanate (Eu3+/Y2Ti2O7). J Photochem Photobiol A 2015, 301: 15.
[78]
Y Tong, P Xue, F Jian, et al. Preparation and characterization of Y2Zr2O7 nanocrystals and their photocatalytic properties. Mat Sci Eng B 2008, 150: 194198.
[79]
NA Dhas, KC Patil. Combustion synthesis and properties of fine-particle rare-earth-metal zirconates, Ln2Zr2O7. J Mater Chem 1993, 3: 12891294.
[80]
Y Liao, D Jiang, YM Ji, et al. Combustion synthesis of nanosized Y2Hf2O7 and Lu2Hf2O7 powders. Key Eng Mater 2005, 280–283: 643646.
[81]
A Zhang, M , G Zhou, et al. Combustion synthesis and photoluminescence of Eu3+,Dy3+-doped La2Zr2O7 nanocrystals. J Phys Chem Solids 2006, 67: 24302434.
[82]
N Orlovskaya, Y Chen, N Miller, et al. Glycine–nitrate synthesis of Sr doped La2Zr2O7 pyrochlore powder. Adv Appl Ceram 2011, 110: 5457.
[83]
X Zou, G Zhou, H Yi, et al. Fabrication of transparent Y2Zr2O7 ceramics from combustion-synthesized powders. J Am Ceram Soc 2011, 94: 10021004.
[84]
Z Wang, G Zhou, X Qin, et al. Two-phase LaLuZr2O7 transparent ceramic with high transparency. J Am Ceram Soc 2014, 97: 20352037.
[85]
H Yi, Z Wang, G Zhou, et al. Highly transparent LaYZr2O7 ceramic fabricated by slip casting. Ceram Int 2016, 42: 20702073.
[86]
X-Q Zou, G-H Zhou, H-L Yi, et al. Fabrication of transparent Y2Hf2O7 ceramic from combustion synthesized powders. J Inorg Mater 2011, 26: 929932.
[87]
G Zhou, Z Wang, B Zhou, et al. Fabrication of transparent Y2Hf2O7 ceramics via vacuum sintering. Opt Mater 2013, 35: 774777.
[88]
SF Wang, J Zhang, DW Luo, et al. Transparent ceramics: Processing, materials and applications. Prog Solid State Chem 2013, 41: 2054.
[89]
YM Ji. Exploration and luminescence properties of hafnate ceramic scintillators. Ph.D. Thesis. Shanghai Institute of Ceramics, Chinese Academy of Sciences, 2006.
[90]
XQ Zou. Fabrication and luminescence properties of RE2Hf2O7/RE2Zr2O7 transparent ceramics. Master Thesis. Shanghai Institute of Ceramics, Chinese Academy of Sciences, 2011.
[91]
U Anselmi-Tamburini, JN Woolman, ZA Munir. Transparent nanometric cubic and tetragonal zirconia obtained by high-pressure pulsed electric current sintering. Adv Funct Mater 2007, 17: 32673273.
[92]
D Galusek, J Sedláček, J Chovanec, et al. The influence of MgO, Y2O3 and ZrO2 additions on densification and grain growth of submicrometre alumina sintered by SPS and HIP. Ceram Int 2015, 41: 96929700.
[93]
I Reimanis, H-J Kleebe. A review on the sintering and microstructure development of transparent spinel (MgAl2O4). J Am Ceram Soc 2009, 92: 14721480.
[94]
L Gan, Y-J Park, H Kim, et al. Fabrication of submicron- grained IR-transparent Y2O3 ceramics from commercial nano-raw powders. Ceram Int 2015, 41: 1199211998.
[95]
K Serivalsatit, J Ballato. Submicrometer grain-sized transparent erbium-doped scandia ceramics. J Am Ceram Soc 2010, 93: 36573662.
[96]
U Peuchert, Y Menke. Optoceramics, optical elements manufactured thereof and their use as well as imaging optics. U.S. Patent 7,710,656. 2010.
[97]
TC Lu, XH Chang, JQ Qi, et al. Low-temperature high-pressure preparation of transparent nanocrystalline MgAl2O4 ceramics. Appl Phys Lett 2006, 88: 213120.
[98]
D Hreniak, M Bettinelli, A Speghini, et al. The f–f emission of Pr3+ ion as an optical probe for the structural properties of YAG nanoceramics. J Nanosci Nanotechnol 2009, 9: 63156319.
[99]
U Peuchert, Y Menke. Active optoceramics with cubic crystal structure, method of production of the optoceramics, and uses thereof. U.S. Patent 8,197,711. 2012.
[100]
A Borisevich, M Korzhik, P Lecoq. Luminescence of Ce doped oxygen crystalline compounds based on Hf and Ba. Nucl Instrum Meth A 2003, 497: 206209.
[101]
LH Birxner. Structural and luminescent properties of the Ln2Hf2O7-type rare earth hafnates. Mat Res Bull 1984, 19: 143149.
[102]
X Wang, J Xie, Z Wang, et al. Fabrication and properties of Y2Ti2O7 transparent ceramics with excess Y content. Ceram Int 2018, 44: 95149518.
[103]
Y Kintaka, T Hayashi, A Honda, et al. Abnormal partial dispersion in pyrochlore lanthanum zirconate transparent ceramics. J Am Ceram Soc 2012, 95: 28992905.
[104]
MM Gentleman, DR Clarke. Luminescence sensing of temperature in pyrochlore zirconate materials for thermal barrier coatings. Surf Coat Technol 2005, 200: 12641269.
Journal of Advanced Ceramics
Pages 289-306
Cite this article:
WANG Z, ZHOU G, JIANG D, et al. Recent development of A2B2O7 system transparent ceramics. Journal of Advanced Ceramics, 2018, 7(4): 289-306. https://doi.org/10.1007/s40145-018-0287-z

1251

Views

70

Downloads

113

Crossref

N/A

Web of Science

125

Scopus

15

CSCD

Altmetrics

Received: 11 June 2018
Accepted: 19 June 2018
Published: 18 December 2018
© The author(s) 2018

Open Access The articles published in this journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Return