AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (13.5 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Photocurrent density and electrical properties of Bi0.5Na0.5TiO3-BaNi0.5Nb0.5O3 ceramics

Mingqiang ZHONGa,bQin FENGcChanglai YUANa,b( )Xiao LIUa,bBaohua ZHUbLiufang MENGbChangrong ZHOUa,bJiwen XUa,bJiang WANGa,b( )Guanghui RAOa,b,d( )
Guangxi Key Laboratory of Information Materials, Guilin University of Electronic Technology, Guilin 541004, China
College of Material Science and Engineering, Guilin University of Electronic Technology, Guilin 541004, China
School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China
Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China
Show Author Information

Abstract

In this work, the (1-x)Bi0.5Na0.5TiO3-xBaNi0.5Nb0.5O3 (BNT-BNN; 0.00 ≤ x ≤ 0.20) ceramics were prepared via a high-temperature solid-state method. The crystalline structures, photovoltaic effect, and electrical properties of the ceramics were investigated. According to X-ray diffraction, the system shows a single perovskite structure. The samples show the normal ferroelectric loops. With the increase of BNN content, the remnant polarization (Pr) and coercive field (Ec) decrease gradually. The optical band gap of the samples narrows from 3.10 to 2.27 eV. The conductive species of grains and grain boundaries in the ceramics are ascribed to the double ionized oxygen vacancies. The open-circuit voltage (Voc) of ~15.7 V and short-circuit current (Jsc) of ~1450 nA/cm2 are obtained in the 0.95BNT-0.05BNN ceramic under 1 sun illumination (AM1.5G, 100 mW/cm2). A larger Voc of 23 V and a higher Jsc of 5500 nA/cm2 are achieved at the poling field of 60 kV/cm under the same light conditions. The study shows this system has great application prospects in the photovoltaic field.

References

[1]
Nayak PK, Mahesh S, Snaith HJ, et al. Photovoltaic solar cell technologies: Analyzing the state of the art. Nat Rev Mater 2019, 4: 269-285.
[2]
Zhang KW, Wang SH, Yang Y. A one-structure-based piezo-tribo-pyro-photoelectric effects coupled nanogenerator for simultaneously scavenging mechanical, thermal, and solar energies. Adv Energy Mater 2017, 7: 1601852.
[3]
Ma N, Zhang KW, Yang Y. Photovoltaic-pyroelectric coupled effect induced electricity for self-powered photodetector system. Adv Mater 2017, 29: 1703694.
[4]
Ji Y, Zhang KW, Yang Y. A one-structure-based multieffects coupled nanogenerator for simultaneously scavenging thermal, solar, and mechanical energies. Adv Sci 2018, 5: 1700622.
[5]
Chen L, Luo BC, Chan NY, et al. Enhancement of photovoltaic properties with Nb modified (Bi, Na) TiO3-BaTiO3 ferroelectric ceramics. J Alloys Compd 2014, 587: 339-343.
[6]
Chen J, Pei W, Chen G, et al. Greatly enhanced photocurrent in inorganic perovskite [KNbO3]0.9[BaNi0.5Nb0.5O3-σ]0.1 ferroelectric thin-film solar cell. J Am Ceram Soc 2018, 101: 4892-4898.
[7]
Qi J, Ma N, Yang Y. Photovoltaic-pyroelectric coupled effect based nanogenerators for self-powered photodetector system. Adv Mater Interfaces 2018, 5: 1701189.
[8]
Song K, Zhao RD, Wang ZL, et al. Sensors: Conjuncted pyro-piezoelectric effect for self-powered simultaneous temperature and pressure sensing. Adv Mater 2019, 31: 1970257.
[9]
Song K, Ma N, Mishra YK, et al. Achieving light-induced ultrahigh pyroelectric charge density toward self-powered UV light detection. Adv Electron Mater 2019, 5: 1800413.
[10]
Choi T, Lee S, Choi YJ, et al. Switchable ferroelectric diode and photovoltaic effect in BiFeO3. Science 2009, 324: 63-66.
[11]
Qi J, Ma N, Ma XC, et al. Enhanced photocurrent in BiFeO3 materials by coupling temperature and thermo-phototronic effects for self-powered ultraviolet photodetector system. ACS Appl Mater Interfaces 2018, 10: 13712-13719.
[12]
Zenkevich A, Matveyev Y, Maksimova K, et al. Giant bulk photovoltaic effect in thin ferroelectric BaTiO3 films. Phys Rev B 2014, 90: 161409.
[13]
Ma N, Yang Y. Enhanced self-powered UV photoresponse of ferroelectric BaTiO3 materials by pyroelectric effect. Nano Energy 2017, 40: 352-359.
[14]
Zhao K, Ouyang B, Yang Y. Enhancing photocurrent of radially polarized ferroelectric BaTiO3 materials by ferro-pyro-phototronic effect. iScience 2018, 3: 208-216.
[15]
Ma N, Yang Y. Boosted photocurrent in ferroelectric BaTiO3 materials via two dimensional planar-structured contact configurations. Nano Energy 2018, 50: 417-424.
[16]
Li DX, Shen ZY, Li ZP, et al. P-E hysteresis loop going slim in Ba0.3Sr0.7TiO3-modified Bi0.5Na0.5TiO3 ceramics for energy storage applications. J Adv Ceram 2020, 9: 183-192.
[17]
Zhang DL, Feng L, Huang WC, et al. Oxygen vacancy-induced ferromagnetism in Bi4NdTi3FeO15 multiferroic ceramics. J Appl Phys 2016, 120: 154105.
[18]
Roukos R, Zaiter N, Chaumont D. Relaxor behaviour and phase transition of perovskite ferroelectrics-type complex oxides (1-x)Na0.5Bi0.5TiO3-xCaTiO3 system. J Adv Ceram 2018, 7: 124-142.
[19]
Li P, Li W, Liu S, et al. Reduced leakage current, enhanced ferroelectric and dielectric properties of (La, Fe)-codoped Bi0.5Na0.5TiO3-based thin films. Ceram Int 2015, 41: S344-S348.
[20]
Li W, Zeng H, Hao J, et al. Enhanced dielectric and piezoelectric properties of Mn doped (Bi0.5Na0.5)TiO3- (Bi0.5K0.5)TiO3-SrTiO3 thin films. J Alloys Compd 2013, 580: 157-161.
[21]
Gao Z, Zhang H, Liu Y, et al. An investigation on the dynamics of domain switching of Bi0.5Na0.5TiO3-based ferroelectric ceramics. Curr Appl Phys 2017, 17: 495-500.
[22]
Acharya SK, Kim TM, Hyung JH, et al. Ferroelectric and piezoelectric properties of lead-free Bi0.5Na0.5TiO3- Bi0.5K0.5TiO3-BaTiO3-thin films near the morphotropic phase boundary. J Alloys Compd 2014, 586: 549-554.
[23]
Grinberg I, Vincent D, Torres M, et al. Perovskite oxides for visible-light-absorbing ferroelectric and photovoltaic materials. Nature 2013, 503: 509-512.
[24]
Xiao H, Dong W, Guo Y, et al. Design for highly piezoelectric and visible/near-infrared photoresponsive perovskite oxides. Adv Mater 2019, 31: 1805802.
[25]
Pang D, Liang T, Deng Y, et al. Dielectric, ferroelectric, and photovoltaic properties of La-doped Bi(Ni2/3Ta1/3)O3- PbTiO3 ceramics. J Alloys Compd 2020, 815: 152191.
[26]
Han F, Zhang YJ, Yuan CL, et al. Photocurrent and dielectric/ferroelectric properties of KNbO3-BaFeO3-δ ferroelectric semiconductors. Ceram Int 2020, 46: 14567-14572.
[27]
Hue MM, Dung NQ, Trung NN, et al. Tunable magnetic properties of Bi0.5Na0.5TiO3 materials via solid solution of NiTiO3. Appl Phys A 2018, 124: 1-7.
[28]
Hung NT, Bac LH, Hoang NT, et al. Structural, optical, and magnetic properties of SrFeO3-δ-modified Bi0.5Na0.5TiO3 materials. Phys B: Condens Matter 2018, 531: 75-78.
[29]
Dung DD, Hung NT, Odkhuu D. Structure, optical and magnetic properties of new Bi0.5Na0.5TiO3-SrMnO3-δ solid solution materials. Sci Rep 2019, 9: 1-10.
[30]
Dung DD, Hung NT. Structural, optical, and magnetic properties of the new (1-x)Bi0.5Na0.5TiO3 + xMgCoO3-δ solid solution system. J Supercond Nov Magn 2020, 33: 1249-1256.
[31]
Parija B, Badapanda T, Panigrahi S. Morphotropic phase boundary in BNT-BZT solid solution: A study by Raman spectroscopy and electromechanical parameters. J Ceram Process Res 2015, 16: 565-571.
[32]
Hue MM, Dung NQ, Phuong LTK, et al. Magnetic properties of (1-x)Bi0.5Na0.5TiO3 + xMnTiO3 materials. J Magn Magn Mater 2019, 471: 164-168.
[33]
Huang YM, Shi DP, Liu LJ, et al. High-temperature impedance spectroscopy of BaFe0.5Nb0.5O3 ceramics doped with Bi0.5Na0.5TiO3. Appl Phys A 2014, 114: 891-896.
[34]
Chen L, Luo BC, Chan NY, et al. Enhancement of photovoltaic properties with Nb modified (Bi, Na)TiO3-BaTiO3 ferroelectric ceramics. J Alloys Compd 2014, 587: 339-343.
[35]
Huang T, Hu ZG, Xu GS, et al. Inherent optical behavior and structural variation in Na0.5Bi0.5TiO3-6%BaTiO3 revealed by temperature dependent Raman scattering and ultraviolet-visible transmittance. Appl Phys Lett 2014, 104: 111908.
[36]
Hajra S, Pradhani N, Choudhary R, et al. Fabrication, dielectric and electrical characteristics of 0.94(BI0.5Na0.5)TiO3-0.06BaTiO3 ceramics. Process Appl Ceram 2019, 13: 24-31.
[37]
Kreisel J, Glazer AM, Bouvier P, et al. High-pressure Raman study of a relaxor ferroelectric: The Na0.5Bi0.5TiO3 perovskite. Phys Rev B 2001, 63: 174106.
[38]
Niranjan MK, Karthik T, Asthana S, et al. Theoretical and experimental investigation of Raman modes, ferroelectric and dielectric properties of relaxor Na0.5Bi0.5TiO3. J Appl Phys 2013, 113: 194106.
[39]
Kreisel J, Glazer AM, Jones G, et al. An X-ray diffraction and Raman spectroscopy investigation of A-site substituted perovskite compounds: The (Na1-xKx)0.5Bi0.5TiO3 (0 ≤ x ≤ 1) solid solution. J Phys: Condens Matter 2000, 12: 3267-3280.
[40]
Chen ZX, Yuan CL, Liu X, et al. Optical and electrical properties of ferroelectric Bi0.5Na0.5TiO3-NiTiO3 semiconductor ceramics. Mater Sci Semicond Process 2020, 115: 105089.
[41]
Han F, Zhang YJ, Yuan CL, et al. Impedance spectroscopy and photovoltaic effect of oxygen defect engineering on KNbO3 ferroelectric semiconductors. J Electron Mater 2020, 49: 6165-6174.
[42]
Bai W, Chen D, Huang Y, et al. Temperature-insensitive large strain response with a low hysteresis behavior in BNT-based ceramics. Ceram Int 2016, 42: 7669-7680.
[43]
Kim JS, Choi BC, Jeong JH, et al. Low-frequency dielectric dispersion and impedance spectroscopy of lead-free (Na0.5Bi0.5)TiO3(NBT) ferroelectric ceramics. J Korean Phy Soc 2009, 55: 879-883.
[44]
Zeb A, Hall DA, Milne SJ. Lead-free piezoelectric K0.5Bi0.5TiO3-Bi(Mg0.5Ti0.5)O3 ceramics with depolarisation temperatures up to ~220 ℃. J Mater Sci: Mater Electron 2015, 26: 9516-9521.
[45]
Zeb A, Bai Y, Button T, et al. Temperature-stable relative permittivity from -70 ℃ to 500 ℃ in (Ba0.8Ca0.2)TiO3-Bi(Mg0.5Ti0.5)O3-NaNbO3 ceramics. J Am Ceram Soc 2014, 97: 2479-2483.
[46]
Hajra S, Sahoo S, Das R, et al. Structural, dielectric and impedance characteristics of (Bi0.5Na0.5)TiO3-BaTiO3 electronic system. J Alloys Compd 2018, 750: 507-514.
[47]
Yan X, Chen X, Li X, et al. Good electrical performances and impedance analysis of (1-x)KNN-xBMM lead-free ceramics. J Mater Sci: Mater El 2018, 29: 4538-4546.
[48]
Liu L, Huang Y, Su C, et al. Space-charge relaxation and electrical conduction in K0.5Na0.5NbO3 at high temperatures. Appl Phys A 2011, 104: 1047-1051.
[49]
Hung NT, Bac LH, Hoang NT, et al. Structural, optical, and magnetic properties of SrFeO3-δ-modified Bi0.5Na0.5TiO3 materials. Phys B: Condens Matter 2018, 531: 75-78.
[50]
Dung DD, Thiet DV, Odkhuu D, et al. Room-temperature ferromagnetism in Fe-doped wide band gap ferroelectric Bi0.5K0.5TiO3 nanocrystals. Mater Lett 2015, 156: 129-133.
[51]
Cao L, Ding Z, Liu X, et al. Photovoltaic properties of Aurivillius Bi4NdTi3FeO15 ceramics with different orientations. J Alloys Compd 2019, 800: 134-139.
[52]
Wu L, Podpirka A, Spanier JE, et al. Ferroelectric, optical, and photovoltaic properties of morphotropic phase boundary compositions in the PbTiO3-BiFeO3-Bi(Ni1/2Ti1/2)O3 system. Chem Mater 2019, 31: 4184-4194.
[53]
Han F, Zhang YJ, Yuan CL, et al. Photocurrent and dielectric/ferroelectric properties of KNbO3-BaFeO3-δ ferroelectric semiconductors. Ceram Int 2020, 46: 14567-14572.
Journal of Advanced Ceramics
Pages 1119-1128
Cite this article:
ZHONG M, FENG Q, YUAN C, et al. Photocurrent density and electrical properties of Bi0.5Na0.5TiO3-BaNi0.5Nb0.5O3 ceramics. Journal of Advanced Ceramics, 2021, 10(5): 1119-1128. https://doi.org/10.1007/s40145-021-0497-7

1344

Views

112

Downloads

31

Crossref

32

Web of Science

33

Scopus

0

CSCD

Altmetrics

Received: 25 January 2021
Revised: 09 May 2021
Accepted: 10 May 2021
Published: 19 July 2021
© The Author(s) 2021

This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Return