AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Journal of Advanced Ceramics Article
PDF (2.2 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Synergistic effect of V2O5 and Bi2O3 on the grain boundary structure of high-frequency NiCuZn ferrite ceramics

Xiuyuan FANa, Guohua BAIa,b( ), Zhenhua ZHANGb, Qiming CHENa, Jiaying JINa, Jiafeng XUa, Xuefeng ZHANGb, Mi YANa,b( )
School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Key Laboratory of Novel Materials for Information Technology of Zhejiang Province, Zhejiang University, Hangzhou 310027, China
Institute of Advanced Magnetic Materials, College of Materials & Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310012, China
Show Author Information

Abstract

High-frequency soft magnetic ferrite ceramics are desired in miniaturized and efficient power electronics but remain extremely challenging to deploy on account of the power loss (Pcv) at megahertz frequencies. Here, we prepared NiCuZn ferrite with superior high-frequency properties by V2O5 and Bi2O3 synergistic doping, which proves to be a potent pathway to reduce Pcv of the ferrite at megahertz frequencies. The sample doped with 800 ppm V2O5 and 800 ppm Bi2O3 yielded the most optimized magnetic properties with a Pcv of 113 kW/m3 (10 MHz, 5 mT, 25 ℃), an initial permeability (μi) of 89, and a saturation induction (Bs) of 340 mT, which is at the forefront of the reported results. These outstanding properties are closely related to the notable grain boundary structure, which features a new type of nano-Bi2Fe4O9 phase around ferrite grains and a Ca/Si/V/O amorphous layer. Our results indicate great strides in correlating the grain boundary structure with multiple-ion doping and set the scene for the developing high-frequency soft magnet ferrites.

Keywords

NiCuZn ferritemegahertz applicationgrain boundaryBi2Fe4O9ion doping

Electronic Supplementary Material

Download File(s)
s40145-022-0585-3_ESM.pdf (858.7 KB)

References

[1]
Liu D, Chen XP, Ying Y, et al. MnZn power ferrite with high Bs and low core loss. Ceram Int 2016, 42: 9152-9156.
Crossref Google Scholar
[2]
Kolano R, Kolano-Burian A, Polak M, et al. Application of rapidly quenched soft magnetic materials in energy-saving electric equipment. IEEE Trans Magn 2014, 50: 2004804.
Crossref Google Scholar
[3]
De la Barrière O, Ragusa C, Appino C, et al. Prediction of energy losses in soft magnetic materials under arbitrary induction waveforms and DC bias. IEEE Trans Ind Electron 2017, 64: 2522-2529.
Crossref Google Scholar
[4]
Iacopi F, van Hove M, Charles M, et al. Power electronics with wide bandgap materials: Toward greener, more efficient technologies. MRS Bull 2015, 40: 390-395.
Crossref Google Scholar
[5]
Chu ZQ, Gao XY, Shi WL, et al. A square-framed ME composite with inherent multiple resonant peaks for broadband magnetoelectric response. Sci Bull 2017, 62: 1177-1180.
Crossref Google Scholar
[6]
Zaspalis V, Tsakaloudi V, Papazoglou E, et al. Development of a new MnZn-ferrite soft magnetic material for high temperature power applications. J Electroceramics 2004, 13: 585-591.
Crossref Google Scholar
[7]
Dimitrijev S, Han J, Haasmann D, et al. Power-switching applications beyond silicon: The status and future prospects of SiC and GaN devices. In: Proceedings of the 2014 29th International Conference on Microelectronics, Belgrade, Serbia, 2014: 43-46.
Crossref
[8]
Taghvaei AH, Shokrollahi H, Janghorban K, et al. Eddy current and total power loss separation in the iron-phosphate-polyepoxy soft magnetic composites. Mater Des 2009, 30: 3989-3995.
Crossref Google Scholar
[9]
Silveyra JM, Ferrara E, Huber DL, et al. Soft magnetic materials for a sustainable and electrified world. Science 2018, 362: eaao0195.
Crossref Google Scholar
[10]
Inoue O, Matsutani N, Kugimiya K. Low loss MnZn-ferrites: Frequency dependence of minimum power loss temperature. IEEE Trans Magn 1993, 29: 3532-3534.
Crossref Google Scholar
[11]
Kawano T, Fujita A, Gotoh S. Analysis of power loss at high frequency for MnZn ferrites. J Appl Phys 2000, 87: 6214-6216.
Crossref Google Scholar
[12]
Stoppels D. Developments in soft magnetic power ferrites. J Magn Magn Mater 1996, 160: 323-328.
Crossref Google Scholar
[13]
Néel ML. Propriétés magnétiques des ferrites; ferrimagnétisme et antiferromagnétisme. Ann Phys 1948, 12: 137-198.
Crossref Google Scholar
[14]
Kogias G, Zaspalis V. New MnZn ferrite with low losses at 500 kHz over a broad temperature range. Phys Procedia 2015, 75: 1286-1293.
Crossref Google Scholar
[15]
Yan M, Yi SB, Fan XY, et al. High-frequency MnZn soft magnetic ferrite by engineering grain boundaries with multiple-ion doping. J Mater Sci Technol 2021, 79: 165-170.
Crossref Google Scholar
[16]
Van der Zaag PJ. New views on the dissipation in soft magnetic ferrites. J Magn Magn Mater 1999, 196-197: 315-319.
Crossref Google Scholar
[17]
Van der Zaag PJ, van der Valk PJ, Rekveldt MT. A domain size effect in the magnetic hysteresis of NiZn-ferrites. Appl Phys Lett 1996, 69: 2927-2929.
Crossref Google Scholar
[18]
Wang SF, Hsu YF, Chen CH. Effects of Nb2O5, TiO2, SiO2, and CaO additions on the loss characteristics of Mn-Zn ferrite. J Electroceramics 2014, 33: 172-179.
Crossref Google Scholar
[19]
Sun K, Lan ZW, Yu Z, et al. Temperature dependence of core losses at high frequency for MnZn ferrites. Phys B Condens Matter 2010, 405: 1018-1021.
Crossref Google Scholar
[20]
Yamamoto Y, Makino A, Yamaguchi T, et al. Fine grained ferrite for low profile transformer. IEEE Trans Magn 1997, 33: 3742-3744.
Crossref Google Scholar
[21]
Botta PM, Bercoff PG, Aglietti EF, et al. Two alternative synthesis routes for MnZn ferrites using mechanochemical treatments. Ceram Int 2006, 32: 857-863.
Crossref Google Scholar
[22]
Stergiou CA, Zaspalis V. The role of prefiring in the development of Mn-Zn spinel ferrites for inductive power transfer. Ceram Int 2015, 41: 4798-4804.
Crossref Google Scholar
[23]
Chen IW, Wang XH. Sintering dense nanocrystalline ceramics without final-stage grain growth. Nature 2000, 404: 168-171.
Crossref Google Scholar
[24]
Gore SK, Tumberphale UB, Jadhav SS, et al. Microwave- assisted synthesis and magneto-electrical properties of Mg-Zn ferrimagnetic oxide nanostructures. Phys B Condens Matter 2018, 530: 177-182.
Crossref Google Scholar
[25]
Fariñas JC, Moreno R, Pérez A, et al. Microwave-assisted solution synthesis, microwave sintering and magnetic properties of cobalt ferrite. J Eur Ceram Soc 2018, 38: 2360-2368.
Crossref Google Scholar
[26]
Ji XR, Chen TQ, Shen C, et al. Magnetic and dielectric properties of NiCuZn ferrite with optimized Cu content and sintered by a two-step process. J Alloys Compd 2022, 898: 162906.
Crossref Google Scholar
[27]
Iqbal MA, Islam MU, Ali I, et al. Study of electrical transport properties of Eu+3 substituted MnZn-ferrites synthesized by co-precipitation technique. Ceram Int 2013, 39: 1539-1545.
Crossref Google Scholar
[28]
Gonchar A, Katynkina S, Letyuk L, et al. The influence of the microstructure parameters on the magnetic losses in soft magnetic ferrites for television engineering. J Magn Magn Mater 2000, 215-216: 224-226.
Crossref Google Scholar
[29]
Sun JJ, Li JB, Sun GL. Effects of La2O3 and Gd2O3 on some properties of Ni-Zn ferrite. J Magn Magn Mater 2002, 250: 20-24.
Crossref Google Scholar
[30]
Phor L, Kumar V. Structural, thermomagnetic, and dielectric properties of Mn0.5Zn0.5GdxFe2-xO4 (x = 0, 0.025, 0.050, 0.075, and 0.1). J Adv Ceram 2020, 9: 243-254.
Crossref Google Scholar
[31]
Ye FJ, Dai HY, Peng K, et al. Effect of Mn doping on the microstructure and magnetic properties of CuFeO2 ceramics. J Adv Ceram 2020, 9: 444-453.
Crossref Google Scholar
[32]
Phor L, Chahal S, Kumar V. Zn2+ substituted superparamagnetic MgFe2O4 spinel-ferrites: Investigations on structural and spin-interactions. J Adv Ceram 2020, 9: 576-587.
Crossref Google Scholar
[33]
Hong Y, Li J, Bai H, et al. Effect of octahedron tilt on the structure and magnetic properties of bismuth ferrite. J Adv Ceram 2020, 9: 641-646.
Crossref Google Scholar
[34]
Luo Q, Su H, Tang XL, et al. Effects of Bi2O3 addition on power loss characteristics of low-temperature-fired NiCuZn ferrites. Ceram Int 2018, 44: 16005-16009.
Crossref Google Scholar
[35]
Kong LB, Li ZW, Lin GQ, et al. Electrical and magnetic properties of magnesium ferrite ceramics doped with Bi2O3. Acta Mater 2007, 55: 6561-6572.
Crossref Google Scholar
[36]
Kaiser M. Influence of V2O5 ion addition on the conductivity and grain growth of Ni-Zn-Cu ferrites. Curr Appl Phys 2010, 10: 975-984.
Crossref Google Scholar
[37]
Žnidaršič A, Drofenik M. High-resistivity grain boundaries in CaO-doped MnZn ferrites for high-frequency power application. J Am Ceram Soc 1999, 82: 359-365.
Crossref Google Scholar
[38]
Qureshi AH. The influence of hafnia and impurities (CaO/SiO2) on the microstructure and magnetic properties of Mn-Zn ferrites. J Cryst Growth 2006, 286: 365-370.
Crossref Google Scholar
[39]
Hussain A, Bai GH, Huo HX, et al. Co2O3 and SnO2 doped MnZn ferrites for applications at 3-5 MHz frequencies. Ceram Int 2019, 45: 12544-12549.
Crossref Google Scholar
[40]
Yan SQ, Liu S, He J, et al. Effects of Co2O3 on electromagnetic properties of NiCuZn ferrites. J Magn Magn Mater 2018, 452: 349-353.
Crossref Google Scholar
[41]
Kogias G, Zaspalis VT. Temperature stable MnZn ferrites for applications in the frequency region of 500 kHz. Ceram Int 2016, 42: 7639-7646.
Crossref Google Scholar
[42]
Tokatlidis S, Kogias G, Zaspalis VT. Low loss MnZn ferrites for applications in the frequency region of 1-3 MHz. J Magn Magn Mater 2018, 465: 727-735.
Crossref Google Scholar
[43]
Zheng YH, Jia LJ, Xu F, et al. Microstructures and magnetic properties of low temparature sintering NiCuZn ferrite ceramics for microwave applications. Ceram Int 2019, 45: 22163-22168.
Crossref Google Scholar
[44]
Wang P, Tang XL, Zhang HW, et al. Effects of Al2O3 addition on the DC-bias-superposition characteristic of the low-temperature-fired NiCuZn ferrites. J Alloys Compd 2019, 803: 812-817.
Crossref Google Scholar
[45]
Yang Y, Li J, Zhang HW, et al. Enhanced gyromagnetic properties of NiCuZn ferrite ceramics for LTCC applications by adjusting MnO2-Bi2O3 substitution. Ceram Int 2018, 44: 19370-19376.
Crossref Google Scholar
[46]
Gore SK, Jadhav SS, Tumberphale UB, et al. Cation distribution, magnetic properties and cubic-perovskite phase transition in bismuth-doped nickel ferrite. Solid State Sci 2017, 74: 88-94.
Crossref Google Scholar
[47]
Waghmare SD, Jadhav VV, Gore SK, et al. Efficient gas sensitivity in mixed bismuth ferrite micro (cubes) and nano (plates) structures. Mater Res Bull 2012, 47: 4169-4173.
Crossref Google Scholar
[48]
Li HY, Zhu ZL, Yang FL, et al. Structure of V2O5-P2O5-Sb2O3-Bi2O3 glass. Int J Miner Metall Mater 2012, 19: 628-635.
Crossref Google Scholar
[49]
Zhang P, Li H, Xu XJ, et al. Preparation of lead-free low-melting glass and its slurry for vacuum glass packaging. In: Proceedings of the 2016 17th International Conference on Electronic Packaging Technology, Wuhan, China, 2016: 528-533.
Crossref
[50]
Maître A, François M, Gachon JC. Experimental study of the Bi2O3-Fe2O3 pseudo-binary system. J Phase Equilibria Diffusion 2004, 25: 59-67.
Crossref Google Scholar
[51]
Catalan G, Scott JF. Physics and applications of bismuth ferrite. Adv Mater 2009, 21: 2463-2485.
Crossref Google Scholar
[52]
Cahn JW. The impurity-drag effect in grain boundary motion. Acta Metall 1962, 10: 789-798.
Crossref Google Scholar
[53]
Hoge CE, Pask JA. Thermodynamics of Solid State Sintering. In: International Round Table Meeting on Sintering, Heroeg Novi, Yugoslavia, 1973.
[54]
Irshad Z, Shah SH, Rafiq MA, et al. First principles study of structural, electronic and magnetic properties of ferromagnetic Bi2Fe4O9. J Alloys Compd 2015, 624: 131-136.
Crossref Google Scholar
[55]
Hanif KM, Meulenberg RW, Strouse GF. Magnetic ordering in doped Cd1-xCoxSe diluted magnetic quantum dots. J Am Chem Soc 2002, 124: 11495-11502.
Crossref Google Scholar
[56]
Liu JW, Zhou XB, Tatarko P, et al. Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in situ formed liquid phase sintering. J Adv Ceram 2020, 9: 193-203.
Crossref Google Scholar
[57]
Bai H, Li J, Hong Y, et al. Enhanced ferroelectricity and magnetism of quenched (1-x)BiFeO3-xBaTiO3 ceramics. J Adv Ceram 2020, 9: 511-516.
Crossref Google Scholar
[58]
Zaspalis VT, Antoniadis E, Papazoglou E, et al. The effect of Nb2O5 dopant on the structural and magnetic properties of MnZn-ferrites. J Magn Magn Mater 2002, 250: 98-109.
Crossref Google Scholar
[59]
Fujita A, Gotoh S. Temperature dependence of core loss in Co-substituted MnZn ferrites. J Appl Phys 2003, 93: 7477-7479.
Crossref Google Scholar
[60]
Xu ZY, Yu Z, Sun K, et al. Microstructure and magnetic properties of Sn-substituted MnZn ferrites. J Magn Magn Mater 2009, 321: 2883-2889.
Crossref Google Scholar
Journal of Advanced Ceramics
Volume 11 Issue 6,
June 2022
Pages 912-921
DOI: 10.1007/s40145-022-0585-3
Cite this article:
FAN X, BAI G, ZHANG Z, et al. Synergistic effect of V2O5 and Bi2O3 on the grain boundary structure of high-frequency NiCuZn ferrite ceramics. Journal of Advanced Ceramics, 2022, 11(6): 912-921. https://doi.org/10.1007/s40145-022-0585-3

1276

Views

179

Downloads

20

Crossref

19

Web of Science

20

Scopus

1

CSCD

Altmetrics
Received: 03 September 2021
Revised: 26 February 2022
Accepted: 01 March 2022
Published: 11 May 2022
© The Author(s) 2022.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Return