AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Home Friction Article
PDF (926.7 KB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Frictional behavior of nanostructured carbon films

Dongfeng DIAO1,2( )Chao WANG2Xue FAN1( )
Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China
Nanosurface Science and Engineering Research Institute, Shenzhen University, Shenzhen 518060, China
Show Author Information

Abstract

We propose a new path for preparing nanostructured carbon films (NCFs) by using electron cyclotron resonance (ECR) plasma sputtering with ion–electron hybrid irradiation for controlling the frictional behavior. The frictional behavior of the NCF was measured by using a pin-on-disk tribometer with a nanoprobe displacement sensor, and the transition curves of the friction coefficient and microdisplacement of the NCFs were examined. The friction mechanism was discussed by transmission electron microscopy (TEM) observation on the wear track. From the results, we found a new method to prepare NCFs, which has the potential to achieve low friction at the early stage of sliding contact. In addition, the technology of ECR plasma with ion–electron hybrid irradiation provides a new vision to rebuild a nanostructured surface from an original surface for controlling the frictional behavior.

References

[1]
Robertson J. Diamond like amorphous carbon. Mater Sci Eng 37:129-132 (2002)
[2]
Lu W, Komvopoulos K. Nanotribological and nanomechanical properties of ultrathin amorphous carbon films synthesized by radio frequency sputtering. ASME J Tribo 123:641-650 (2001)
[3]
Erdemir A, Donnet C. Tribology of diamond-like carbon films: Recent progress and future prospects. J Phys D: Appl Phys 39:R311-R327 (2006)
[4]
Dickrell P L, Argibay N, Erylimaz O L, Erdemir A, Sawyer W G. Temperature and water vapor pressure effects on the friction coefficient of hydrogenated diamond like carbon films. ASME J Tribo 131:032102 (2009)
[5]
Eryilmaz O L, Erdemir A. TOF-SIMS and XPS characterization of diamond-like carbon films after tests in inert and oxidizing environments. Wear 265:244-254 (2008)
[6]
Heimberg J A, Wahl K J, Singer I L, Erdemir A. Superlow friction behavior of diamond-like carbon coatings: Time and speed effects. Appl Phys Lett 78:2449-2451 (2001)
[7]
Sugimoto I, Miyake S. Oriented hydrocarbons transferred from a high performance lubricative amorphous C:H:Si film during sliding in a vacuum. Appl Phys Lett 56:1868-1870 (1990)
[8]
Fukui H, Irie M, Utsumi, Y, Oda K, Ohara, H. An investigation of the wear track on DLC (a-C:H) film by time-of-flight secondary ion mass spectroscopy. Surf Coat Technol 146:378-383 (2001)
[9]
Holmberg K, Ronkainen, H, Laukkanen, A. Friction and wear of coated surfaces-scales, modelling and simulation of tribomechanisms. Surf Coat Technol 202:1034-1049 (2007)
[10]
Scharf T W, Singer I L. Role of transfer film on the friction and wear of metal carbide reinforced amorphous carbon coatings during run-in. Tribo Lett 36:43-53 (2009)
[11]
Wang C, Diao D F, Fan X, Chen C. Graphene sheets embedded carbon film prepared by electron irradiation in ECR plasma. Appl Phys Lett 100:231909 (2012)
[12]
Wang C, Diao D F. Cross-linked graphene layer embedded carbon film prepared using electron irradiation in ECR plasma sputtering. Surf Coat Technol 206:1899-1904 (2011)
[13]
Alexandrou I, Scheibe H J, Kiely C J, Papworth A J, Amaratunga G A J, Schultrich B. Carbon films with an sp(2) network structure. Phys Rev B 60:10903-10907 (1999)
[14]
Hirono S, Umemura S, Tomita M, Kaneko P. Superhard conductive carbon nano crystallite films. Appl Phys Lett 80:425-427 (2002)
[15]
Lau D W M, McCulloch D G, Taylor M B, Patridge J G, Mckenzie D R, Marks N A, Teo E H T, Tay B K. Abrupt stress induced transformation in amorphous carbon films with a highly conductive transition phase. Phys Rev Lett 100:17601 (2008)
[16]
Lau D W M, Moaf A, Taylor M B, Partridge J G, McCulloch D G, Powles R C, McKenzie D R. The structural phases of non-crystalline carbon prepared by physical vapor deposition. Carbon 47:3263-3270 (2009)
[17]
Orwa J O, Andrienko I, Peng J L, Prawer S, Zhang Y B, Lau S P. Thermally induced sp2 clustering in tetrahedral amorphous carbon (ta-C) films. J Appl Phys 96:6286-6297 (2004)
[18]
Fan X, Diao D F, Wang K, Wang C. Multi-functional ECR plasma sputtering system for preparing amorphous carbon and Al-O-Si films. Surf Coat Technol 206:1963-1970 (2011)
[19]
Fan X, Diao D F. Contact mechanisms of transfer layered surface during sliding wear of amorphous carbon film with finite element analysis. ASME J Tribo133:042301 (2011)
[20]
Kelires P C, Gioti M, Logothetidis T S. Interfacial stability and atomistic processes in the a-C/Si.100 heterostructure system. Phys Rev B 59:5074-5081 (1999)
[21]
Patsalas P, Logothetidis T S, Kelires P C. Surface and interface morphology and structure of amorphous carbon thin and multilayer films. Diamond Relat Mater 14:1241-1254 (2005)
[22]
Wang C, Diao D F. Magnetic behavior of graphene sheets embedded carbon film orginated from graphene nanocrystallite. Appl Phys Lett 102:052402 (2013)
Friction
Pages 63-71
Cite this article:
DIAO D, WANG C, FAN X. Frictional behavior of nanostructured carbon films. Friction, 2013, 1(1): 63-71. https://doi.org/10.1007/s40544-013-0003-5

643

Views

20

Downloads

21

Crossref

N/A

Web of Science

24

Scopus

0

CSCD

Altmetrics

Received: 02 November 2012
Revised: 16 January 2013
Accepted: 01 February 2013
Published: 26 March 2013
© The author(s) 2013

This article is published with open access at Springerlink.com

Open Access: This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distri- bution, and reproduction in any medium, provided the original author(s) and source are credited.

Return