AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Friction Article
PDF (17.2 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Tribological behavior and microstructural evolution of lubricating film of silver matrix self-lubricating nanocomposite

Xiao KANG1, Shuang YU2, Hailin YANG1, Yang SUN1, Lei ZHANG1( )
State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China
Shanghai Institute of Astronautical Systems Engineering, Shanghai 201108, China
Show Author Information

Abstract

The aim of this study is to fabricate the nanocomposite with low friction and high wear resistance using binary solid lubricant particles. The microstructure and tribological performance of the nanocomposite are evaluated, and the composition and film thickness of the lubricating film are observed and analyzed by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The nanocomposite exhibited improved tribological properties with a friction coefficient as low as 0.12 and a low wear rate of 2.17 × 10-6 mm3/(N·m) in high-purity nitrogen atmosphere. Decreasing sliding speed can increase lubricating film thickness, and the thickest lubricating film is approximately 125 nm. As the film thickness of the lubricating film exceeded 90 nm, the friction coefficient curves became smooth. In compared with WS2, MoS2 can be more effective in forming the transfer layer on the worn surfaces at the initial stage of the tribological process.

Keywords

lubricating filmmetal matrix self-lubricating compositetribological behaviorbinary solid lubricantsX-ray photoelectron spectroscopy (XPS)

References

[1]
Uflyand I E, Zhinzhilo V A, Burlakova V E. Metal-containing nanomaterials as lubricant additives: State-of-the-art and future development. Friction 7(2): 93-116 (2019)
Crossref Google Scholar
[2]
Li H, Wang J H, Gao S, Chen Q, Peng L M, Liu K H, Wei X L. Superlubricity between MoS2 monolayers. Adv Mater 29(27): 1701474 (2017)
Crossref Google Scholar
[3]
Xiao H P, Liu S H. 2D nanomaterials as lubricant additive: A review. Mater Des 135: 319-332 (2017)
Crossref Google Scholar
[4]
Scharf T W, Prasad S V. Solid lubricants: A review. J Mater Sci 48(2): 511-531 (2013)
Crossref Google Scholar
[5]
Chhowalla M, Amaratunga G A J. Thin films of fullerene-like MoS2 nanoparticles with ultra-low friction and wear. Nature 407(6801): 164-167 (2000)
Crossref Google Scholar
[6]
Tudela I, Cobley A J, Zhang Y. Tribological performance of novel nickel-based composite coatings with lubricant particles. Friction 7(2): 169-180 (2019)
Crossref Google Scholar
[7]
Xiao J K, Wu Y Q, Zhang W, Chen J, Zhang C. Friction of metal-matrix self-lubricating composites: Relationships among lubricant content, lubricating film coverage, and friction coefficient. Friction 8(3): 517-530 (2020)
Crossref Google Scholar
[8]
Chen B B, Yang J, Zhang Q, Huang H, Li H P, Tang H, Li C S. Tribological properties of copper-based composites with copper coated NbSe2 and CNT. Mater Des 75: 24-31 (2015)
Crossref Google Scholar
[9]
Boscher N D, Carmalt C J, Parkin I P. Atmospheric pressure chemical vapour deposition of NbSe2-TiSe2 composite thin films. Appl Surf Sci 256(10): 3178-3182 (2010)
Crossref Google Scholar
[10]
Chen W, Wang Y, Zhang L, Feng C F, Zhou K C. The effect of hot extrusion on mechanical and tribological behavior of Ag-Cu/MoS2 composites. Tribol Trans 59(2): 375-384 (2016)
Crossref Google Scholar
[11]
Rajkumar K, Aravindan S. Tribological behavior of microwave processed copper-nanographite composites. Tribol Int 57: 282-296 (2013)
Google Scholar
[12]
Muratore C, Voevodin A A. Chameleon coatings: Adaptive surfaces to reduce friction and wear in extreme environments. Annu Rev Mater Res 39: 297-324 (2009)
Google Scholar
[13]
Huang S Y, Feng Y, Liu H J, Ding K W, Qian G. Electrical sliding friction and wear properties of Cu-MoS2-graphite-WS2 nanotubes composites in air and vacuum conditions. Mater Sci Eng A 560: 685-692 (2013)
Google Scholar
[14]
Scharf T W, Kotula P G, Prasad S V. Friction and wear mechanisms in MoS2/Sb2O3/Au nanocomposite coatings. Acta Mater 58(12): 4100-4109 (2010)
Google Scholar
[15]
An V, Irtegov Y, de Izarra C. Study of tribological properties of nanolamellar WS2 and MoS2 as additives to lubricants. J Nanomater 2014: 865839 (2014)
Google Scholar
[16]
Meng Y, Su F H, Chen Y Z. Effective lubricant additive of nano-Ag/MWCNTs nanocomposite produced by supercritical CO2 synthesis. Tribol Int 118: 180-188 (2018)
Google Scholar
[17]
Wu J S, Li J F, Zhang L, Qian Z Y. Effects of environment on dry sliding wear behavior of silver-copper based composites containing tungsten disulfide. Trans Nonferrous Met Soc China 27(10): 2202-2213 (2017)
Google Scholar
[18]
Grandin M, Wiklund U. Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials. Wear 398-399: 227-235 (2018)
Google Scholar
[19]
Cheng J, Li F, Zhu S Y, Hao J Y, Yang J, Li W S, Liu W M. High temperature tribological properties of a nickel-alloy-based solid-lubricating composite: Effect of surface tribo-chemistry, counterpart and mechanical properties. Wear 386-387: 39-48 (2017)
Google Scholar
[20]
Hu Y, Wang L, Politis D J, Masen M A. Development of an interactive friction model for the prediction of lubricant breakdown behaviour during sliding wear. Tribol Int 110: 370-377 (2017)
Google Scholar
[21]
Wu Y X, Wang F X, Cheng Y Q, Chen N P. A study of the optimization mechanism of solid lubricant concentration in NiMoS2 self-lubricating composite. Wear 205(1-2): 64-70 (1997)
Google Scholar
[22]
Krupka I, Sperka P, Hartl M. Effect of surface roughness on lubricant film breakdown and transition from EHL to mixed lubrication. Tribol Int 100: 116-125 (2016)
Google Scholar
[23]
Xiao J K, Zhang W, Liu L M, Zhang L, Zhang C. Tribological behavior of copper-molybdenum disulfide composites. Wear 384-385: 61-71 (2017)
Google Scholar
[24]
Cen H, Lugt P M. Film thickness in a grease lubricated ball bearing. Tribol Int 134: 26-35 (2019)
Google Scholar
[25]
Gonçalves D, Graça B, Campos A V, Seabra J, Leckner J, Westbroek R. On the film thickness behaviour of polymer greases at low and high speeds. Tribol Int 90: 435-444 (2015)
Google Scholar
[26]
Wang Y, Chen W, Wang T, Yang H L, Hui X D, Zhang L. Crystallization behavior of sub-surface in (Zr,Cu)95Al5 bulk metallic glass induced by different counter-face materials. Mater Des 111: 213-221 (2016)
Google Scholar
[27]
Spear J C, Ewers B W, Batteas J D. 2D-nanomaterials for controlling friction and wear at interfaces. Nano Today 10(3): 301-314 (2015)
Google Scholar
[28]
Wang Q H, Kalantar-Zadeh K, Kis A, Coleman J N, Strano M S. Electronics and optoelectronics of two-dimensional transition metal dichalcogenides. Nat Nanotechnol 7(11): 699-712 (2012)
Google Scholar
[29]
Chen F Y, Feng Y, Shao H, Zhang X B, Chen J, Chen N N. Friction and wear behaviors of Ag/MoS2/G composite in different atmospheres and at different temperatures. Tribol Lett 47(1): 139-148 (2012)
Google Scholar
[30]
Deng Z, Klimov N N, Solares S D, Li T, Xu H. Cannara R J. Nanoscale interfacial friction and adhesion on supported versus suspended monolayer and multilayer graphene. Langmuir 29(1): 235-243 (2013)
Google Scholar
[31]
Chen Z. Friction reduction effect of soft coatings. J Tribol 141(10): 104501 (2019)
Google Scholar
[32]
Mandrino D, Podgornik B. XPS investigations of tribofilms formed on CrN coatings. Appl Surf Sci 396: 554-559 (2017)
Google Scholar
[33]
Begelinger A, de Gee A W J. Failure of thin film lubrication-A detailed study of the lubricant film breakdown mechanism. Wear 77(1): 57-63 (1982)
Google Scholar
[34]
Tamura Y, Zhao H, Wang C, Morina A, Neville A. Interaction of DLC and B4C coatings with fully formulated oils in boundary lubrication conditions. Tribol Int 93: 666-680 (2016)
Google Scholar
[35]
Rabaso P, Ville F, Dassenoy F, Diaby M, Afanasiev P, Cavoret J, Vacher B, le Mogne T. Boundary lubrication: Influence of the size and structure of inorganic fullerene-like MoS2 nanoparticles on friction and wear reduction. Wear 320: 161-178 (2014)
Google Scholar
[36]
Zhou L H, Wei X C, Ma Z J, Mei B. Anti-friction performance of FeS nanoparticle synthesized by biological method. Appl Surf Sci 407: 21-28 (2017)
Google Scholar
Friction
Volume 9 Issue 5,
October 2021
Pages 941-951
DOI: 10.1007/s40544-020-0379-y
Cite this article:
KANG X, YU S, YANG H, et al. Tribological behavior and microstructural evolution of lubricating film of silver matrix self-lubricating nanocomposite. Friction, 2021, 9(5): 941-951. https://doi.org/10.1007/s40544-020-0379-y

902

Views

35

Downloads

19

Crossref

N/A

Web of Science

21

Scopus

2

CSCD

Altmetrics
Received: 29 November 2019
Revised: 20 March 2020
Accepted: 07 May 2020
Published: 09 November 2020
© The author(s) 2020

This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or for-mat, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Return