AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Home Friction Article
PDF (797.5 KB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Comment | Open Access

Is laser surface texturing good or bad for rolling element bearings?

State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, China
Show Author Information

Abstract

A short commentary on the two research articles published in Friction in 2021 is presented. Both articles reported experimental results of applications of laser surface texturing technology to the raceway of rolling element bearings. After briefly reviewing the main findings of the articles, the arguable problems and distinctions between the two articles are pointed out.

References

[1]
Hsu C-J, Stratmann A, Medina S, Jacobs G, Mücklich F, Gachot C. Does laser surface texturing really have a negative impact on the fatigue lifetime of mechanical components? Friction 9(6): 17661775(2021)
[2]
Vidyasagar K E Ch, Pandey R K, Kalyanasundaram D. An exploration of frictional and vibrational behaviors of textured deep groove ball bearing in the vicinity of requisite minimum load. Friction 9(6): 17491765(2021)
Friction
Pages 1784-1786
Cite this article:
MENG Y. Is laser surface texturing good or bad for rolling element bearings?. Friction, 2021, 9(6): 1784-1786. https://doi.org/10.1007/s40544-021-0519-z

702

Views

31

Downloads

1

Crossref

2

Web of Science

2

Scopus

1

CSCD

Altmetrics

Received: 08 April 2021
Accepted: 13 April 2021
Published: 16 June 2021
© The author(s) 2021

This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Return