AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Friction Article
PDF (2.7 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Review Article | Open Access

Tailored surface textures to increase friction—A review

Henara L. COSTA1( ), Jörg SCHILLE2, Andreas ROSENKRANZ3( )
School of Engineering, Surface Engineering Group, Universidade Federal do Rio Grande, Rio Grande 96203900, Brazil
University of Applied Sciences Mittweida, Laserinstitut Hochschule Mittweida 09648, Germany
Department of Chemical Engineering, Biotechnology and Materials, University of Chile, Santiago 8370459, Chile
Show Author Information

Graphical Abstract

Abstract

Surface textures with micro-scale feature dimensions still hold great potential to enhance the frictional performance of tribological systems. Apart from the ability of surface texturing to reduce friction, surface textures can also be used to intentionally increase friction in various applications that rely on friction for their adequate functioning. Therefore, this review aims at presenting the state-of-the-art regarding textured surfaces for high-friction purposes. After a brief general introduction, the recent trends and future paths in laser surface texturing are summarized. Then, the potential of surface textures to increase friction in different applications including adhesion, movement transmission and control, biomimetic applications, and road-tire contacts is critically discussed. Special emphasis in this section is laid on the involved mechanisms responsible for friction increase. Finally, current short-comings and future research directions are pointed out thus emphasizing the great potential of (laser-based) surface texturing methods for innovations in modern surface engineering.

Keywords

surface texturingtribologylaser processingfriction increase

References

[1]
Shah R, Woydt M, Huq N, Rosenkranz A. Tribology meets sustainability. Ind Lubr Tribol 73(3): 430–435 (2021)
Crossref Google Scholar
[2]
Taylor RI. Tribology and energy efficiency: From molecules to lubricated contacts to complete machines. Faraday Discuss 156: 361–382 (2012)
Crossref Google Scholar
[3]
Holmberg K, Erdemir A. The impact of tribology on energy use and CO2 emission globally and in combustion engine and electric cars. Tribol Int 135: 389–396 (2019)
Crossref Google Scholar
[4]
Holmberg K, Erdemir A. Influence of tribology on global energy consumption, costs and emissions. Friction 5(3): 263–284 (2017)
Crossref Google Scholar
[5]
John S, El-Ghoul Z, Dimkovski Z, Lööf P J, Lundmark J, Mohlin J. Friction between pin and roller of a truck's valvetrain. Surf Topogr: Metrol Prop 7(1): 014001 (2019)
Crossref Google Scholar
[6]
Ballam M H, Karimzadeh F, Enayati M H, Sanati A. Developing a nanostructured surface layer on AISI 316 stainless steel by ultrasonic surface nanocrystallization and evaluating its tribological properties. Surf Topogr: Metrol Prop 9(2): 025010 (2021)
Crossref Google Scholar
[7]
He J Q, Sun J L, Meng Y N, Yan X D. Preliminary investigations on the tribological performance of hexagonal boron nitride nanofluids as lubricant for steel/steel friction pairs. Surf Topogr: Metrol Prop 7(1): 015022 (2019)
Crossref Google Scholar
[8]
Patel P R, Sharma S, Tiwari S K. Tribological properties of aluminium reinforced with differently oriented carbon nanotube: A molecular dynamics study. Surf Topogr: Metrol Prop 9(2): 025035 (2021)
Crossref Google Scholar
[9]
Morais R R Jr, Cardoso G V, Ferreira E S, Costa H L. Surface characterization, mechanical and abrasion resistance of nanocellulose-reinforced wood panels. Surf Topogr: Metrol Prop 8(2): 025011 (2020)
Crossref Google Scholar
[10]
Katta J, Jin Z M, Ingham E, Fisher J. Biotribology of articular cartilage—A review of the recent advances. Med Eng Phys 30(10): 1349–1363 (2008)
Crossref Google Scholar
[11]
Gebeshuber I C. Biotribology inspires new technologies. Nano Today 2(5): 30–37 (2007)
Crossref Google Scholar
[12]
Meng Y G, Xu J, Jin Z M, Prakash B, Hu Y Z. A review of recent advances in tribology. Friction 8(2): 221–300 (2020)
Crossref Google Scholar
[13]
Austin R S, Mullen F, Bartlett D W. Surface texture measurement for dental wear applications. Surf Topogr: Metrol Prop 3(2): 023002 (2015)
Crossref Google Scholar
[14]
Richard C. Lipstick adhesion measurement. In Surface Science and Adhesion in Cosmetics. Mittal K, Bui H, eds. Wiley, 2021: 635–662.
Crossref
[15]
Bui H S, Coleman-Nally D. Film-forming technology and skin adhesion in long-wear cosmetics. In Adhesion in Pharmaceutical, Biomedical and Dental Fields. Mittal K, Etzler F, eds. Hoboken (USA): John Wiley & Sons, Inc., 2017: 141–166.
Crossref
[16]
Sterner O, Aeschlimann R, Zürcher S, Scales C, Riederer D, Spencer N D, Tosatti S G P. Tribological classification of contact lenses: From coefficient of friction to sliding work. Tribol Lett 63(1): 1–13 (2016)
Crossref Google Scholar
[17]
Roba M, Duncan E G, Hill G A, Spencer N D, Tosatti S G P. Friction measurements on contact lenses in their operating environment. Tribol Lett 44(3): 387–397 (2011)
Crossref Google Scholar
[18]
Whitehouse S, Myant C, Cann P M, Stephens A. Fluorescent imaging of razor cartridge/skin lubrication. Surf Topogr: Metrol Prop 9(2): 024001 (2021)
Crossref Google Scholar
[19]
Neumann A, Frank D, Vondenhoff T, Schmitt R. Comparison of two metrological approaches for the prediction of human haptic perception. Surf Topogr: Metrol Prop 4(2): 025004 (2016)
Crossref Google Scholar
[20]
Sergachev D, Matthews D, van der Heide E. Design of bidirectional frictional behaviour for tactile contact using ellipsoidal asperity micro-textures. Friction 10(5): 762–771 (2022)
Crossref Google Scholar
[21]
Marian M, Shah R, Gashi B, Zhang S, Bhavnani K, Wartzack S, Rosenkranz A. Exploring the lubrication mechanisms of synovial fluids for joint longevity—A perspective. Colloids Surf B Biointerfaces 206: 111926 (2021)
Crossref Google Scholar
[22]
Popov V L, Poliakov A M, Pakhaliuk V I. Synovial joints. tribology, regeneration, regenerative rehabilitation and arthroplasty. Lubricants 9(2): 15 (2021)
Crossref Google Scholar
[23]
Meenakshi C V R, Kumar K S, Ramana S V. Tribological aspects on human knee joint - AReview. Mater Today Proc 22: 3100–3105 (2020)
Crossref Google Scholar
[24]
Link JM, Salinas EY, Hu JC, Athanasiou KA. The tribology of cartilage: Mechanisms, experimental techniques, and relevance to translational tissue engineering. Clin Biomech (Bristol, Avon) 79: 104880 (2020)
Crossref Google Scholar
[25]
Laguna L, Sarkar A. Oral tribology: Update on the relevance to study astringency in wines. Tribol Mater Surf Interfaces 11(2): 116–123 (2017)
Crossref Google Scholar
[26]
Sarkar A, Krop E M. Marrying oral tribology to sensory perception: A systematic review. Curr Opin Food Sci 27: 64–73 (2019)
Crossref Google Scholar
[27]
Upadhyay R, Chen J S. Smoothness as a tactile percept: Correlating ‘oral’ tribology with sensory measurements. Food Hydrocoll 87: 38–47 (2019)
Crossref Google Scholar
[28]
Strey N F, Scandian C. Tribological transitions during sliding of zirconia against alumina and ZTA in water. Wear 376–377: 343–351 (2017)
Crossref Google Scholar
[29]
Balarini R, Strey N F, Sinatora A, Scandian C. The influence of initial roughness and circular axial Run-out on friction and wear behavior of Si3N4–Al2O3 sliding in water. Tribol Int 101: 226–233 (2016)
Crossref Google Scholar
[30]
Wang X D, Sato H, Adachi K. Low friction in self-mated silicon carbide tribosystem using nanodiamond as lubricating additive in water. Friction 9(3): 598–611 (2021)
Crossref Google Scholar
[31]
Donato M T, Colaço R, Branco L C, Saramago B. A review on alternative lubricants: Ionic liquids as additives and deep eutectic solvents. J Mol Liq 333: 116004 (2021)
Crossref Google Scholar
[32]
Seed C M, Acharya B, Krim J. QCM study of tribotronic control in ionic liquids and nanoparticle suspensions. Tribol Lett 69(3): 1–12 (2021)
Crossref Google Scholar
[33]
Spikes H. The history and mechanisms of ZDDP. Tribol Lett 17(3): 469–489 (2004)
Crossref Google Scholar
[34]
Spikes H. Friction modifier additives. Tribol Lett 60(1): 1–26 (2015)
Crossref Google Scholar
[35]
Dias H W J, Medeiros A B, Binder C, Rodrigue Neto J B, Klein A N, de Mello J D B. Tribological evaluation of turbostratic 2D graphite as oil additive. Lubricants 9(4): 43 (2021)
Crossref Google Scholar
[36]
Furlan K P, de Mello J D B, Klein A N. Self-lubricating composites containing MoS2: A review. Tribol Int 120: 280–298 (2018)
Crossref Google Scholar
[37]
Scharf T W, Prasad S V. Solid lubricants: A review. J Mater Sci 48(2): 511–531 (2013)
Crossref Google Scholar
[38]
Grützmacher P G, Suarez S, Tolosa A, Gachot C, Song G C, Wang B, Presser V, Mücklich F, Anasori B, Rosenkranz A. Superior wear-resistance of Ti3C2Tx multilayer coatings. ACS Nano 15(5): 8216–8224 (2021)
Crossref Google Scholar
[39]
Wyatt B C, Rosenkranz A, Anasori B. 2D MXenes: Tunable mechanical and tribological properties. Adv Mater 33(17): 2007973 (2021)
Crossref Google Scholar
[40]
Tavares A F, Lopes A P O, Mesquita E A, Almeida D T, Souza J H C, Costa H L. Effect of transfer layers on friction and wear mechanisms in strip drawing tests of commercially coated forming tools. Wear 476: 203733 (2021)
Crossref Google Scholar
[41]
Hamilton D B, Walowit J A, Allen C M. A theory of lubrication by microirregularities. J Basic Eng 88(1): 177–185 (1966)
Crossref Google Scholar
[42]
Anno J N, Walowit J A, Allen C M. Load support and leakage from microasperity-lubricated face seals. J Lubr Technol 91(4): 726–731 (1969)
Crossref Google Scholar
[43]
Etsion I. State of the art in laser surface texturing. J Tribol 127(1): 248–253 (2005)
Crossref Google Scholar
[44]
Rapoport L, Moshkovich A, Perfilyev V, Gedanken A, Koltypin Y, Sominski E, Halperin G, Etsion I. Wear life and adhesion of solid lubricant films on laser-textured steel surfaces. Wear 267(5–8): 1203–1207 (2009)
Crossref Google Scholar
[45]
Shinkarenko A, Kligerman Y, Etsion I. Theoretical analysis of surface-textured elastomer sleeve in lubricated rotary sliding. Tribol Trans 53(3): 376–385 (2010)
Crossref Google Scholar
[46]
Rosenkranz A, Reinert L, Gachot C, Mücklich F. Alignment and wear debris effects between laser-patterned steel surfaces under dry sliding conditions. Wear 318(1–2): 49–61 (2014)
Crossref Google Scholar
[47]
Shimizu J, Nakayama T, Watanabe K, Yamamoto T, Onuki T, Ojima H, Zhou L B. Friction characteristics of mechanically microtextured metal surface in dry sliding. Tribol Int 149: 105634 (2020)
Crossref Google Scholar
[48]
Rodrigues T A, Arencibia R V, Costa H L, da Silva W M. Roughness analysis of electrochemically textured surfaces: Effects on friction and wear of lubricated contacts. Surf Topogr: Metrol Prop 8(2): 024011 (2020)
Crossref Google Scholar
[49]
da Silva L R R, Costa H L. Tribological behavior of gray cast iron textured by maskless electrochemical texturing. Wear 376–377: 1601–1610 (2017)
Crossref Google Scholar
[50]
Braun D, Greiner C, Schneider J, Gumbsch P. Efficiency of laser surface texturing in the reduction of friction under mixed lubrication. Tribol Int 77: 142–147 (2014)
Crossref Google Scholar
[51]
Rosenkranz A, Szurdak A, Gachot C, Hirt G, Mücklich F. Friction reduction under mixed and full film EHL induced by hot micro-coined surface patterns. Tribol Int 95: 290–297 (2016)
Crossref Google Scholar
[52]
Wang X L, Kato K, Adachi K, Aizawa K. The effect of laser texturing of SiC surface on the critical load for the transition of water lubrication mode from hydrodynamic to mixed. Tribol Int 34(10): 703–711 (2001)
Crossref Google Scholar
[53]
Krupka I, Hartl M, Zimmerman M, Houska P, Jang S. Effect of surface texturing on elastohydrodynamically lubricated contact under transient speed conditions. Tribol Int 44(10): 1144–1150 (2011)
Crossref Google Scholar
[54]
Mourier L, Mazuyer D, Ninove F P, Lubrecht A A. Lubrication mechanisms with laser-surface-textured surfaces in elastohydrodynamic regime. Proc Inst Mech Eng Part J J Eng Tribol 224(8): 697–711 (2010)
Crossref Google Scholar
[55]
Choo J W, Glovnea R P, Olver A V, Spikes H A. The effects of three-dimensional model surface roughness features on lubricant film thickness in EHL contacts. J Tribol 125(3): 533–542 (2003)
Crossref Google Scholar
[56]
Costa H L, Hutchings I M. Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions. Tribol Int 40(8): 1227–1238 (2007)
Crossref Google Scholar
[57]
Rosenkranz A, Costa H L, Profito F, Gachot C, Medina S, Dini D. Influence of surface texturing on hydrodynamic friction in plane converging bearings—An experimental and numerical approach. Tribol Int 134: 190–204 (2019)
Crossref Google Scholar
[58]
dos Santos M B, Costa H L, de Mello J D B. Potentiality of triboscopy to monitor friction and wear. Wear 332–333: 1134–1144 (2015)
Crossref Google Scholar
[59]
Gu C X, Meng X H, Xie Y B, Yang Y M. Effects of surface texturing on ring/liner friction under starved lubrication. Tribol Int 94: 591–605 (2016)
Crossref Google Scholar
[60]
Suh N P, Mosleh M, Howard P S. Control of friction. Wear 175(1–2): 151–158 (1994)
Crossref Google Scholar
[61]
Hichri Y, Cerezo V, Do M T, Zahouani H. Effect of particles’ characteristics and road surface's texture on the tire/road friction. Surf Topogr: Metrol Prop 6(3): 034014 (2018)
Crossref Google Scholar
[62]
Yu A B, Niu W Y, Hong X, He Y, Wu M C, Chen Q J, Ding M L. Influence of tribo-magnetization on wear debris trapping processes of textured dimples. Tribol Int 121: 84–93 (2018)
Crossref Google Scholar
[63]
Zhu Y M, Chen J J, Du J J, Fan Y J, Zheng J F. Tribological behavior of laser textured nodular cast iron surface. Ind Lubr Tribol 71(7): 949–955 (2019)
Crossref Google Scholar
[64]
Pettersson U, Jacobson S. Influence of surface texture on boundary lubricated sliding contacts. Tribol Int 36(11): 857–864 (2003)
Crossref Google Scholar
[65]
Gachot C, Hsu C, Suárez S, Grützmacher P, Rosenkranz A, Stratmann A, Jacobs G. Microstructural and chemical characterization of the tribolayer formation in highly loaded cylindrical roller thrust bearings. Lubricants 4(2): 19 (2016)
Crossref Google Scholar
[67]
Hsu C J, Stratmann A, Medina S, Jacobs G, Mücklich F, Gachot C. Does laser surface texturing really have a negative impact on the fatigue lifetime of mechanical components? Friction 9(6): 1766–1775 (2021)
Crossref Google Scholar
[68]
Olver A V, Fowell M T, Spikes H A, Pegg I G. ‘Inlet suction’, a load support mechanism in non-convergent, pocketed, hydrodynamic bearings. Proc Inst Mech Eng Part J J Eng Tribol 220(2): 105–108 (2006)
Crossref Google Scholar
[69]
Fowell M, Olver A V, Gosman A D, Spikes H A, Pegg I. Entrainment and inlet suction: Two mechanisms of hydrodynamic lubrication in textured bearings. J Tribol 129 (2): 336–347 (2006).
Crossref Google Scholar
[70]
Gropper D, Wang L, Harvey T J. Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings. Tribol Int 94: 509–529 (2016)
Crossref Google Scholar
[71]
Gachot C, Rosenkranz A, Hsu S M, Costa H L. A critical assessment of surface texturing for friction and wear improvement. Wear 372–373: 21–41 (2017)
Crossref Google Scholar
[72]
Rosenkranz A, Grützmacher P G, Gachot C, Costa H L. Surface texturing in machine elements—A critical discussion for rolling and sliding contacts. Adv Eng Mater 21(8): 1900194 (2019)
Crossref Google Scholar
[73]
Rosenkranz A, Costa H L, Baykara M Z, Martini A. Synergetic effects of surface texturing and solid lubricants to tailor friction and wear - A review. Tribol Int 155: 106792 (2021)
Crossref Google Scholar
[74]
Lu P, Wood R J K. Tribological performance of surface texturing in mechanical applications—A review. Surf Topogr: Metrol Prop 8(4): 043001 (2020)
Crossref Google Scholar
[75]
Vineeth Kumar V, Senthil Kumaran S. Friction material composite: Types of brake friction material formulations and effects of various ingredients on brake performance—A review. Mater Res Express 6(8): 082005 (2019)
Crossref Google Scholar
[76]
Xiao X M, Yin Y, Bao J S, Lu L J, Feng X J. Review on the friction and wear of brake materials. Adv Mech Eng 8(5): 168781401664730 (2016)
Crossref Google Scholar
[77]
Terleeva O P, Slonova A I, Rogov A B, Matthews A, Yerokhin A. Wear resistant coatings with a high friction coefficient produced by plasma electrolytic oxidation of Al alloys in electrolytes with basalt mineral powder additions. Materials 12(17): 2738 (2019)
Crossref Google Scholar
[78]
Wu J P, Ma B, Li H Y, Ma C N. Friction and wear properties of three different steels against paper-based friction material. Ind Lubr Tribol 71(10): 1206–1212 (2019)
Crossref Google Scholar
[79]
Johnson K L, Kendall K, Roberts A D, Tabor D. Surface energy and the contact of elastic solids. Proc R Soc Lond A 324(1558): 301–313 (1971)
Crossref Google Scholar
[80]
Sutcliffe M P F. Surface finish and friction in cold metal rolling. In Metal Forming Science and Practice. Lenard J G, ed. Oxford (UK): Elsevier Science Ltd., 2002: 19–59.
Crossref
[81]
Costa H L, Hutchings I M. Some innovative surface texturing techniques for tribological purposes. Proc Inst Mech Eng Part J J Eng Tribol 229(4): 429–448 (2015)
Crossref Google Scholar
[82]
Martan J, Moskal D, Kučera M. Laser surface texturing with shifted method—Functional surfaces at high speed. J Laser Appl 31(2): 022507 (2019)
Crossref Google Scholar
[83]
Volpe A, Gaudiuso C, Ancona A. Laser fabrication of anti-icing surfaces: A review. Materials 13(24): 5692 (2020)
Crossref Google Scholar
[84]
Luo X, Yao S L, Zhang H J, Cai M Y, Liu W J, Pan R, Chen C H, Wang X M, Wang L N, Zhong M L. Biocompatible nano-ripples structured surfaces induced by femtosecond laser to rebel bacterial colonization and biofilm formation. Opt Laser Technol 124: 105973 (2020)
Crossref Google Scholar
[85]
Shivakoti I, Kibria G, Cep R, Pradhan B B, Sharma A. Laser surface texturing for biomedical applications: A review. Coatings 11(2): 124 (2021)
Crossref Google Scholar
[86]
Schille J, Schneider L, Mauersberger S, Szokup S, Höhn S, Pötschke J, Reiß F, Leidich E, Löschner U. High-rate laser surface texturing for advanced tribological functionality. Lubricants 8(3): 33 (2020)
Crossref Google Scholar
[87]
Sitar A, Crivellari M, Schille J, Mauersberger S, Löschner U, Golobič I. Improved boiling heat transfer in dry etched microchannels with laser structured surfaces. In ASME 2018 16th International Conference on Nanochannels, Microchannels, and Minichannels, Dubrovnik, Croatia, 2018: V001T02A015.
Crossref Google Scholar
[88]
Birnbaum M. Semiconductor surface damage produced by ruby lasers. J Appl Phys 36(11): 3688–3689 (1965)
Crossref Google Scholar
[89]
Reif J, Varlamova O, Varlamov S, Bestehorn M. The role of asymmetric excitation in self-organized nanostructure formation upon femtosecond laser ablation. Appl Phys A 104(3): 969–973 (2011)
Crossref Google Scholar
[90]
Bonse J, Höhm S, Kirner S V, Rosenfeld A, Krüger J. Laser-induced periodic surface structures—A scientific evergreen. IEEE J Sel Top Quantum Electron 23(3): 9000615 (2017)
Crossref Google Scholar
[91]
Tsukamoto M, Kayahara T, Nakano H, Hashida M, Katto M, Fujita M, Tanaka M, Abe N. Microstructures formation on titanium plate by femtosecond laser ablation. J Phys: Conf Ser 59: 666–669 (2007)
Crossref Google Scholar
[92]
Bruening S, Du K M, Jarczynski M, Gillner A. High-throughput micromachining with ultrashort pulsed lasers and multiple spots. J Laser Appl 32(1): 012003 (2020)
Crossref Google Scholar
[93]
Gillner A, Finger J, Gretzki P, Niessen M, Bartels T, Reininghaus M. High power laser processing with ultrafast and multi-parallel beams. J Laser Micro/Nanoengin 2019: 218550959 (2019).
Google Scholar
[94]
Bonse J, Krüger J, Höhm S, Rosenfeld A. Femtosecond laser-induced periodic surface structures. J Laser Appl 24(4): 042006 (2012)
Crossref Google Scholar
[95]
Gregorčič P, Sedlaček M, Podgornik B, Reif J. Formation of laser-induced periodic surface structures (LIPSS) on tool steel by multiple picosecond laser pulses of different polarizations. Appl Surf Sci 387: 698–706 (2016)
Crossref Google Scholar
[96]
Hirsiger T, Gafner M, Remund S M, Chaja M W, Urniezius A, Butkus S, Neuenschwander B. (2020) Machining metals and silicon with GHz bursts: Surprising tremendous reduction of the specific removal rate for surface texturing applications. In Proceedings Volume 11267 Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXV, San Francisco, USA, SPIE, 2020: 112670T.
Crossref Google Scholar
[97]
Ackerl N, Fisch G, Auerswald J, Wegener K. Evolution of microstructures on stainless steel induced by ultra-short pulsed laser ablation. SN Appl Sci 2(4): 1–10 (2020)
Crossref Google Scholar
[98]
Gedvilas M, Mikšys J, Račiukaitis G. Flexible periodical micro- and nano-structuring of a stainless steel surface using dual-wavelength double-pulse picosecond laser irradiation. RSC Adv 5(92): 75075–75080 (2015)
Crossref Google Scholar
[99]
Hwang T Y, Guo C L. Angular effects of nanostructure-covered femtosecond laser induced periodic surface structures on metals. J Appl Phys 108(7): 073523 (2010)
Crossref Google Scholar
[100]
Dunn A, Carstensen J V, Wlodarczyk K L, Hansen E B, Gabzdyl J, Harrison P M, Shephard J D, Hand D P. Nanosecond laser texturing for high friction applications. Opt Lasers Eng 62: 9–16 (2014)
Crossref Google Scholar
[101]
Röcker C, Loescher A, Delaigue M, Hönninger C, Mottay E, Graf T, Ahmed M A. Flexible sub-1 ps ultrafast laser exceeding 1 kw of output power for high-throughput surface structuring. In Laser Congress 2019 (ASSL, LAC, LS&C), Vienna, OSA, 2019.
Crossref Google Scholar
[102]
Müller M, Aleshire C, Klenke A, Haddad E, Légaré F, Tünnermann A, Limpert J. 104 kW coherently combined ultrafast fiber laser. Opt Lett 45(11): 3083 (2020)
Crossref Google Scholar
[103]
Schille J, Schneider L, Streek A, Kloetzer S, Loeschner U. High-throughput machining using a high-average power ultrashort pulse laser and high-speed polygon scanner. OE 55: 096109 (2016)
Crossref Google Scholar
[104]
Lang V, Roch T, Lasagni A. World record in high speed laser surface microstructuring of polymer and steel using direct laser interference patterning. In Proceedings Volume 9736, Laser-based Micro- and Nanoprocessing X, San Francisco, California, USA, SPIE, 2016: 97360Z.
Crossref Google Scholar
[105]
Xing Y Q, Deng J X, Wu Z, Wu F F. High friction and low wear properties of laser-textured ceramic surface under dry friction. Opt Laser Technol 93: 24–32 (2017)
Crossref Google Scholar
[106]
Eichstädt J, Römer G R B E, Veld A J H I. Towards Friction Control using laser-induced periodic Surface Structures. Phys Procedia 12: 7–15 (2011)
Crossref Google Scholar
[107]
Rung S, Bokan K, Kleinwort F, Schwarz S, Simon P, Klein-Wiele J H, Esen C, Hellmann R. Possibilities of dry and lubricated friction modification enabled by different ultrashort laser-based surface structuring methods. Lubricants 7(5): 43 (2019)
Crossref Google Scholar
[108]
van der Poel S, Mezera M, Römer G W, de Vries E, Matthews D. Fabricating laser-induced periodic surface structures on medical grade cobalt–chrome–molybdenum: Tribological, wetting and leaching properties. Lubricants 7(8): 70 (2019)
Crossref Google Scholar
[109]
Alves-Lopes I, Almeida A, Oliveira V, Vilar R. Influence of laser surface nanotexturing on the friction behaviour of the silicon/sapphire system. Opt Laser Technol 121: 105767 (2020)
Crossref Google Scholar
[110]
Wang Z, Zhao Q Z, Wang C W, Zhang Y. Modulation of dry tribological property of stainless steel by femtosecond laser surface texturing. Appl Phys A 119(3): 1155–1163 (2015)
Crossref Google Scholar
[111]
Schille J. Experimental study on laser surface texturing for friction coefficient enhancement. J Laser Micro 10(3): 245–253 (2015)
Crossref Google Scholar
[112]
Joshi G S, Putignano C, Gaudiuso C, Stark T, Kiedrowski T, Ancona A, Carbone G. Effects of the micro surface texturing in lubricated non-conformal point contacts. Tribol Int 127: 296–301 (2018)
Crossref Google Scholar
[113]
Del Campo A, Greiner C, Arzt E. Contact shape controls adhesion of bioinspired fibrillar surfaces. Langmuir 23(20): 10235–10243 (2007)
Crossref Google Scholar
[114]
Arzt E, Gorb S, Spolenak R. From micro to nano contacts in biological attachment devices. PNAS 100(19): 10603–10606 (2003)
Crossref Google Scholar
[115]
Jin K J, Cremaldi J C, Erickson J S, Tian Y, Israelachvili J N, Pesika N S. Adhesives: biomimetic bidirectional switchable adhesive inspired by the gecko (adv. funct. mater. 5/2014). Adv Funct Mater 24(5): 573 (2014)
Crossref Google Scholar
[116]
Huang W, Wang X. Biomimetic design of elastomer surface pattern for friction control under wet conditions. Bioinspir Biomim 8(4): 046001 (2013)
Crossref Google Scholar
[117]
Drotlef D M, Stepien L, Kappl M, Barnes W J P, Butt H J, del Campo A. Insights into the adhesive mechanisms of tree frogs using artificial mimics. Adv Funct Mater 23(9): 1137–1146 (2013)
Crossref Google Scholar
[118]
Kang M, Park Y M, Kim B H, Seo Y H. Micro- and nanoscale surface texturing effects on surface friction. Appl Surf Sci 345: 344–348 (2015)
Crossref Google Scholar
[119]
Cañas N, Kamperman M, Völker B, Kroner E, McMeeking R M, Arzt E. Effect of nano- and micro-roughness on adhesion of bioinspired micropatterned surfaces. Acta Biomater 8(1): 282–288 (2012)
Crossref Google Scholar
[120]
Sorrentino L, Marfia S, Parodo G, Sacco E. Laser treatment surface: An innovative method to increase the adhesive bonding of ENF joints in CFRP. Compos Struct 233: 111638 (2020)
Crossref Google Scholar
[121]
Hamilton A, Xu Y, Kartal M E, Gadegaard N, Mulvihill D M. Enhancing strength and toughness of adhesive joints via micro-structured mechanical interlocking. Int J Adhesion Adhesives 105: 102775 (2021)
Crossref Google Scholar
[122]
Wang W Q, Wang S Y, Zhang X G, Xu Y X, Tian Y T, Huang H. Enhanced aluminum alloy-polymer friction stir welding joints by introducing micro-textures. Mater Lett 295: 129872 (2021)
Crossref Google Scholar
[123]
Costa H L, Oliveira M M Jr, de Mello J D B. Effect of debris size on the reciprocating sliding wear of aluminium. Wear 376–377: 1399–1410 (2017)
Crossref Google Scholar
[124]
Liu Y F, Su J H, Tan C W, Feng Z W, Zhang H, Wu L J, Chen B, Song X G. Effect of laser texturing on mechanical strength and microstructural properties of hot-pressing joining of carbon fiber reinforced plastic to Ti6Al4V. J Manuf Process 65: 30–41 (2021)
Crossref Google Scholar
[125]
Zhang K D, Guo X H, Wang C Y, Liu F, Sun L N. Effect of plasma-assisted laser pretreatment of hard coatings surface on the physical and chemical bonding between PVD soft and hard coatings and its resulting properties. Appl Surf Sci 509: 145342 (2020)
Crossref Google Scholar
[126]
Liu X L, Song J F, Chen H C, Zhao G, Qiu J H, Ding Q J. Enhanced transfer efficiency of ultrasonic motors with polyimide based frictional materials and surface texture. Sens Actuat A Phys 295: 671–677 (2019)
Crossref Google Scholar
[127]
Dufils J, Faverjon F, Héau C, Donnet C, Benayoun S, Valette S. Combination of laser surface texturing and DLC coating on PEEK for enhanced tribological properties. Surf Coat Technol 329: 29–41 (2017)
Crossref Google Scholar
[128]
Liu X L, Qiu J H, Zhao G. Improved energy conversion efficiency of the ultrasonic motor with surface texture. Ind Lubr Tribol 70(9): 1729–1736 (2018)
Crossref Google Scholar
[129]
Ito S, Takahashi K, Sasaki S. Generation mechanism of friction anisotropy by surface texturing under boundary lubrication. Tribol Int 149: 105598 (2020)
Crossref Google Scholar
[130]
Wang N, Li D H, Song W L, Xiu S C, Meng X Z. Effect of surface texture and working gap on the braking performance of the magnetorheological fluid brake. Smart Mater Struct 25(10): 105026 (2016)
Crossref Google Scholar
[131]
Santos L V, Trava-Airoldi V J, Corat E J, Nogueira J, Leite N F. DLC cold welding prevention films on a Ti6Al4V alloy for space applications. Surf Coat Technol 200(8): 2587–2593 (2006)
Crossref Google Scholar
[132]
Tiner C, Bapat S, Nath S D, Atre S V, Malshe A. Exploring convergence of snake-skin-inspired texture designs and additive manufacturing for mechanical traction. Procedia Manuf 34: 640–646 (2019)
Crossref Google Scholar
[133]
Sánchez J C, Estupiñán H, Toro A. Friction response of bioinspired AISI 52100 steel surfaces texturized by photochemical machining. Surf Topogr: Metrol Prop 9(1): 014001 (2021)
Crossref Google Scholar
[134]
Xu Y, Li Z P, Zhang G Q, Wang G, Zeng Z X, Wang C T, Wang C C, Zhao S C, Zhang Y D, Ren T H. Electrochemical corrosion and anisotropic tribological properties of bioinspired hierarchical morphologies on Ti-6Al-4V fabricated by laser texturing. Tribol Int 134: 352–364 (2019)
Crossref Google Scholar
[135]
Xu Y, Liu W, Zhang G Q, Li Z P, Hu H X, Wang C C, Zeng X Q, Zhao S C, Zhang Y D, Ren T H. Friction stability and cellular behaviors on laser textured Ti-6Al-4V alloy implants with bioinspired micro-overlapping structures. J Mech Behav Biomed Mater 109: 103823 (2020)
Crossref Google Scholar
[136]
Gerthoffert J, Cerezo V, Thiery M, Bouteldja M, Do M T. A Brush-based approach for modelling runway friction assessment device. Int J Pavement Eng 21(13): 1694–1702 (2020)
Crossref Google Scholar
[137]
Sabey B E, Williams T, Lupton G. Factors affecting the friction of tires on wet roads. SAE Transactions 1203-18 (1970)
[138]
Mao C, Lv X, Yang X, Yang Z, Ma Y, Lv S. Design of convex-hull bionic tire tread compounds and mechanism on collaborative improvement of wet resistance and wear resistance. J Appl Polym Sci 138(20): 50446 (2021)
Crossref Google Scholar
[139]
Jin X C, Hou C, Fan X L, Sun Y L, Lv J N, Lu C S. Investigation on the static and dynamic behaviors of non-pneumatic tires with honeycomb spokes. Compos Struct 187: 27–35 (2018)
Crossref Google Scholar
[140]
Zhou H C, Zhai H H, Ding Y M, Wang G L. Numerical investigation of passive control flow to improve tire hydroplaning performance using a V-riblet non-smooth surface. Adv Mech Eng 9(11): 168781401772724 (2017)
Crossref Google Scholar
[141]
Zhang Z W, Luan B, Liu X, Zhang M Q. Effects of surface texture on tire-pavement noise and skid resistance in long freeway tunnels: From field investigation to technical practice. Appl Acoust 160: 107120 (2020)
Crossref Google Scholar
[142]
Zhu X Y, Yang Y, Zhao H D, Jelagin D, Chen F, Gilabert F A, Guarin A. Effects of surface texture deterioration and wet surface conditions on asphalt runway skid resistance. Tribol Int 153: 106589 (2021)
Crossref Google Scholar
[143]
Moreno-Ríos M, Gallardo-Hernández E A, Yáñez-Escoto M J, Márquez-Tamayo L A, Iturbe-Salas E. Evaluation of surface modification in a steel track for the rubber tyred Metro. Wear 426–427: 1265–1271 (2019)
Crossref Google Scholar
[144]
Kawazoe M, Miki N. Tactile samples with variable surface textures to investigate tactile perception characteristic. J Micromech Microeng 30(10): 105011 (2020)
Crossref Google Scholar
[145]
Renganathan P, Schwartz C J. Investigation of human perception of tactile graphics and its dependence on fundamental friction mechanisms. Wear 476: 203729 (2021)
Crossref Google Scholar
[146]
Dione M, Watkins R H, Vezzoli E, Lemaire-Semail B, Wessberg J. Human low-threshold mechanoafferent responses to pure changes in friction controlled using an ultrasonic haptic device. Sci Rep 11: 11227 (2021)
Crossref Google Scholar
[147]
Culbertson H, Kuchenbecker K J. Ungrounded haptic augmented reality system for displaying roughness and friction. IEEE/ASME Trans Mechatron 22(4): 1839–1849 (2017)
Crossref Google Scholar
[148]
Etsion I. Modeling of surface texturing in hydrodynamic lubrication. Friction 1(3): 195–209 (2013)
Crossref Google Scholar
[149]
Grützmacher P G, Profito F J, Rosenkranz A. Multi-scale surface texturing in tribology—Current knowledge and future perspectives. Lubricants 7(11): 95 (2019)
Crossref Google Scholar
[150]
Spikes H A. Sixty years of EHL. Lubr Sci 18(4): 265–291 (2006)
Crossref Google Scholar
[151]
Bi Z M, Mueller D W, Zhang C W J. State of the art of friction modelling at interfaces subjected to elastohydrodynamic lubrication (EHL). Friction 9(2): 207–227 (2021)
Crossref Google Scholar
[152]
Marian M, Weikert T, Tremmel S. On friction reduction by surface modifications in the TEHL cam/tappet-contact-experimental and numerical studies. Coatings 9(12): 843 (2019)
Crossref Google Scholar
[153]
Marian M, Grützmacher P, Rosenkranz A, Tremmel S, Mücklich F, Wartzack S. Designing surface textures for EHL point-contacts—Transient 3D simulations, meta-modeling and experimental validation. Tribol Int 137: 152–163 (2019)
Crossref Google Scholar
[154]
Marian M, Weschta M, Tremmel S, Wartzack S. Simulation of microtextured surfaces in starved EHL contacts using commercial FE software. Matls Perf Charact 6(2): MPC20160010 (2017)
Crossref Google Scholar
[155]
Gu C X, Meng X H, Xie Y B, Li P. A study on the tribological behavior of surface texturing on the nonflat piston ring under mixed lubrication. Proc Inst Mech Eng Part J J Eng Tribol 230(4): 452–471 (2016)
Crossref Google Scholar
[156]
Profito F J, Tomanik E, Zachariadis D C. Effect of cylinder liner wear on the mixed lubrication regime of TLOCRs. Tribol Int 93: 723–732 (2016)
Crossref Google Scholar
Friction
Volume 10 Issue 9,
September 2022
Pages 1285-1304
DOI: 10.1007/s40544-021-0589-y
Cite this article:
COSTA HL, SCHILLE J, ROSENKRANZ A. Tailored surface textures to increase friction—A review. Friction, 2022, 10(9): 1285-1304. https://doi.org/10.1007/s40544-021-0589-y

2317

Views

275

Downloads

68

Crossref

68

Web of Science

66

Scopus

0

CSCD

Altmetrics
Received: 14 October 2021
Revised: 10 November 2021
Accepted: 12 December 2021
Published: 28 March 2022
© The author(s) 2021.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Return