AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Friction Article
PDF (3.4 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

A sulfonated modification of PEEK for ultralow friction

Shihua YUAN, Chenhui ZHANG( )
State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, China
Show Author Information

Graphical Abstract

Abstract

Polyether ether ketone (PEEK) is a widely used material for friction pairs due to its excellent mechanical strength, good wear resistance, and chemical inertness. However, some modifications are necessary when PEEK is used as a water-lubricated friction pair. In this study, a novel sulfonation method was developed to design a water-lubricated friction pair with ultralow friction, good wear resistance, and high loading capacity. PEEK powders were sulfonated using ClSO3H and sintered to form bulk plastic. The sulfonated PEEK (SPEEK) plastic exhibited good tribological properties. At a low sliding speed, the friction coefficient was smaller than 0.02 when a 3 wt% NaCl solution was used as the lubricant. The order of magnitude of the wear rate was as low as 10-8 mm3/(N⋅m). The mechanism of friction reduction was mainly hydration lubrication. The negatively charged –SO3– groups on the friction pair can adsorb hydrated Na+ cations by electrostatic interactions. These hydrated Na+ cations have a high load capacity and low shearing resistance. The ultralow wear mechanism observed in this study is possibly due to ultralow friction properties of the friction pairs prepared through the proposed sulfonation and thermoforming procedures.

Keywords

polyether ether ketone (PEEK)sulfonationhydration lubricationfrictionwear

Electronic Supplementary Material

Download File(s)
40544_0625_ESM.pdf (2 MB)

References

[1]
Klein J. Hydration lubrication. Friction 1(1): 1–23 (2013)
Crossref Google Scholar
[2]
Deng M M, Zhang C H, Li J J, Ma L R, Luo J B. Hydrodynamic effect on the superlubricity of phosphoric acid between ceramic and sapphire. Friction 2(2): 173–181 (2014)
Crossref Google Scholar
[3]
Han T Y, Zhang C H, Luo J B. Macroscale superlubricity enabled by hydrated alkali metal ions. Langmuir 34(38): 11281–11291 (2018)
Crossref Google Scholar
[4]
Han T Y, Zhang C H, Chen X C, Li J J, Wang W Q, Luo J B. Contribution of a tribo-induced silica layer to macroscale superlubricity of hydrated ions. J Phys Chem C 123(33): 20270–20277 (2019)
Crossref Google Scholar
[5]
Han T Y, Zhang C H, Li J J, Yuan S H, Chen X C, Zhang J Y, Luo J B. Origins of superlubricity promoted by hydrated multivalent ions. J Phys Chem Lett 11(1): 184–190 (2020)
Crossref Google Scholar
[6]
Zhang S W, Zhang C H, Hu Y Z, Ma L R. Numerical simulation of mixed lubrication considering surface forces. Tribol Int 140: 105878 (2019)
Crossref Google Scholar
[7]
Ma Q, He T, Khan A M, Wang Q, Chung Y W. Achieving macroscale liquid superlubricity using glycerol aqueous solutions. Tribol Int 160: 107006 (2021)
Crossref Google Scholar
[8]
Ma Q, Wang S J, Dong G N. Macroscale liquid superlubricity achieved with mixtures of fructose and diols. Wear 484: 204037 (2021)
Crossref Google Scholar
[9]
Reddyhoff T, Ewen J P, Deshpande P, Frogley M D, Welch M D, Montgomery W. Macroscale superlubricity and polymorphism of long-chain n-alcohols. Acs Appl Mater Inter 13(7): 9239–9251 (2021)
Crossref Google Scholar
[10]
Lin W F, Klein J. Recent progress in cartilage lubrication. Adv Mater 33(18): 2005513 (2021)
Crossref Google Scholar
[11]
Pitenis A A, Uruena J M, Cooper A C, Angelini T E, Sawyer W G. Superlubricity in gemini hydrogels. J Tribol-T Asme 138(4): 042103 (2016)
Crossref Google Scholar
[12]
Liu W R, Simic R, Liu Y H, Spencer N D. Effect of contact geometry on the friction of acrylamide hydrogels with different surface structures. Friction 10(3): 360–373 (2020)
Crossref Google Scholar
[13]
Wang Z N, Li J J, Liu Y H, Luo J B. Macroscale superlubricity achieved between zwitterionic copolymer hydrogel and sapphire in water. Mater Design 188: 108441 (2020)
Crossref Google Scholar
[14]
Yuan S H, Chen X C, Zhang C H. Reducing friction by control of isoelectric point: A potential method to design artificial cartilage. Adv Mater Interfaces 7(15): 2000485 (2020)
Crossref Google Scholar
[15]
Ren Y L, Zhang L, Xie G X, Li Z B, Chen H, Gong H J, Xu W H, Guo D, Luo J B. A review on tribology of polymer composite coatings. Friction 9(3): 429–470 (2021)
Crossref Google Scholar
[16]
Ma R, Tang T T. Current strategies to improve the bioactivity of PEEK. Int J Mol Sci 15(4): 5426–5445 (2014)
Crossref Google Scholar
[17]
Panayotov I V, Orti V, Cuisinier F, Yachouh J. Polyetheretherketone (PEEK) for medical applications. J Mater Sci-Mater M 27(7): 118 (2016)
Crossref Google Scholar
[18]
Liu W, Yang C, Wu S J, Xie Y J, Chen Y. Design of novel high pressure-resistant hydrothermal fluid sample valve. Chin J Mech Eng-En 21(1): 72–76 (2008)
Crossref Google Scholar
[19]
Liu H, Wang J Z, Jiang P F, Yan F Y. Hydrostatic pressure-dependent wear behavior of thermoplastic polymers in deep sea. Polym Advan Technol 29(8): 2410–2415 (2018)
Crossref Google Scholar
[20]
Nie S L, Guo M, Yin F L, Ji H, Ma Z H, Hu Z, Zhou X. Research on fluid-structure interaction for piston/cylinder tribopair of seawater hydraulic axial piston pump in deep-sea environment. Ocean Eng 219: 108222 (2021)
Crossref Google Scholar
[21]
Sang S, Yang C, Chai H B, Yuan X W, Liu W, Zhang X L. The sulfonated polyetheretherketone with 3D structure modified by two bio-inspired methods shows osteogenic and antibacterial functions. Chem Eng J 420: 130059 (2021)
Crossref Google Scholar
[22]
Lv M, Lv W J, Chen H Z, Zheng F, Liu J, Kong F D, Liu S L, Wang L T. Biotribological properties of nano zirconium dioxide and hydroxyapatite-reinforced polyetheretherketone (HA/ZrO2/PEEK) biocomposites. Iran Polym J 30(11): 1127–1136 (2021)
Crossref Google Scholar
[23]
Zhang J C, Gao X Y, Ma D C, He S, Du B W, Yang W Z, Xie K N, Xie L, Deng Y. Copper ferrite heterojunction coatings empower polyetheretherketone implant with multi-modal bactericidal functions and boosted osteogenicity through synergistic photo/Fenton-therapy. Chem Eng J 422: 130084 (2021)
Crossref Google Scholar
[24]
Gao C Z, Wang Z L, Jiao Z X, Wu Z X, Guo M, Wang Y, Liu J G, Zhang P B. Enhancing antibacterial capability and osseointegration of polyetheretherketone (PEEK) implants by dual-functional surface modification. Mater Design 205: 109733 (2021)
Crossref Google Scholar
[25]
Xiao F, Zhai Y L, Zhou Y F, Xu X, Liu Y F, Ma X C, Gu X H, Wang W. Low-temperature fabrication of titania layer on 3D-printed PEKK for enhancing biocompatibility. Surf Coat Tech 416: 127158 (2021)
Crossref Google Scholar
[26]
Lu H J, Shen L C, Wang C X, Jiang D Z. Sulphonation and characterization of polyethersulphone (PES). Chem J Chinese U 19(5): 833–835 (1998)
Google Scholar
[27]
Lee K H, Chu J Y, Mohanraj V, Kim A R, Song M H, Yoo D J. Enhanced ion conductivity of sulfonated poly(arylene ether sulfone) block copolymers linked by aliphatic chains constructing wide-range ion cluster for proton conducting electrolytes. Int J Hydrogen Energ 45(53): 29297–29307 (2020)
Crossref Google Scholar
[28]
Kim I C, Choi J G, Tak T M. Sulfonated polyethersulfone by heterogeneous method and its membrane performances. J Appl Polym Sci 7(8): 2046–2055 (1999)
Crossref
[29]
Fujita H, Shiraki F, Yoshikawa T, Oshima A, Washio M. Study on functionally gradient proton exchange membrane fabricated by eb irradiation with heterogeneous energy deposition. J Photopolym Sci Tec 23(3): 387–392 (2010)
Crossref Google Scholar
[30]
Dai G M, Zhan L H, Guan C L, Huang M H. The effect of cooling rate on crystallization behavior and tensile properties of CF/PEEK composites. J Polym Eng 41(6): 423–430 (2021)
Crossref Google Scholar
[31]
Barba D, Arias A, Garcia-Gonzalez D. Temperature and strain rate dependences on hardening and softening behaviours in semi-crystalline polymers: Application to PEEK. Int J Solids Struct 182: 205–217 (2020)
Crossref Google Scholar
[32]
Huang J L, Dai Q W, Jin G H, Huang W, Wang X L. Water lubrication of Ni/Al2O3 composite coatings sliding With Si3N4. J Tribol-T ASME 142(10): 104501 (2020)
Crossref Google Scholar
[33]
Liu J J, Wang Z, Yang J, Yin B, Sun Q C, Liu T L, Wang S, Qiao Z H. Study on tribological behaviors of Si3N4 based ceramics sliding against POM under different solutions. Tribol Int 118: 368–372 (2018)
Crossref Google Scholar
[34]
Unal H, Mimaroglu A. Friction and wear characteristics of PEEK and its composite under water lubrication. J Reinf Plast Comp 25(16): 1659–1667 (2006)
Crossref Google Scholar
[35]
Zhang J J, Liu J C, Wang Z X, Chen W, Hu B, Zhang Y, Liao H M, Ma S. Tribological behavior and lubricating mechanism of Si3N4 in artificial seawater. Ceram Int 46(10): 14361–14368 (2020)
Crossref Google Scholar
[36]
Chen W, Hao W H, Gao D Q, Wang Z X, Zhao Z Q, Jia J H, Li H Q, He N R. Tribological Behaviors of Si3N4-hBN against PEEK with Precorrosion in Seawater. Tribol T 64(4): 679–692 (2021)
Crossref Google Scholar
[37]
Ma L R, Gaisinskaya-Kipnis A, Kampf N, Klein J. Origins of hydration lubrication. Nat Commun 6: 6060 (2015)
Crossref Google Scholar
[38]
Hachmi B D, VuKhanh T. Crystallization mechanism in PEEK/carbon fiber composites. J Thermoplast Compos 10(5): 488–501 (1997)
Crossref Google Scholar
[39]
Wang H F, Zhao X G, Liu X C, Chen L, Ma J, Chen C H, Wu Z W, Zhou Y C. Synthesis and DSC analysis of PEEK–PEDEK block copolymer. Abstr Pap Am Chem S 226: U380–U380 (2003)
Google Scholar
[40]
Gong J P, Katsuyama Y, Kurokawa T, Osada Y. Double-network hydrogels with extremely high mechanical strength. Adv Mater 15(14): 1155–1158 (2003)
Crossref Google Scholar
[41]
Chen Q, Zhang X Y, Chen K, Wu X F, Zong T, Feng C A, Zhang D K. Anisotropic hydrogels with enhanced mechanical and tribological performance by magnetically oriented nanohybrids. Chem Eng J 430: 133036 (2022)
Crossref Google Scholar
[42]
Chen J Y, Cui L L, Yan C Q, Xiong D S, Mechanical and tribological study of PVA-pMPDSAH double-network hydrogel prepared by ultraviolet irradiation and freeze-thaw methods for bionic articular cartilage. J Bionic Eng 18(5): 1192–1201 (2021)
Crossref Google Scholar
[43]
Zhang S W, Zhang C H. A new deterministic model for mixed lubricated point contact with high accuracy. J Tribol-T ASME 143(10): 102201 (2021)
Crossref Google Scholar
Friction
Volume 11 Issue 6,
June 2023
Pages 881-893
DOI: 10.1007/s40544-022-0625-6
Cite this article:
YUAN S, ZHANG C. A sulfonated modification of PEEK for ultralow friction. Friction, 2023, 11(6): 881-893. https://doi.org/10.1007/s40544-022-0625-6

554

Views

42

Downloads

20

Crossref

17

Web of Science

18

Scopus

1

CSCD

Altmetrics
Received: 21 December 2021
Revised: 22 February 2022
Accepted: 15 March 2022
Published: 30 July 2022
© The author(s) 2022.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Return