Discover the SciOpen Platform and Achieve Your Research Goals with Ease.
Search articles, authors, keywords, DOl and etc.
MXene possesses great potential in enriching the functionalities of hydrogels due to its unique metallic conductivity, high aspect ratio, near-infrared light (NIR light) responsiveness, and wide tunability, however, the poor compatibility of MXene with hydrogels limits further applications. In this work, we report a uniformly dispersed MXene-functionalized poly-N-isopropylacrylamide (PNIPAM)/poly-2-acrylamido-2-methyl-1-propanesulfonic acid (PAMPS) double network hydrogel (M–DN hydrogel) that can achieve switchable friction regulation by using the NIR light. The dispersity of MXene in hydrogels was significantly improved by incorporating the chitosan (CS) polymer. This M–DN hydrogel showed much low coefficient of friction (COF) at 25 °C due to the presence of hydration layer on hydrogel surface. After illuminating with the NIR light, M–DN hydrogel with good photothermal effect rapidly raised the temperature to above the lower critical solution temperature (LCST), which led to an obvious increase of surface COF owing to the destruction of the hydration layer. In addition, M–DN friction control hydrogel showed good recyclability and controllability by tuning "on-off" of the NIR light. This work highlights the construction of functional MXene hydrogels for intelligent lubrication, which provides insight for interface sensing, controlled transmission, and flexible robotic arms.
407
Views
22
Downloads
11
Crossref
10
Web of Science
10
Scopus
0
CSCD
Altmetrics
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.