Discover the SciOpen Platform and Achieve Your Research Goals with Ease.
Search articles, authors, keywords, DOl and etc.
To date, MoS2 can only be achieved at microscale. Edge pinning effect caused by structure defects is the most obvious barrier to expand the size of structural superlubricity to macroscale. Herein, we plan to pin edge planes of MoS2 with nanospheres, and then the incommensurate structure can be formed between adjacent rolling nanoparticles to reduce friction. The sputtered MoS2 film was prepared by the physical vapor deposition (PVD) in advance. Then enough Cu2O nanospheres (~40 nm) were generated in situ at the edge plane of MoS2 layers by liquid phase synthesis. An incommensurate structure (mismatch angle (θ) = 8°) caused by MoS2 layers was formed before friction. The friction coefficient of the films (5 N, 1,000 r/min) was ~6.0×10−3 at the most. During friction, MoS2 layers pinned on numerous of Cu2O nanoparticles reduced its edge pinning effect and decreased friction. Moreover, much more incommensurate was formed, developing macro-superlubricity.
583
Views
18
Downloads
6
Crossref
6
Web of Science
6
Scopus
0
CSCD
Altmetrics
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.