AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Friction Article
PDF (8.3 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Effect of fatigue load on the bending tribo-corrosion-fatigue behaviors between the main cable wires

Bo WANG1, Dagang WANG1( ), Jihong YE2, Liang TANG1, Hailang CHONG1, Wei XU1, Xinxin ZHANG1, Jianhao CHEN3, Haiyan DENG4, Jie ZHANG5, Guowen YAO6, Magd Abdel WAHAB7
School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou 221116, China
Xuzhou Key Laboratory for Fire Safety of Engineering Structures, China University of Mining and Technology, Xuzhou 221116, China
National Wire Rope Quality Inspection Center, Nantong Product Quality Supervision and Inspection Institute, Nantong 226011, China
Jiangsu Langshan Wire Rope Co., Ltd., Nantong 226003, China
School of Mechatronic Engineering, Southwest Petroleum University, Chengdu 610500, China
School of Civil Engineering, Chongqing Jiaotong University, Chongqing 400074, China
Soete Laboratory, Faculty of Engineering and Architecture, Ghent University, Zwijnaarde B-9052, Belgium
Show Author Information

Graphical Abstract

Abstract

The main cable bent around the saddle of the suspension bridge is subjected to the wind, the vehicle, the bridge’s own weight and the corrosive media. The coupling of the three loads and the environments causes the friction, the corrosion, and the fatigue (tribo-corrosion-fatigue) among the wires inside the main cable. In this paper, a wire bending tribo-corrosion-fatigue test rig was designed and developed. The effect of fatigue load on the bending friction behaviors between the cable wires in ultrapure water and 3.5% NaCl solution was explored. The tribological properties and electrochemical corrosion behaviors under different fatigue loading ranges were investigated. The tribo-corrosion-fatigue interaction between the cable wires was quantitatively characterized, and the mechanism of the interaction was analyzed. The results demonstrate that the increasing fatigue load exacerbates the coupling damage of the cable wires attributed to the enhanced interaction. The findings carry theoretical importance when assessing the main cable’s deterioration and the load-bearing safety of a suspension bridge.

Keywords

bendingtribo-corrosion-fatigueinteractionparallel steel wiresfatigue load

Electronic Supplementary Material

Download File(s)
40544_0830_ESM.pdf (1.4 MB)

References

[1]
Wang D G, Ye J H, Wang B, Abdel Wahab M. Review on the service safety assessment of main cable of long span multi-tower suspension bridge. Appl Sci 11(13): 5920 (2021)
Crossref Google Scholar
[2]
Chong H L, Wang D G, Wang B, Shen X M, Abdel Wahab M. Gradual deterioration behavior of the load-bearing strength of main cable wires in a suspension bridge. Appl Sci 13(1): 129 (2022)
Crossref Google Scholar
[3]
Wang S Q, Wan X, Guo M H, Qiao H, Zhang N, Ye Q. Nonlinear dynamic analysis of the wind–train–bridge system of a long-span railway suspension truss bridge. Buildings 13(2): 277 (2023)
Crossref Google Scholar
[4]
Wang D G, Zhu H L, Gao W L, Zhang D K, Tan D L, Zhao X. Research on dynamic contact and slip mechanisms of parallel steel wires in the main cable of suspension bridge. J Mech Eng 57(11): 228 (2021)
Crossref Google Scholar
[5]
Karanci E, Betti R. Modeling corrosion in suspension bridge main cables. I: Annual corrosion rate. J Bridge Eng 23(6) 04018025 (2018)
Crossref Google Scholar
[6]
Karanci E, Betti R. Modeling corrosion in suspension bridge main cables. II: Long-term corrosion and remaining strength. J Bridge Eng 23(6): 04018026 (2018)
Crossref Google Scholar
[7]
Wang S J, Khatir S, Abdel Wahab M. Proper orthogonal decomposition for the prediction of fretting wear characteristics. Tribol Int 152: 106545 (2020)
Crossref Google Scholar
[8]
Zhang J, Wang D G, Song D Z, Zhang D K, Zhang C L, Wang D A, Araújo J A. Tribo-fatigue behaviors of steel wire rope under bending fatigue with the variable tension. Wear 428–429: 154–161 (2019)
Crossref Google Scholar
[9]
Chen Y P, Meng F M, Gong X S. Interwire wear and its influence on contact behavior of wire rope strand subjected to cyclic bending load. Wear 368–369: 470–484 (2016)
Crossref Google Scholar
[10]
Li H Y, Ren Z Y, Su X L, Shen L L, Huang J M. Study on the fretting wear evolution model of wires with curvature inside metal rubber. Tribol Lett 71(1): 22 (2023)
Crossref Google Scholar
[11]
Wang D G, Li X W, Wang X R, Zhang D K, Wang D A. Dynamic wear evolution and crack propagation behaviors of steel wires during fretting-fatigue. Tribol Int 101: 348–355 (2016)
Crossref Google Scholar
[12]
Shen Y, Zhang D K, Duan J J, Wang D G. Fretting wear behaviors of steel wires under friction-increasing grease conditions. Tribol Int 44(11): 1511–1517 (2011)
Crossref Google Scholar
[13]
Peng Y X, Huang K, Ma C B, Zhu Z C, Chang X D, Lu H, Zhang Q, Xu C M. Friction and wear of multiple steel wires in a wire rope. Friction 11(5): 763–784 (2023)
Crossref Google Scholar
[14]
Chang X D, Huang H B, Peng Y X, Li S X. Friction, wear and residual strength properties of steel wire rope with different corrosion types. Wear 458–459: 203425 (2020)
Crossref Google Scholar
[15]
Wang D G, Song D Z, Wang X R, Zhang D K, Zhang C L, Wang D A, Araújo J A. Tribo-fatigue behaviors of steel wires under coupled tension-torsion in different environmental media. Wear 420–421: 38–53 (2019)
Crossref Google Scholar
[16]
Wang D G, Zhu H L, Xu W, Ye J H, Zhang D K, Abdel Wahab M. Contact and slip behaviors of main cable of the long-span suspension bridge. Eng Fail Anal 136: 106232 (2022)
Crossref Google Scholar
[17]
Wang D G, Wang B, Gao W L, Ye J H, Abdel Wahab M. Dynamic contact behaviors of saddle materials for suspension bridge. Eng Fail Anal 134: 106031 (2022)
Crossref Google Scholar
[18]
Liu Z X, Guo T, Han D G, Li A Q. Experimental study on corrosion-fretting fatigue behavior of bridge cable wires. J Bridge Eng 25(12): 04020104 (2020)
Crossref Google Scholar
[19]
Guo T, Liu Z X, Correia J, de Jesus A M P. Experimental study on fretting-fatigue of bridge cable wires. Int J Fatigue 131: 105321 (2020)
Crossref Google Scholar
[20]
Wang D G, Wang B, Xie G Z, Li C C, Zhang D K, Ge S R. Effect of temperature on tribo-corrosion behaviors of parallel steel wires of main cable in the suspension bridge. Wear 512–513: 204522 (2023)
Crossref Google Scholar
[21]
Diomidis N, Celis J P, Ponthiaux P, Wenger F. Tribocorrosion of stainless steel in sulfuric acid: Identification of corrosion–wear components and effect of contact area. Wear 269(1–2): 93–103 (2010)
Crossref Google Scholar
[22]
Jiang X X. Corrosion and wear of metal. In: The Interaction of Metal Corrosion–wear. Chen Z L, Ed. Beijing: Chemical Industry Press, 2003: 198–221.
[23]
Hou X B, Wang Y X, Dai L Y, Yang Y H, Du J H, Wang Y J, Wan H. Study on the corrosion and wear behaviors of cylinder liner in marine diesel engine burning low sulfur fuel oil. Eng Fail Anal 147: 107151 (2023)
Crossref Google Scholar
[24]
Feng C N, Zhang D K, Chen K, Guo Y B. Study on viscoelastic friction and wear between friction linings and wire rope. Int J Mech Sci 142–143: 140–152 (2018)
Crossref Google Scholar
[25]
Feng C N, Zhang D K, Grecov D, Chen K. Effect of rheological properties of friction-enhancing greases on the friction between friction lining and wire rope. Tribol Int 144: 106143 (2020)
Crossref Google Scholar
[26]
Zhao B, Zhang Y T, Fan Y Y, Yu X T, Zhang Z N, Zhang B C. The three-body abrasive tribological characteristics of the Graphene/h-BN heterostructure film considering defects. Tribol Int 171: 107525 (2022)
Crossref Google Scholar
[27]
Shen, Y, Zhang, D K, Wang, D G, Xu, L M. Effect of contact load on the fretting wear behavior of steel wire. Tribology 30(4): 404–408 (2010) (in Chinese)
Google Scholar
[28]
Li Z Y, Yu H Y, Sun D B. The tribocorrosion mechanism of aluminum alloy 7075-T6 in the deep ocean. Corros Sci 183: 109306 (2021)
Crossref Google Scholar
[29]
Li Z Y, Yu H Y, Sun D B. Structural and microstructural effects produced by microwave sintering over La2O3 doped composites. Ceram Int 47(19): 26692–26703 (2021)
Crossref Google Scholar
[30]
Wang W L, Cui W F, Xiao Z T, Qin G W. The improved corrosion and wear properties of Ti-Zr based alloys with oxide coating in simulated seawater environment. Surf Coat Technol 439: 128415 (2022)
Crossref Google Scholar
[31]
Zhang Y Y, Descartes S, Chromik R R. Influence of WC on third body behaviour during fretting of cold-sprayed Cu MoS2WC composites. Tribol Int 134: 15–25 (2019)
Crossref Google Scholar
[32]
Jing P F, Yu S R, Zhang K F, Ma B H. Effects of load and displacement amplitude on fretting wear behavior of DLC film. Tribology 41(2): 213–222 (2021) (in Chinese)
Google Scholar
[33]
Peng Y X, Chang X D, Sun S S, Zhu Z C, Mi Z T. The friction and wear properties of steel wire rope sliding against itself under impact load. Wear 400–401: 194–206 (2018)
Crossref Google Scholar
[34]
Wang B, Wang D G, Chong H L, Xie G Z, Zhang D K, Ge S R. Tribo-corrosion interaction of the parallel steel wires in the suspension bridges. Friction 11(12): 2221–2237 (2023)
Crossref Google Scholar
[35]
Wang B, Wang D G, Tang L, Chong H L, Xu W, Zhang X X, Zhang C L, Tan D L, Zhao X, Zhang D K, et al. Bending tribo-corrosion-fatigue behaviors between cable wire and saddle material in the suspension bridge. Tribol Int 187: 108711 (2023)
Crossref Google Scholar
[36]
Guan J, Jiang X T, Xiang Q, Yang F, Liu J. Corrosion and tribocorrosion behavior of titanium surfaces designed by electromagnetic induction nitriding for biomedical applications. Surf Coat Technol 409: 126844 (2021)
Crossref Google Scholar
[37]
Ferreira D F, Almeida S M A, Soares R B, Juliani L, Bracarense A Q, de Freitas Cunha Lins V, Junqueira R M R. Synergism between mechanical wear and corrosion on tribocorrosion of a titanium alloy in a Ringer solution. J Mater Res Technol 8(2): 1593–1600 (2019)
Crossref Google Scholar
[38]
Chang X D, Peng Y X, Cheng D Q, Zhu Z C, Wang D G, Lu H, Tang W, Chen G A. Influence of different corrosive environments on friction and wear characteristics of lubricated wire ropes in a multi-layer winding system. Eng Fail Anal 131: 105901 (2022)
Crossref Google Scholar
Friction
Volume 12 Issue 7,
July 2024
Pages 1512-1531
DOI: 10.1007/s40544-023-0830-y
Cite this article:
WANG B, WANG D, YE J, et al. Effect of fatigue load on the bending tribo-corrosion-fatigue behaviors between the main cable wires. Friction, 2024, 12(7): 1512-1531. https://doi.org/10.1007/s40544-023-0830-y

171

Views

8

Downloads

4

Crossref

4

Web of Science

4

Scopus

0

CSCD

Altmetrics
Received: 24 April 2023
Revised: 11 July 2023
Accepted: 20 September 2023
Published: 03 April 2024
© The author(s) 2023.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Return