Fabrication of PMMA nanocomposite biomaterials reinforced by cellulose nanocrystals extracted from rice husk for dental applications

Lassila L V, Vallittu P K. Denture base polymer Alldent Sinomer: Mechanical properties, water sorption and release of residual compounds. J Oral Rehabil 28(7): 607–613 (2001)

Gad M M, Abualsaud R. Behavior of PMMA denture base materials containing titanium dioxide nanoparticles: A literature review. Int J Biomater 2019: 6190610 (2019)

Murakami N, Wakabayashi N, Matsushima R, Kishida A, Igarashi Y. Effect of high-pressure polymerization on mechanical properties of PMMA denture base resin. J Mech Behav Biomed Mater 20: 98–104 (2013)

Alhareb A O, Akil H M, Ahmad Z A. Mechanical properties of PMMA denture base reinforced by nitrile rubber particles with Al₂O₃/YSZ fillers. Procedia Manuf 2: 301–306 (2015)

Darbar U R, Huggett R, Harrison A. Denture fracture: A survey. Br Dent J 176(9): 342–345 (1994)

Fouly A, Taha M, Albahkali T, Ali Shar M, Abdo H S, Nabhan A. Developing artificial intelligence models for predicting the tribo-mechanical properties of HDPE nanocomposite used in artificial hip joints. IEEE Access 12: 14787–14799 (2024)

Li R Z, Ye L, Mai Y W. Application of plasma technologies in fibre-reinforced polymer composites: A review of recent developments. Compos Part A Appl Sci Manuf 28(1): 73–86 (1997)

Paul A, Kesharvani S, Agrawal A, Dwivedi G, Singh V, Saxena K K. Mechanical and tribological properties of nano clay/PMMA composites extruded with a twin-screw extruder. P I Mech Eng E-J Pro https://doi.org/10.1177/0954408923121522 (2023)

Kanie T, Fujii K, Arikawa H, Inoue K. Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers. Dent Mater 16(2): 150–158 (2000)

Asar N V, Albayrak H, Korkmaz T, Turkyilmaz I. Influence of various metal oxides on mechanical and physical properties of heat-cured polymethyl methacrylate denture base resins. J Adv Prosthodont 5(3): 241 (2013)

Alhareb A O, Ahmad Z A. Effect of Al₂O₃/ZrO₂ reinforcement on the mechanical properties of PMMA denture base. J Reinf Plast Compos 30(1): 86–93 (2011)

Alhareb A O, Akil H M, Ahmad Z A. Impact strength, fracture toughness and hardness improvement of PMMA denture base through addition of nitrile rubber/ceramic fillers. Saudi J Dent Res 8(1–2): 26–34 (2017)

Fouly A, Ibrahim A M M, El-Bab A M. Promoting the tribological properties of epoxy composites via using graphene nanoplatelets as a functional additive. KGK-Kautsch Gummi Kunststoffe 73: 25–32 (2020)

Badran A H, Alamro T, Bazuhair R W, Ali Gad El-Mawla A, El-Adben S Z, Fouly A. Investigation of the mechanical behavior of synthesized Al6061/TiO₂ microcomposites using an innovative stir casting method. Nanomaterials 12(10): 1646 (2022)

Jordan J, Jacob K I, Tannenbaum R, Sharaf M A, Jasiuk I. Experimental trends in polymer nanocomposites—A review. Mater Sci Eng A 393(1–2): 1–11 (2005)

Shakeri F, Nodehi A, Atai M. PMMA/double-modified organoclay nanocomposites as fillers for denture base materials with improved mechanical properties. J Mech Behav Biomed Mater 90: 11–19 (2019)

Salahuddin N, El-Kemary M, Ibrahim E. Reinforcement of polymethyl methacrylate denture base resin with ZnO nanostructures. Int J Appl Ceram Technol 15(2): 448–459 (2018)

Salim F M. Tribological and mechanical characteristics of dental fillings nanocomposites. Energy Procedia 157: 512–521 (2019)

Rashed A, Nabhan A. Influence of adding nano graphene and hybrid SiO₂-TiO₂ nano particles on tribological characteristics of polymethyl methacrylate (PMMA). KGK-Kautsch Gummi Kunststoffe 71: 32–37 (2018)

Yang Z, Dong B, Huang Y, Liu L, Yan F Y, Li H L. A study on carbon nanotubes reinforced poly(methyl methacrylate) nanocomposites. Mater Lett 59(17): 2128–2132 (2005)

Farhan F K, Kadhim B B, Ablawa B D, Shakir W A. Wear and friction characteristics of TiO₂–ZnO/PMMA nanocomposites. Eur J Eng Technol Res 2(4): 6–9 (2017)

Ameer A K, Mousa M O, Ali W Y. Tribological behaviour of poly-methyl methacrylate reinforced by multi-walled carbon nanotubes. KGK-Kautsch. Gummi Kunststoffe 71: 40–46 (2018)

Taha M, Fouly A, Abdo H S, Alnaser I A, Abouzeid R, Nabhan A. Unveiling the potential of rice straw nanofiber-reinforced HDPE for biomedical applications: Investigating mechanical and tribological characteristics. J Funct Biomater 14(7): 366 (2023)

Mariano M, El Kissi N, Dufresne A. Cellulose nanocrystals and related nanocomposites: Review of some properties and challenges. J Polym Sci B Polym Phys 52(12): 791–806 (2014)

Iwamoto S, Kai W H, Isogai A, Iwata T. Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy. Biomacromolecules 10(9): 2571–2576 (2009)

Kausch H H, Michler G H. Effect of nanoparticle size and size-distribution on mechanical behavior of filled amorphous thermoplastic polymers. J Appl Polym Sci 105(5): 2577–2587 (2007)

Oksman K, Mathew A P, Bondeson D, Kvien I. Manufacturing process of cellulose whiskers/polylactic acid nanocomposites. Compos Sci Technol 66(15): 2776–2784 (2006)

Fouly A, Albahkali T, Ali Shar M, Abdo H S, Taha M. Casting light on the tribological properties of paraffin-based HDPE enriched with graphene nano-additives: An experimental investigation. Mater Res Express 10(12): 125301 (2023)

Talari F, Qujeq D, Amirian K, Ramezani A, Pourkhalili H, Alhavaz A. Evaluation the effect of cellulose nanocrystalline particles on flexural strength and surface hardness of autoploymerized temporary fixed restoration resin. Int J Adv Biotechnol Res 7: 152–160 (2016)

Sabir M, Ali A, Siddiqui U, Muhammad N, Khan A S, Sharif F, Iqbal F, Shah A T, Rahim A, Rehman I U. Synthesis and characterization of cellulose/hydroxyapatite based dental restorative composites. J Biomater Sci Polym Ed 31(14): 1806–1819 (2020)

Fouly A, Ibrahim A M M, Sherif E M, FathEl-Bab A M R, Badran A H. Effect of low hydroxyapatite loading fraction on the mechanical and tribological characteristics of poly(methyl methacrylate) nanocomposites for dentures. Polymers 13(6): 857 (2021)

Mohazzab P. Archimedes’ principle revisited. J Appl Math Phys 5(4): 836–843 (2017)

Zhao H, Allanson D, Ren X J. Use of shore hardness tests for In-process properties estimation/monitoring of silicone rubbers. J Mater Sci Chem Eng 3(7): 142–147 (2015)

Ünalan F, Gürbüz Ö, Nihan N, Bilgin P, Sermet B. Effect of mica as filler on wear of denture teeth polymethylmethacrylate (PMMA) resin. Balk J Stomatol 11: 133–137 (2007)

Champagne C, Waggoner W, Ditmyer M, Casamassimo P S, MacLean J. Parental satisfaction with preveneered stainless steel crowns for primary anterior teeth. Pediatr Dent 29(6): 465–469 (2007)

Fathi H I, El-Shazly A H, Elkady M F, Madih K. Assessment of new technique for production cellulose nanocrystals from agricultural waste. Mater Sci Forum 928: 83–88 (2018)

Rameshkumar C, Sarojini S, Naresh K, Subalakshmi R. Preparation and characterization of pristine PMMA and PVDF thin film using solution casting process for optoelectronic devices. J Surf Sci Technol 33(1–2): 12 (2017)

Hashem M, Rez M F, Fouad H, Elsarnagawy T, Elsharawy M, Umar A, Assery M, Ansari S G. Influence of titanium oxide nanoparticles on the physical and thermomechanical behavior of poly methyl methacrylate (PMMA): A denture base resin. Sci Adv Mater 9(6): 938–944 (2017)

Ramanathan T, Stankovich S, Dikin D A, Liu H, Shen H, Nguyen S T, Brinson L C. Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties. J Polym Sci B Polym Phys 45(15): 2097–2112 (2007)

Karthick R, Sirisha P, Sankar M R. Mechanical and Tribological Properties of PMMA-Sea Shell based Biocomposite for Dental application. Procedia Mater Sci 6: 1989–2000 (2014)

Elmadani A A, Radović I, Tomić N Z, Petrović M, Stojanović D B, Heinemann R J, Radojević V. Hybrid denture acrylic composites with nanozirconia and electrospun polystyrene fibers. PLoS One 14(12): e0226528 (2019)

Ananthu M, Shamnadh M, Dileep P N. Experimental evaluation on mechanical properties and wear resistance in PMMA seashell bionanocomposite for medical application. Mater Today Proc 5(11): 25657–25666 (2018)

Zebarjad S M, Sajjadi S A, Sdrabadi T E, Sajjadi S A, Yaghmaei A, Naderi B. A study on mechanical properties of PMMA/hydroxyapatite nanocomposite. Engineering 3(8): 795–801 (2011)

Yang K, Ritchie R O, Gu Y Z, Wu S J, Guan J. High volume-fraction silk fabric reinforcements can improve the key mechanical properties of epoxy resin composites. Mater Des 108: 470–478 (2016)

Franklin P, Wood D J, Bubb N L. Reinforcement of poly(methyl methacrylate) denture base with glass flake. Dent Mater 21(4): 365–370 (2005)

Rajkumar K, Sirisha P, Sankar M R. Tribomechanical and surface topographical investigations of poly methyl methacrylate-seashell particle based biocomposite. Procedia Mater Sci 5: 1248–1257 (2014)

Khun N W, Zhang H, Lim L H, Yue C Y, Hu X, Yang J L. Tribological properties of short carbon fibers reinforced epoxy composites. Friction 2(3): 226–239 (2014)

Chang L, Zhang Z, Zhang H, Friedrich K. Effect of nanoparticles on the tribological behaviour of short carbon fibre reinforced poly(etherimide) composites. Tribol Int 38(11–12): 966–973 (2005)

Campos-Sanabria V, Hernández-Sierra M T, Bravo-Sánchez M G, Aguilera-Camacho L D, García-Miranda J S, Moreno K J. Tribological and mechanical characterization of PMMA/HAp nanocomposites obtained by free-radical polymerization. MRS Adv 3(63): 3763–3768 (2018)

Kuminek T, Aniołek K, Młyńczak J. A numerical analysis of the contact stress distribution and physical modelling of abrasive wear in the tram wheel-frog system. Wear 328–329: 177–185 (2015)

Tang W, Zhou Y K, Zhu H, Yang H F. The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact. Appl Surf Sci 273: 199–204 (2013)

Fouly A, Alkalla M G. Effect of low nanosized alumina loading fraction on the physicomechanical and tribological behavior of epoxy. Tribol Int 152: 106550 (2020)