Abstract
In this work, two-stage diffusion bonding of micro-duplex TC4 titanium alloy was carried out to study the flow behavior and constitutive models of the bonding joint and the base metal after the same thermal cycling during the hot forming process. Microstructure and mechanical properties test were used to verify the good quality of the equiaxed fine grain diffusion-welded TC4 alloy. Quasi-static tensile experiment was carried out at temperatures ranging from 750–900 ℃ and strain rates of 0.0001–0.1 s−1. The joint showed the weak dynamic recovery at strain rates of 0.01–0.1 s−1 and temperatures of 750–850 ℃. At strain rates of 0.0001–0.001 s−1 and temperatures of 850–900 ℃, the flow stress of joint presented steady-state characteristics. Different deformation conditions lead to the remarkable difference of dynamic softening performance between the joint and heat-treated base metal, but the flow stress in elastic and strain hardening stages exhibited similar behavior. The strain compensated Arrhenius-type constitutive models of TC4 joint and heat-treated base metal were developed respectively. The fifth-order polynomial functions between the material property correlation coefficients and strain were obtained. The models have shown good correlation, with correlation coefficient values of 0.984 and 0.99. The percentage average absolute relative error for the models were found to be 10% and 9.46%, respectively.
