Discover the SciOpen Platform and Achieve Your Research Goals with Ease.
A 314-type MAB phase V3PB4 with hexagonal crystal structure is synthesized by self-propagating high temperature combustion synthesis (SHS), with the help of the full first-principles predictions for the phase stability and adiabatic combustion temperature of SHS. Using XRD and TEM, V3PB4 crystallizes in the space group of P
Dai F, Zhou Y, Sun W. Segregation of solute atoms (Y, Nb, Ta, Mo and W) in ZrB2 grain boundaries and their effects on grain boundary strengths: a first-principles investigation. Acta Mater 2017;127:312–8. https://doi.org/10.1016/j.actamat.2017.01.048.
Bai Y, Yin H, Song G, He X, Qi X, Gao J, et al. High-fracture-toughness ternary layered ceramics: from the MAX to MAB phases. J Mater Eng 2021;49:1–23. https://doi.org/10.11868/j.issn.1001-1381.2020.001171.
Zhang W, Li S, Wu S, Yao B, Fan S, Bei G, et al. Synthesis and properties of MoAlB composites reinforced with SiC particles. J Adv Ceram 2022;11:495–503. https://doi.org/10.1007/s40145-021-0543-5.
Ni N, Zhang H, Zhou Y. Electronic structure, bonding characteristics, and mechanical behaviors of a new family of Si-containing damage-tolerant MAB phases M5SiB2 (M = IVB-VIB transition metals). J Adv Ceram 2022;11:1–15. https://doi.org/10.1007/s40145-022-0636-9.
Bai Y, Qi X, He X, Song G, Zheng Y, Hao B, et al. Experimental and DFT insights into elastic, magnetic, electrical, and thermodynamic properties of MAB-phase Fe2AlB2. J Am Ceram Soc 2020;103:5837–51. https://doi.org/10.1111/jace.17205.
Qi X, He X, Yin W, Song G, Zheng Y, Bai Y. Stability trend, weak bonding and magnetic properties of the Al-and Si-containing ternary-layered borides MAB Phases. J Am Ceram Soc 2022;106:1513–30. https://doi.org/10.1111/jace.18819.
Kota S, Zapata-Solvas E, Chen Y, Radovic M, Lee WE, Barsoum MW. Isothermal and cyclic oxidation of MoAlB in air from 1100 °C to 1400 °C. J Electrochem Soc 2017;164:C930-8. https://doi.org/10.1149/2.1891713jes.
Benamor A, Kota S, Chiker N, Haddad A, Hadji Y, Natu V, et al. Friction and wear properties of MoAlB against Al2O3 and 100Cr6 steel counterparts. J Eur Ceram Soc 2018;39:868–77. https://doi.org/10.1016/j.jeurceramsoc.2018.10.026.
Song G, Sun D, He X, Qi X, Zheng Y, Gao J, et al. Friction and wear behavior of Fe2AlB2 nanolaminates against GCr15 steel counterpart. Ceram Int 2020;46:19912–8. https://doi.org/10.1016/j.ceramint.2020.05.056.
Mann DK, Xu J, Mordvinova NE, Yannello V, Ziouani Y, Gonzalez-Ballesteros N, et al. Electrocatalytic water oxidation over AlFe2B2. Chem Sci 2019;10:2796–804. https://doi.org/10.1039/c8sc04106g.
Kota S, Sokol M, Barsoum MW. A progress report on the MAB phases: atomically laminated, ternary transition metal borides. Int Mater Rev 2019;65:226–55. https://doi.org/10.1080/09506608.2019.1637090.
Ade M, Hillebrecht H. Ternary borides Cr2AlB2, Cr3AlB4, and Cr4AlB6: the first members of the series (CrB2)CrAl with n = 1, 2, 3 and a unifying concept for ternary borides as MAB-Phases. Inorg Chem 2015;54:6122–35. https://doi.org/10.1021/acs.inorgchem.5b00049.
Zhang H, Dai F, Xiang H, Zhang Z, Zhou Y. Crystal structure of Cr4AlB4: a new MAB phase compound discovered in Cr-Al-B system. J Mater Sci Technol 2019;35:530–4. https://doi.org/10.1016/j.jmst.2018.10.006.
Bai Y, Qi X, He X, Sun D, Kong F, Zheng Y, et al. Phase stability and weak metallic bonding within ternary-layered borides CrAlB, Cr2AlB2, Cr3AlB4,and Cr4AlB6. J Am Ceram Soc 2018;102:3715–27. https://doi.org/10.1111/jace.16206.
Bai Y, Qi X, Duff A, Li N, Kong F, He X, et al. Density functional theory insights into ternary layered boride MoAlB. Acta Mater 2017;132:69–81. https://doi.org/10.1016/j.actamat.2017.04.031.
Kota S, Zapata-Solvas E, Ly A, Lu J, Elkassabany O, Huon A, et al. Synthesis and characterization of an alumina forming nanolaminated boride: MoAlB. Sci Rep-UK 2016;6:26475. https://doi.org/10.1038/srep26475.
Li N, Bai Y, Wang S, Zheng Y, Kong F, Qi X, et al. Rapid synthesis, electrical, and mechanical properties of polycrystalline Fe2AlB2 bulk from elemental powders. J Am Ceram Soc 2017;100:4407–11. https://doi.org/10.1111/jace.15058.
Wang J, Ye TN, Gong Y, Wu J, Miao N, Tada T, et al. Discovery of hexagonal ternary phase Ti2InB2 and its evolution to layered boride TiB. Nat Commun 2019;10:2284. https://doi.org/10.1038/s41467-019-10297-8.
Zhang Q, Zhou Y, San X, Li W, Bao Y, Feng Q, et al. Zr2SeB and Hf2SeB: two new MAB phase compounds with the Cr2AlC-type MAX phase (211 phase) crystal structures. J Adv Ceram 2022;11:1764–76. https://doi.org/10.1007/s40145-022-0646-7.
Bai Y, Srikanth N, Chua CK, Zhou K. Density functional theory study of Mn+1AXn phases: a review. Crit Rev Solid State 2019;44:56–107. https://doi.org/10.1080/10408436.2017.1370577.
Carlsson A, Rosen J, Dahlqvist M. Theoretical predictions of phase stability for orthorhombic and hexagonal ternary MAB phases. Phys Chem Chem Phys 2022;24:11249–58. https://doi.org/10.1039/D1CP05750B.
Bai Y, He X, Sun Y, Zhu C, Li M, Shi L. Chemical bonding and elastic properties of Ti3AC2 phases (A= Si, Ge, and Sn): a first-principle study. Solid State Sci 2010;12:1220–5. https://doi.org/10.1016/j.solidstatesciences.2010.03.007.
Merzhanov A, Borovinskaya I. Historical retrospective of SHS: an autoreview. Int J Self-Propag Hi 2008;17:242–65. https://doi.org/10.3103/S1061386208040079.
Bai Y, He X, Wang R, Sun Y, Zhu C, Wang S, et al. High temperature physical and mechanical properties of large-scale Ti2AlC bulk synthesized by self-propagating high temperature combustion synthesis with pseudo hot isostatic pressing. J Eur Ceram Soc 2013;33:2435–45. https://doi.org/10.1016/j.jeurceramsoc.2013.04.014.
Yeh C, Shen Y. Effects of SiC addition on formation of Ti3SiC2 by self-propagating high-temperature synthesis. J Alloys Compd 2008;461:654–60. https://doi.org/10.1016/j.jallcom.2007.07.088.
Merz J, Richardson P, Cuskelly D. Formation of Mn2AlB2 by induction-assisted self-propagating high-temperature synthesis. Open Ceram 2021;8:100190. https://doi.org/10.1016/j.oceram.2021.100190.
Yin H, He X, Song G, Yu Y, Zheng Y, Bai Y. Ultra-fast synthesis and thermodynamic analysis of MoAlB by self-propagating high temperature combustion synthesis. J Adv Ceram 2023;12:258–67. https://doi.org/10.26599/JAC.2023.9220680.
Morsi K. The diversity of combustion synthesis processing: a review. J Mater Sci 2012;47:68–92. https://doi.org/10.1007/s10853-011-5926-5.
Kresse G, Furthmuller J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys Rev B 1996;54:11169–86. https://doi.org/10.1103/PhysRevB.54.11169.
Perdew JP, Burke K, Ernzerhof M. Generalized gradient approximation made simple. Phys Rev Lett 1996;77:3865–8. https://doi.org/10.1103/PhysRevLett.77.3865.
Togo A, Oba F, Tanaka I. First-principles calculations of the ferroelastic transition between rutile-type and CaCl2-type SiO2 at high pressures. Phys Rev B 2008;78:134106. https://doi.org/PhysRevB.78.134106.
Anderson OL. A simplified method for calculating the debye temperature from elastic constants. J Phys Chem Solid 1963;24:909–17. https://doi.org/10.1016/0022-3697(63)90067-2.
Dahlqvist M, Alling B, Rosén J. Stability trends of MAX phases from first principles. Phys Rev B 2010;81:220102. https://doi.org/10.1103/PhysRevB.81.220102.
Duong T, Gibbons S, Kinra R, Arróyave R. Ab-initio approach to the electronic, structural, elastic, and finite-temperature thermodynamic properties of Ti2AX (A = Al or Ga and X = C or N). J Appl Phys 2011;110:093504. https://doi.org/10.1063/1.3652768.
Golumbfskie WJ, Arroyave R, Shin D, Liu ZK. Finite-temperature thermodynamic and vibrational properties of Al–Ni–Y compounds via first-principles calculations. Acta Mater 2006;54:2291–304. https://doi.org/10.1016/j.actamat.2006.01.013.
Arroyave R, Shin D, Liu ZK. Ab initio thermodynamic properties of stoichiometric phases in the Ni–Al system. Acta Mater 2005;53:1809–19. https://doi.org/10.1016/j.actamat.2004.12.030.
Chen S, Wang L, He G, Li J, Wang C-A. Microstructure and properties of porous Si3N4 ceramics by gelcasting-self-propagating high-temperature synthesis (SHS). J Adv Ceram 2022;11:172–83. https://doi.org/10.1007/s40145-021-0525-7.
Wang P, Kumar R, Sankaran EM, Qi X, Zhang X, Popov D, et al. Vanadium diboride (VB2) synthesized at high pressure: elastic, mechanical, electronic, and magnetic properties and thermal stability. Inorg Chem 2018;57:1096–105. https://doi.org/10.1021/acs.inorgchem.7b02550.
Kovalev DY, Khomenko NY, Shilkin SP. High-temperature X-ray diffraction study of the thermal expansion and stability of nanocrystalline VB2. Inorg Mater 2019;55:1111–7. https://doi.org/10.1134/S0020168519100078.
Li X, Cui H, Zhang R. Electronic, optical and thermal properties of Cr3AlB4 by first-principles calculations. Vacuum 2017;145:234–40. https://doi.org/10.1016/j.vacuum.2017.09.004.
Qi X, Yin W, Jin S, Zhou A, He X, Song G, et al. DFT predictions and experimental confirmation of mechanical behaviour and thermal properties of the Ga-bilayer Mo2Ga2C. J Adv Ceram 2021;11:273–82. https://doi.org/10.21203/rs.3.rs-646047/v1.
Francis B. Finite elastic strain of cubic crystals. Phys Rev 1947;71:809. https://doi.org/10.1103/PhysRev.71.809.
Hug G. Electronic structures of and composition gaps among the ternary carbides Ti2MC. Phys Rev B 2006;74:184113. https://doi.org/10.1103/PhysRevB.74.184113.
Liao T, Wang J, Zhou Y. Chemical bonding and mechanical properties of M2AC (M= Ti, V, Cr, A= Al, Si, P, S) ceramics from first-principles investigations. J Mater Res 2009;24:556–64. https://doi.org/10.1557/JMR.2009.0066.
Bai Y, He X, Wang R, Zhu C. An ab initio study on compressibility of Al-containing MAX-phase carbides. J Appl Phys 2013;114:173709. https://doi.org/10.1063/1.4829282.
Li B, Duan Y, Shen L, Peng M, Qi H. Insights of electronic structures, mechanical properties and thermal conductivities of TM5SiB2 (TM=V, Nb, and Ta) MAB phases. Phil Mag 2022;102:1628–49. https://doi.org/10.1080/14786435.2022.2059118.
Sun Y, Yang A, Duan Y, Shen L, Peng M, Qi H. Electronic, elastic, and thermal properties, fracture toughness, and damage tolerance of TM5Si3B (TM = V and Nb) MAB phases. Int J Refract Met H 2022;103:105781. https://doi.org/10.1016/j.ijrmhm.2022.105781.
Li B, Duan Y, Peng M, Shen L, Qi H. Anisotropic elastic and thermal properties of M2InX (M = Ti, Zr and X = C, N) phases: a first-principles calculation. Metals-basel 2022;12:1628–49. https://doi.org/10.3390/met12071111.
Wu Y, Duan Y, Wang X, Peng M, Shen L, Qi H. Elastic anisotropy and thermal properties of Zr-Al-N ternary nitrides using first-principles explorations. Mater Today Commun 2022;33:104651. https://doi.org/10.1016/j.mtcomm.2022.104651.
Xu L, Shi O, Liu C, Zhu D, Grasso S, Hu C. Synthesis, microstructure and properties of MoAlB ceramics. Ceram Int 2018;44:13396–401. https://doi.org/10.1016/j.ceramint.2018.04.177.
Lu X, Li S, Zhang W, Yu W, Zhou Y. Thermal shock behavior of a nanolaminated ternary boride: MoAlB. Ceram Int 2019;45:9386–9. https://doi.org/10.1016/j.ceramint.2018.08.071.
Amini S, Barsoum MW, El-Raghyy T. Synthesis and mechanical properties of fully dense Ti2SC. J Am Ceram Soc 2007;90:3953–8. https://doi.org/10.1111/j.1551-2916.2007.01999.x.
Wang XH, Zhou YC. Microstructure and properties of Ti3AlC2 prepared by the solid–liquid reaction synthesis and simultaneous in-situ hot pressing process. Acta Mater 2002;50:3143–51. https://doi.org/10.1016/S1359-6454(02)00117-9.
Wang XH, Zhou YC. Layered machinable and electrically conductive Ti2AlC and Ti3AlC2 ceramics: a review. J Mater Sci Technol 2010;26:385–416. https://doi.org/10.1016/S1005-0302(10)60064-3.
Wan DT, Meng FL, Zhou YC, Bao YW, Chen JX. Effect of grain size, notch width, and testing temperature on the fracture toughness of Ti3Si(Al)C2 and Ti3AlC2 using the chevron-notched beam (CNB) method. J Eur Ceram Soc 2008;28:663–9. https://doi.org/10.1016/j.jeurceramsoc.2007.07.011.
This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).