AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Submit Manuscript
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research paper | Open Access

3D vertically aligned microchannel structure to enhance piezoelectric energy harvesting performance of PZT/PVDF&CNTs piezoelectric composites

Limin HouaYu Huana,( )Mupeng Zhengb,( )Yilong LiuaChuilei WangaXinjian WangcChangxiao LiaZhenxing WangdTao Weia,( )
School of Materials Science and Engineering, University of Jinan, Jinan, 250022, China
Key Laboratory of Advanced Functional Materials, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, 100124, China
Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education and International Center for Dielectric Research, Xi'an Jiaotong University, Xi'an, 710049, China
SICC Co.,Ltd, Jinan, 250000, China

Peer review under responsibility of The Chinese Ceramic Society.

Show Author Information

Graphical Abstract

Abstract

Piezoelectric energy harvesters (PEHs) have attracted significant attention with the ability of converting mechanical energy into electrical energy and power the self-powered microelectronic components. Generally, material's superior energy harvesting performance is closely related to its high transduction coefficient (d33×g33), which is dependent on higher piezoelectric coefficient d33 and lower dielectric constant εr of materials. However, the high d33 and low εr are difficult to be simultaneously achieved in piezoelectric ceramics. Herein, lead zirconate titanate (PZT) based piezoelectric composites with vertically aligned microchannel structure are constructed by phase-inversion method. The polyvinylidene fluoride (PVDF) and carbon nanotubes (CNTs) are mixed as fillers to fabricate PZT/PVDF&CNTs composites. The unique structure and uniformly distributed CNTs network enhance the polarization and thus improve the d33. The PVDF filler effectively reduce the εr. As a consequence, the excellent piezoelectric coefficient (d33 = 595 pC/N) and relatively low dielectric constant (εr = 1,603) were obtained in PZT/PVDF&CNTs composites, which generated an ultra-high d33×g33 of 24,942 × 10−15 m2/N. Therefore, the PZT/PVDF&CNTs piezoelectric composites achieve excellent energy harvesting performance (output voltage: 66 V, short current: 39.22 μA, and power density: 1.25 μW/mm2). Our strategy effectively boosts the performance of piezoelectric-polymer composites, which has certain guiding significance for design of energy harvesters.

References

[1]

Sezer N, Koç M. A comprehensive review on the state-of-the-art of piezoelectric energy harvesting. Nano Energy 2021;80:105567.

[2]

Hao YJ, Hou YD, Fu J, Yu XL, Gao X, Zheng Mu Peng, et al. Flexible piezoelectric energy harvester with an ultrahigh transduction coefficient by the interconnected skeleton design strategy. Nanoscale 2020;12(24):13001–9.

[3]

Yu ZH, Yang JK, Cao JW, Bian L, Li ZM, Yuan XT, et al. A PMNN-PZT piezoceramic based magneto-mechano-electric coupled energy harvester. Adv Funct Mater 2022;32(25):2111140.

[4]

Huan Y, Wei T, Wang ZX, Shen HT, Lin XJ, Huang SF, et al. Ultrahigh energy harvesting properties in Ag decorated potassium-sodium niobite particle-polymer composite. J Materiomics 2020;6(2):355–63.

[5]

Tu RW, Zhang BK, Sodano HA. Lead titanate nanowires/polyamide-imide piezoelectric nanocomposites for high-temperature energy harvesting. Nano Energy 2022;97:107175.

[6]

Yan MY, Zhong JW, Liu SW, Xiao ZD, Yuan X, Zhai D, et al. Flexible pillar-base structured piezocomposite with aligned porosity for piezoelectric energy harvesting. Nano Energy 2021;88:106278.

[7]

Yang ZB, Zhou SX, Zu J, Inman D. High-performance piezoelectric energy harvesters and their applications. Joule 2018;2(4):642–97.

[8]

Zhao HY, Hou YD, Yu XL, Zheng MP, Zhu MK. Giant high-temperature piezoelectricity in perovskite oxides for vibration energy harvesting. J Mater Chem A 2021;9(4):2284–91.

[9]

Shin DJ, Ji JH, Kim J, Jo GH, Jeong SJ, Koh JH. Enhanced flexible piezoelectric energy harvesters based on BaZrTiO3–BaCaTiO3 nanoparticles/PVDF composite films with cu floating electrodes. J Alloys Compd 2019;802:562–72.

[10]

Ye SB, Cheng C, Chen XM, Chen XL, Shao JY, Zhang J, et al. High-performance piezoelectric nanogenerator based on microstructured P(VDF-TrFE)/BNNTs composite for energy harvesting and radiation protection in space. Nano Energy 2019;60:701–14.

[11]

Fang KY, Fang F, Wang SW, Yang W, Sun W, Li JF. Hybridizing CNT/PMMA/PVDF towards high-performance piezoelectric nanofibers. J Phys D Appl Phys 2018;51(26):265305.

[12]

Priya S. Criterion for material selection in design of bulk piezoelectric energy harvesters. IEEE Trans Ultrason Ferroelectrics Freq Control 2010;57(12):2610–2.

[13]

Huan Y, Wang XJ, Yang WY, Hou LM, Zheng MP, Wei T, et al. Optimizing energy harvesting performance by tailoring ferroelectric/relaxor behavior in KNN-based piezoceramics. J Adv Ceram 2022;11:935–44.

[14]

Zhang Y, Xie MY, Roscow J, Bao YX, Zhou KC, Zhang D, et al. Enhanced pyroelectric and piezoelectric properties of PZT with aligned porosity for energy harvesting applications. J Mater Chem A 2017;5(14):6569–80.

[15]

Gao XY, Cheng ZX, Chen ZB, Liu Y, Meng XY, Zhang X, et al. The mechanism for the enhanced piezoelectricity in multi-elements doped (K,Na)NbO3 ceramics. Nat Commun 2021;12(1):881.

[16]

Yan XD, Zheng MP, Hou YD, Zhu MK. Composition-driven phase boundary and its energy harvesting performance of BCTZ lead–free piezoelectric ceramic. J Eur Ceram Soc 2017;37(7):2583–9.

[17]

Yan XD, Zheng MP, Zhu MK, Hou YD. A low frequency lead-free piezoelectric energy harvester with high-power density. J Am Ceram Soc 2019;102(6):3085–9.

[18]

Zheng MP, Hou YD, Zhu MK, Yan H. Nanodomains in metal/ferroelectric 0–3 type composites: on the origin of the strong piezoelectric effect. Scripta Mater 2018;145:19–22.

[19]

Zheng MP, Hou YD, Yan XD, Zhang LN, Zhu MK. A highly dense structure boosts energy harvesting and cycling reliabilities of a high-performance lead-free energy harvester. J Mater Chem C 2017;5(31):7862−7870.

[20]

Habib M, Zhou XF, Tang L, Xue GL, Akram F, Alzaid M, et al. Phase and domain engineering strategy for enhancement of piezoelectricity in the lead-free BiFeO3-BaTiO3 ceramics. J Materiomics 2023;9(5):920–9.

[21]

Wang XJ, Huan Y, Zhu YX, Zhang P, Yang WL, Li P, et al. Defect engineering of BCTZ-based piezoelectric ceramics with high piezoelectric properties. J Adv Ceram 2021;11(1):184–95.

[22]

Wang XJ, Huan Y, Ji SJ, Zhu YX, Wei T, Cheng ZX. Ultra-high piezoelectric performance by rational tuning of heterovalent-ion doping in lead-free piezoelectric ceramics. Nano Energy 2022;101:107580.

[23]

Xiao H, Dong W, Guo Y, Wang Y, Zhong H, Li Q, et al. Design for highly piezoelectric and visible/near-infrared photoresponsive perovskite oxides. Adv Mater 2019;31(4):1805802.

[24]

Yu XL, Hou YD, Zheng MP, Zhu MK. Stress engineering of perovskite ceramics for enhanced piezoelectricity and temperature stability toward energy harvesting. ACS Appl Electron Mater 2022;4(3):1359–66.

[25]

Wu JY, Zhang HB, Huang CH, Tseng CW, Meng N, Koval V, et al. Ultrahigh field-induced strain in lead-free ceramics. Nano Energy 2020;76:105037.

[26]

Batra K, Sinha N, Kumar B. Effect of Nd-doping on 0.95(K0.6Na0.4)NbO3-0.05(Bi0.5Na0.5)ZrO3 ceramics: enhanced electrical properties and piezoelectric energy harvesting capability. J Phys Chem Solid 2022;170:110953.

[27]

Liu H, Lin XJ, Zhang S, Huan Y, Huang SF, Cheng X. Enhanced performance of piezoelectric composite nanogenerator based on gradient porous PZT ceramic structure for energy harvesting. J Mater Chem A 2020;8(37):19631–40.

[28]

Zhang GZ, Zhao P, Zhang XS, Han K, Zhao T, Zhang Y, et al. Flexible three-dimensional interconnected piezoelectric ceramic foam based composites for highly efficient concurrent mechanical and thermal energy harvesting. Energy Environ Sci 2018;11(8):2046–56.

[29]

Panda S, Shin H, Hajra S, Oh Y, Oh W, Lee J, et al. Ferroelectric composite-based piezoelectric energy harvester for self-powered detection of obstructive sleep. J Materiomics 2023;9(4):609–17.

[30]

Fan HH, Jin CC, Wang Y, Hwang HL, Zhang YF. Structural of BCTZ nanowires and high performance BCTZ-based nanogenerator for biomechanical energy harvesting. Ceram Int 2017;43(8):5875−5880.

[31]

Zhang M, Gao T, Wang JS, Liao JJ, Qiu YQ, Xue H, et al. Single BaTiO3 nanowires-polymer fiber based nanogenerator. Nano Energy 2015;11:510–7.

[32]

Sun Y, Zheng YD, Wang R, Fan J, Liu Y. Direct-current piezoelectric nanogenerator based on two-layer zinc oxide nanorod arrays with equal c-axis orientation for energy harvesting. Chem Eng J 2021;426:131262.

[33]

Shi KM, Huang XY, Sun B, Wu ZY, He JL, Jiang PK. Cellulose/BaTiO3 aerogel paper based flexible piezoelectric nanogenerators and the electric coupling with triboelectricity. Nano Energy 2019;57:450–8.

[34]

Zhang YZ, Wu MJ, Zhu QY, Wang FY, Su HX, Li H, et al. Performance enhancement of flexible piezoelectric nanogenerator via doping and rational 3d structure design for self-powered mechanosensational system. Adv Funct Mater 2019;29(42):1904259.

[35]

Shao X, Dong DH, Parkinson G, Li CZ. Thin ceramic membrane with dendritic microchanneled sub structure and high oxygen permeation rate. J Membr Sci 2017;541:653–60.

[36]

Gao XY, Wu JG, Yu Y, Chu ZQ, Shi HD, Dong SX. Giant piezoelectric coefficients in relaxor piezoelectric ceramic PNN-PZT for vibration energy harvesting. Adv Funct Mater 2018;28(30):1706895.

[37]

Badatya S, Bharti DK, Sathish N, Srivastava AK, Gupta MK. Humidity sustainable hydrophobic poly(vinylidene fluoride)-carbon nanotubes foam based piezoelectric nanogenerator. ACS Appl Mater Interfaces 2021;13(23):27245–54.

[38]

Shao X, Dong DH, Parkinson G, Li CZ. Microstructure control of oxygen permeation membranes with templated microchannels. J Mater Chem A 2014;2(2):410–7.

[39]

Smolders CA, Reuvers AJ, Boom RM, Wienk IM. Microstructures in phase-inversion membranes. part 1. formation of macrovoids. J Membr Sci 1992;73:259–75.

[40]

Frommer MA, Messalem RM. Mechanism of membrane formation. Vi. Convective flows and large void formation during membrane precipitation. Ind Eng Chem Prod Res Dev 1973;12(4):328–33.

[41]

Li X, Wang XM, Weng L, Yu Y, Zhang XR, Liu LZ, et al. Dielectrical properties of graphite nanosheets/PVDF composites regulated by coupling agent. Mater Today Commun 2019;21:100705.

[42]

Wang Z, Xue WQ, Yang YZ, Li YC, Wang SS, Zhan YH, et al. PMMA brush-modified graphene for flexible energy storage PVDF dielectric films. Compos Commun 2023;37:101411.

[43]

Wang T, Hu JC, Yang HB, Jin L, Wei XY, Li CC, et al. Dielectric relaxation and maxwell-wagner interface polarization in Nb2O5 doped 0.65BiFeO3–0.35BaTiO3 ceramics. J Appl Phys 2017;121(8):084103.

[44]

Shoorangiz M, Sherafat Z, Bagherzadeh E. CNT loaded PVDF-KNN nanocomposite films with enhanced piezoelectric properties. Ceram Int 2022;48(11):15180–8.

[45]

Li Z, Thong HC, Zhang YF, Xu Z, Zhou Z, Liu YX, et al. Defect engineering in lead zirconate titanate ferroelectric ceramic for enhanced electromechanical transducer efficiency. Adv Funct Mater 2021;31(1):2005012.

[46]

Randall CA, Kim N, Kucera JP, Cao WW, Shrout TR. Intrinsic and extrinsic size effects in fine-grained morphotropic-phase-boundary lead zirconate titanate ceramics. J Am Ceram Soc 1998;81(3):677–88.

[47]

Bedekar V, oliver J, Priya S. Design and fabrication of bimorph transducer for optimal vibration energy harvesting. IEEE Trans Ultrason Ferroelectrics Freq Control 2010;57(7):1513–23.

[48]

Xu TT, Wang CA, Feteira A. Piezoelectric properties of a pioneering 3-1 type PZT/epoxy composites based on freeze-casting processing. J Am Ceram Soc 2014;97(5):1511–6.

[49]

Yi SL, Zhang WK, Gao GP, Xu HC, Xu DY. Structural design and properties of fine scale 2-2-2 PZT/epoxy piezoelectric composites for high frequency application. Ceram Int 2018;44(9):10940–4.

[50]

Goh PC, Yao K, Chen Z. Lead-free piezoelectric (K0.5Na0.5)NbO3 thin films derived from chemical solution modified with stabilizing agents. Appl Phys Lett 2010;97(10):102901.

[51]

Zhao QL, He GP, Di JJ, Song WL, Hou ZL, Tan PP, et al. Flexible semitransparent energy harvester with high pressure sensitivity and power density based on laterally aligned PZT single-crystal nanowires. ACS Appl Mater Interfaces 2017;9(29):24696–703.

[52]

Huang SF, Li X, Liu FT, Chang J, Xu DY, Cheng X. Effect of carbon black on properties of 0–3 piezoelectric ceramic/cement composites. Curr Appl Phys 2009;9(6):1191–4.

[53]

Huan Y, Zhang XS, Song JN, Zhao Y, Wei T, Zhang GG, et al. High-performance piezoelectric composite nanogenerator based on Ag/(K,Na)NbO3 heterostructure. Nano Energy 2018;50:62–9.

[54]

Kripotou S, Sovatzoglou S, Pandis C, Kuliček J, Mičušík M, Omastova M, et al. Effects of CNT inclusions on structure and dielectric properties of PVDF/CNT nanocomposites. Phase Transitions 2016;89(7–8):717–30.

[55]

Qi FW, Chen N, Wang Q. Dielectric and piezoelectric properties in selective laser sintered polyamide11/BaTiO3/CNT ternary nanocomposites. Mater Des 2018;143:72–80.

[56]

Baek C, Yun JH, Wang JE, Jeong CK, Lee KJ, Park KI, et al. Flexible energy harvester based on a lead-free and piezoelectric BCTZ nanoparticle-polymer composite. Nanoscale 2016;8(40):17632–8.

[57]

Zhou Z, Tang HX, Sodano HA. Scalable synthesis of morphotropic phase boundary lead zirconium titanate nanowires for energy harvesting. Adv Mater 2014;26(45):7547−7554.

[58]

Gao X, Zheng MP, Yan XD, Zhu MK, Hou YD. Ultrahigh current density and fatigue stability in flexible energy harvester by designing delivery paths. Mater Today Phys 2021;19:100424.

[59]

Yan YK, Marin A, Zhou Y, Priya S. Enhanced vibration energy harvesting through multilayer textured Pb(Mg1/3Nb2/3)O3–PbZrO3–PbTiO3 piezoelectric ceramics. Energy Harvesting and Systems 2014;1(3–4):189–95.

[60]

Yue YG, Hou YD, Zheng MP, Yan XD, Zhu MK. Submicron crystalline buildup and size-dependent energy harvesting characteristic in PZN–PZT ternary ferroelectrics. J Am Ceram Soc 2017;100(11):5211–9.

Journal of Materiomics
Pages 1063-1070
Cite this article:
Hou L, Huan Y, Zheng M, et al. 3D vertically aligned microchannel structure to enhance piezoelectric energy harvesting performance of PZT/PVDF&CNTs piezoelectric composites. Journal of Materiomics, 2024, 10(5): 1063-1070. https://doi.org/10.1016/j.jmat.2023.11.006

95

Views

2

Crossref

3

Web of Science

5

Scopus

Altmetrics

Received: 09 August 2023
Revised: 29 October 2023
Accepted: 02 November 2023
Published: 30 November 2023
© 2023 The Author(s).

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Return