Material embrittlement in high strain-rate loading

Cottrell A H 1953 Dislocations and Plastic Flow in Crystals (Oxford: Clarendon Press)

Koyama M, Shimomura Y, Chiba A, Akiyama E and Tsuzaki K 2017 Room-temperature blue brittleness of Fe-Mn-C austenitic steels Scr. Mater. 141 20–3

Stepanov N, Tikhonovsky M, Yurchenko N, Zyabkin D, Klimova M, Zherebtsov S, Efimov A and Salishchev G 2015 Effect of cryo-deformation on structure and properties of CoCrFeNiMn high-entropy alloy Intermetallics 59 8–17

Darnbrough J, Roebuck B and Flewitt P 2015 The influence of temperature and grain boundary volume on the resistivity of nanocrystalline nickel J. Appl. Phys. 118 184302

Xing X, Yu M, Chen W and Zhang H 2017 Atomistic simulation of hydrogen-assisted ductile-to-brittle transition in α-iron Comput. Mater. Sci. 127 211–21

Toyama T, Nagai Y, Tang Z, Hasegawa M, Almazouzi A, van Walle E and Gerard R 2007 Nanostructural evolution in surveillance test specimens of a commercial nuclear reactor pressure vessel studied by three-dimensional atom probe and positron annihilation Acta Mater. 55 6852–60

Pons D and Bourgoin J 1985 Irradiation-induced defects in GaAs J. Phys. C: Solid State Phys. 18 3839

Kameda J and Bevolo A 1989 Neutron irradiation-induced intergranular solute segregation in iron base alloys Acta Metall. 37 3283–96

Chilton A and Wronski A 1969 The effects of strain rate and pressurization on the ductile-brittle transition temperature of polycrystalline sintered tungsten J. Less-Common Met. 17 447–50

Wang B, Liu Z, Su G, Song Q and Ai X 2015 Investigations of critical cutting speed and ductile-to-brittle transition mechanism for workpiece material in ultra-high speed machining Int. J. Mech. Sci. 104 44–59

Hocheng H and Tai N H 2000 Assessment of ultrasonic drilling of C/SiC composite material Composites A 31 133–42

Tawakoli T and Azarhoushang B 2008 Influence of ultrasonic vibrations on dry grinding of soft steel Int. J. Mach. Tools Manuf. 48 1585–91

Iqbal M A, Gupta G, Dikawar A and Gupta N K 2010 Effect of projectile nose shape on the ballistic resistance of ductile targets Eur. J. Mech. A 29 683–94

Klavzar A, Pursche F, Herzig N and Wolf T 2017 Ballistic limit thickness and failure of steel targets with different strengths under EFP impact Proc. Eng. 197 270–7

Hiroe T, Fujiwara K, Hata H and Takahashi H 2008 Deformation and fragmentation behaviour of exploded metal cylinders and the effects of wall materials, configuration, explosive energy and initiated locations Int. J. Impact Eng. 35 1578–86

Shapoval A, Mos'pan D and Dragobetskii V 2016 Ensuring high performance characteristics for explosion-welded bimetals Metallurgist 60 313–7

Choi S J, Lee K H and Gudmestad O T 2015 The effect of dynamic amplification due to a structures vibration on breaking wave impact Ocean Eng. 96 8–20

Zhang A, Chen S, Wei H and Zhang X 2010 Discussion of strain rate of building structure under blasting vibration response Blasting 27 9–12

Chung L, Reinhorn A and Soong T 1988 Experiments on active control of seismic structures J. Eng. Mech. 114 241–56

Gates W E and Morden M 1996 Professional structural engineering experience related to welded steel moment frames following the Northridge earthquake Struct. Des. Tall Build. 5 29–44

Gertsch R, Gertsch L and Rostami J 2007 Disc cutting tests in Colorado Red Granite: implications for TBM performance prediction Int. J. Rock Mech. Min. Sci. 44 238–46

Balci C 2009 Correlation of rock cutting tests with field performance of a TBM in a highly fractured rock formation: a case study in Kozyatagi-Kadikoy metro tunnel, Turkey Tunnelling Underground Space Technol. 24 423–35

Gao S, Kang R, Dong Z and Zhang B 2013 Edge chipping of silicon wafers in diamond grinding Int. J. Mach. Tools Manuf. 64 31–7

Molinari A, Soldani X and Miguélez M 2013 Adiabatic shear banding and scaling laws in chip formation with application to cutting of Ti-6Al-4V J. Mech. Phys. Solids 61 2331–59

Lorentzon J, Järvstråt N and Josefson B 2009 Modelling chip formation of alloy 718 J. Mater. Process. Technol. 209 4645–53

Wang B, Liu Z and Yang Q 2013 Investigations of yield stress, fracture toughness, and energy distribution in high speed orthogonal cutting Int. J. Mach. Tools Manuf. 73 1–8

Schulz H, Abele E and Sahm A 2001 Material aspects of chip formation in HSC machining CIRP Ann. 50 45–8

Sutter G and List G 2013 Very high speed cutting of Ti-6Al-4V titanium alloy-change in morphology and mechanism of chip formation Int. J. Mach. Tools Manuf. 66 37–43

Zhang B and Howes T D 1995 Subsurface evaluation of ground ceramics CIRP Ann. 44 263–6

Zhou L, Shimizu J, Muroya A and Eda H 2003 Material removal mechanism beyond plastic wave propagation rate Precis. Eng. 27 109–16

Masuda K, Mizutani H and Yamada I 1987 Experimental study of strain-rate dependence and pressure dependence of failure properties of granite J. Phys. Earth 35 37–66

Zhang Q B and Zhao J 2014 A review of dynamic experimental techniques and mechanical behaviour of rock materials Rock Mech. Rock Eng. 47 1411–78

Frew D J, Forrestal M J and Chen W 2002 Pulse shaping techniques for testing brittle materials with a split hopkinson pressure bar Exp. Mech. 42 93–106

Liu W D, Liu K X and Xia X X 2010 The failure stress of bulk metallic glasses under very high strain-rate J. Mater. Res. 25 1230–4

Liu W D and Liu K X 2010 Mechanical behavior of a Zr-based metallic glass at elevated temperature under high strain-rate J. Appl. Phys. 108 033511

Meyers M, Xu Y, Xue Q, Pérez-Prado M T and McNelley T R 2003 Microstructural evolution in adiabatic shear localization in stainless steel Acta Mater. 51 1307–25

Wang B and Liu Z 2016 Investigations on deformation and fracture behavior of workpiece material during high speed machining of 7050-T7451 aluminum alloy CIRP J. Manuf. Sci. Technol. 14 43–54

Wang B and Liu Z 2014 Investigations on the chip formation mechanism and shear localization sensitivity of high-speed machining Ti-6Al-4V Int. J. Adv. Manuf. Technol. 75 1065–76

Tian L, Fu Y, Xu J, Li H and Ding W 2015 The influence of speed on material removal mechanism in high speed grinding with single grit Int. J. Mach. Tools Manuf. 89 192–201

Clifton R J and Klopp R W 1985 Pressure-shear plate impact testing Met. Handbook 8 230–9

Nicholas T 1981 Tensile testing of materials at high rates of strain Exp. Mech. 21 177–85

Frew D J, Akers S A, Chen W and Green M L 2010 Development of a dynamic triaxial Kolsky bar Meas. Sci. Technol. 21 105704

Xue Q, Meyers M and Nesterenko V 2002 Self-organization of shear bands in titanium and Ti-6Al-4V alloy Acta Mater. 50 575–96

Poulachon G, Moisan A L and Jawahir I 2007 Evaluation of chip morphology in hard turning using constitutive models and material property data J. Manuf. Sci. Eng. 129 41–7

Recht R F 1978 Taylor ballistic impact modelling applied to deformation and mass loss determinations Int. J. Eng. Sci. 16 809–27

Mondal C, Mishra B, Jena P K, Kumar K S and Bhat T B 2011 Effect of heat treatment on the behavior of an AA7055 aluminum alloy during ballistic impact Int. J. Impact Eng. 38 745–54

Johnson G R 1983 A constitutive model and data for materials subjected to large strains, high strain-rates, and high temperatures Proc. 7th Inf. Symp. Ballistics pp 541–7

Calamaz M, Coupard D and Girot F 2008 A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V Int. J. Mach. Tools Manuf. 48 275–88

Pan Z, Shih D S, Tavei A, Garmestani H and Liang S Y 2017 Modeling of Ti-6Al-4V machining force considering material microstructure evolution Int. J. Adv. Manuf. Technol. 91 2673–80

Rule W K and Jones S 1998 A revised form for the Johnson–Cook strength model Int. J. Impact Eng. 21 609–24

Wang X, Huang C, Zou B, Liu H, Zhu H and Wang J 2013 Dynamic behavior and a modified Johnson–Cook constitutive model of Inconel 718 at high strain-rate and elevated temperature Mater. Sci. Eng. A 580 385–90

Lin Y, Chen X M and Liu G 2010 A modified Johnson–Cook model for tensile behaviors of typical high-strength alloy steel Mater. Sci. Eng. A 527 6980–6

Holmquist T J and Johnson G R 2011 A computational constitutive model for glass subjected to large strains, high strain-rates and high pressures J. Appl. Mech. 78 051003

Johnson G R and Holmquist T J 1994 An improved computational constitutive model for brittle materials AIP Conf. Proc. 309 981–4

Follansbee P and Kocks U 1988 A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable Acta Metall. 36 81–93

Meyers M A, Benson D J, Vöhringer O, Kad B K, Xue Q and Fu H-H 2002 Constitutive description of dynamic deformation: physically-based mechanisms Mater. Sci. Eng. A 322 194–216

MF A 1975 Thermodynamics and kinetics of slip Prog. Mater. Sci. 19 1–281

Zerilli F J and Armstrong R W 1987 Dislocation-mechanics-based constitutive relations for material dynamics calculations J. Appl. Phys. 61 1816–25

Mecking H and Kocks U 1981 Kinetics of flow and strain-hardening Acta Metall. 29 1865–75

Steinberg D and Lund C 1989 A constitutive model for strain rates from 10⁻⁴ to 10⁶ s⁻¹ J. Appl. Phys. 65 1528–33

Wedberg D and Lindgren L E 2015 Modelling flow stress of AISI 316L at high strain-rates Mech. Mater. 91 194–207

Gao C and Zhang L 2012 Constitutive modelling of plasticity of fcc metals under extremely high strain-rates Int. J. Plast. 32 121–33

Galligan J M, McKrell T J and Robson M T 2000 Dislocation drag processes Mater. Sci. Eng. A 287 259–64

Tang Y 2018 Uncovering the inertia of dislocation motion and negative mechanical response in crystals Sci. Rep. 8 140

Regazzoni G, Kocks U F and Follansbee P S 1987 Dislocation kinetics at high strain-rates Acta Metall. 35 2865–75

Mao Z N, An X H, Liao X Z and Wang J T 2018 Opposite grain size dependence of strain rate sensitivity of copper at low vs high strain-rates Mater. Sci. Eng. A 738 430–8

Wang Q and Liu Z 2018 Microhardness prediction based on a microstructure-sensitive flow stress model during high speed machining Ti-6Al-4V J. Manuf. Sci. Eng. 140 091003

Outeiro J, Umbrello D and M’saoubi R 2006 Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel Int. J. Mach. Tools Manuf. 46 1786–94

Johnson G R, Hoegfeldt J, Lindholm U and Nagy A 1983 Response of various metals to large torsional strains over a large range of strain rates-Part 1: ductile metals J. Eng. Mater. Technol. 105 42–7

Chiem C and Duffy J 1983 Strain rate history effects and observations of dislocation substructure in aluminum single crystals following dynamic deformation Mater. Sci. Eng. 57 233–47

Bleck W and Schael I 2000 Determination of crash-relevant material parameters by dynamic tensile tests Steel Res. 71 173–8

Grässel O, Krüger L, Frommeyer G and Meyer L 2000 High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development-properties-application Int. J. Plast. 16 1391–409

Boyce B L and Dilmore M F 2009 The dynamic tensile behavior of tough, ultrahigh-strength steels at strain-rates from 0.0002 s⁻¹ to 200 s⁻¹ Int. J. Impact Eng. 36 263–71

Kim J H, Kim D, Han H N and Barlat F 2013 Strain rate dependent tensile behavior of advanced high strength steels: Experiment and constitutive modeling Mater. Sci. Eng. A 559 222–31

Bhat H S, Rosakis A J and Sammis C G 2012 A micromechanics based constitutive model for brittle failure at high strain-rates J. Appl. Mech. 79 031016

Rosakis A J and Zehnder A T 1985 On the dynamic fracture of structural metals Int. J. Fract. 27 169–86

Deng X and Rosakis A J 1991 Dynamic crack propagation in elastic-perfectly plastic solids under plane stress conditions J. Mech. Phys. Solids 39 683–722

Li X, Li H, Zhang Q B, Liang J L and Zhao J 2018 Dynamic fragmentation of rock material: Characteristic size, fragment distribution and pulverization law Eng. Fract. Mech. 199 739–59

Zakir S M, Zhen W, Tao S, Yulong L, Fenghua Z, Sohail A and Dar U A 2018 High rate response and dynamic failure of aluminosilicate glass under compression loading Proc. Struct. Integrity 13 1244–9

Grady D and Kipp M 1985 Mechanisms of dynamic fragmentation: factors governing fragment size Mech. Mater. 4 311–20

Clifton R J 2000 Response of materials under dynamic loading Int. J. Solids Struct. 37 105–13

Nieh T G and Wadsworth J 2006 Homogeneous deformation of bulk metallic glasses Scr. Mater. 54 387–92

Lu J, Ravichandran G and Johnson W L 2003 Deformation behavior of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass over a wide range of strain-rates and temperatures Acta Mater. 51 3429–43

Yu H B, Shen X, Wang Z, Gu L, Wang W H and Bai H Y 2012 Tensile plasticity in metallic glasses with pronounced β relaxations Phys. Rev. Lett. 108 015504

Turley D M, Doyle E D and Ramalingam S 1982 Calculation of shear strains in chip formation in titanium Mater. Sci. Eng. 55 45–8

Shaw M C and Cookson J 2005 Metal Cutting Principles (New York: Oxford University Press)

Wright T W and Ockendon H 1996 A scaling law for the effect of inertia on the formation of adiabatic shear bands Int. J. Plast. 12 927–34

Wang B, Liu Z, Song Q, Wan Y and Shi Z 2016 Proper selection of cutting parameters and cutting tool angle to lower the specific cutting energy during high speed machining of 7050-T7451 aluminum alloy J. Clean. Prod. 129 292–304

Ma W, Chen X and Shuang F 2017 The chip-flow behaviors and formation mechanisms in the orthogonal cutting process of Ti-6Al-4V alloy J. Mech. Phys. Solids 98 245–70

Ye G, Xue S, Ma W and Dai L 2017 Onset and evolution of discontinuously segmented chip flow in ultra-high-speed cutting Ti-6Al-4V Int. J. Adv. Manuf. Technol. 88 1161–74

Zhao D, Sangesland S and Vedvik N 2016 An experimental study of axial vibration assisted drilling J. Nat. Gas Sci. Eng. 35 1158–66

Lv D, Huang Y, Wang H, Tang Y and Wu X 2013 Improvement effects of vibration on cutting force in rotary ultrasonic machining of BK7 glass J. Mater. Process. Technol. 213 1548–57

Wang J, Zhang C, Feng P and Zhang J 2016 A model for prediction of subsurface damage in rotary ultrasonic face milling of optical K9 glass Int. J. Adv. Manuf. Technol. 83 347–55

Kahraman S 2002 Correlation of TBM and drilling machine performances with rock brittleness Eng. Geol. 65 269–83

Gong Q M and Zhao J 2007 Influence of rock brittleness on TBM penetration rate in Singapore granite Tunnelling Underground Space Technol. 22 317–24

Wu W R, Lou L and Liang X J 2017 Cutting features of damage rock by shock disturbance J. Cent. South Univ. (Sci. Technol.) 48 2709–14

Zhang Y Q, Lu Y and Hao H 2004 Analysis of fragment size and ejection velocity at high strain-rate Int. J. Mech. Sci. 46 27–34

Kipp M and Grady D 1985 Dynamic fracture growth and interaction in one dimension J. Mech. Phys. Solids 33 399–415

Zhang W, Zhang Y and Zhang G 2011 Single and multiple dynamic impacts behaviour of ultra-high performance cementitious composite J. Wuhan Univ. Technol.—Mater. Sci. Ed. 26 1227–34

Von Karman T and Duwez P 1950 The propagation of plastic deformation in solids J. Appl. Phys. 21 987–94

Wang L 2011 Foundations of Stress Waves (Amsterdam: Elsevier)

Jiang F, Li Z M, Wang N C, Guo H and Xu X P 2016 Research on dynamic characteristics of Shanxi black granite under high strain-rates J. Vib. Shock 35 177–82

Huang S, Xia K and Zheng H 2013 Observation of microscopic damage accumulation in brittle solids subjected to dynamic compressive loading Rev. Sci. Instrum. 84 093903

Liu J, Fan Q, Cai H and Wang F 2015 Underlying mechanism of periodical adiabatic shear bands generated in Ti-6Al-4V target by projectile impact Mater. Des. 87 231–7

Zheng C et al 2015 Failure mechanisms in ballistic performance of Ti-6Al-4V targets having equiaxed and lamellar microstructures Int. J. Impact Eng. 85 161–9

Rice J R and Thomson R 1974 Ductile versus brittle behaviour of crystals Phil. Mag.: J. Theor. Exp. Appl. Phys. 29 73–97

Wang B, Liu Z, Su G and Ai X 2015 Brittle removal mechanism of ductile materials with ultrahigh-speed machining J. Manuf. Sci. Eng. 137 061002

Lawn B and Wilshaw T R 1993 Fracture of Brittle Solids (Cambridge: Cambridge University Press)

Armstrong R and Walley S 2008 High strain-rate properties of metals and alloys Int. Mater. Rev. 53 105–28

Mahalingam S, Flewitt P and Knott J 2013 The ductile-brittle transition for nominally pure polycrystalline nickel Mater. Sci. Eng. A 564 342–50

Griffith A A 1921 The phenomena of rupture and flow in solids Phil. Trans. R. Soc. A 221 163–98

Orowan E 1949 Fracture and strength of solids Rep. Prog. Phys. 12 185

Stroh A 1954 The formation of cracks as a result of plastic flow Proc. R. Soc. A 223 404–14

Cottrell A H 1958 Theory of brittle fracture in steel and similar metals Trans. Met. Soc. AIME 212

Li H, Fan C, Tao K, Choo H and Liaw P K 2006 Compressive behavior of a Zr-based metallic glass at cryogenic temperatures Adv. Mater. 18 752–4

Qiao J C, Wang Q and Pelletier J M 2019 Structural heterogeneities and mechanical behavior of amorphous alloys Prog. Mater. Sci. 104 250–329

Donovan P E and Stobbs W M 1981 The structure of shear bands in metallic glasses Acta Metall. 29 1419–36

Argon A S 1979 Plastic deformation in metallic glasses Acta Metall. 27 47–58

Chen H, He Y, Shiflet G J and Poon S J 1994 Deformation-induced nanocrystal formation in shear bands of amorphous alloys Nature 367 541–3

Zhang B and Yin J 2019 The ’skin effect' of subsurface damage distribution in materials subjected to high-speed machining Int. J. Extreme Manuf. 1 012007

Jones R E 1973 Fatigue crack growth retardation after single-cycle peak overload in Ti-6Al-4V titanium alloy Eng. Fract. Mech. 5 585–604

Krishnan K, Sockalingam S, Bansal S and Rajan S D 2010 Numerical simulation of ceramic composite armor subjected to ballistic impact Composites B 41 583–93

Crouch I G, Kesharaju M and Nagarajah R 2015 Characterisation, significance and detection of manufacturing defects in reaction sintered silicon carbide armour materials Ceram. Int. 41 11581–91