PDF (1.9 MB)
Collect
Submit Manuscript
Show Outline
Outline
Abstract
Keywords
References
Show full outline
Hide outline
Publishing Language: Chinese | Open Access

The Progress of Research on High-Entropy Ceramics in The Field of Tribology

Xu-Dong NIEJin-Yong XUZi-Cong ZHANGXin-Long WEIJin-Kun XIAOChao ZHANG()
School of Mechanical Engineering, Yangzhou University, Yangzhou 225000 China
Show Author Information

Abstract

high-entropy ceramics are a promising class of compounds made up of non-metallic elements and a variety of metallic elements with equal or nearly equal molar ratios, which have higher hardness, better oxidation and wear resistance than conventional ceramics, not only enriches the system of ceramic materials, but also has broad application prospects in the fields of thermal barriers, thermoelectricity and wear and corrosion resistance. A variety of wear-resistant high-entropy ceramics with good phase stability and mechanical properties have been developed in recent years. However the research on the lubrication mode of such materials in dry friction and high temperature friction conditions is distressed, which restricts its further development in the field of friction and lubrication. This paper aims to address this gap by discussing the intrinsic properties and preparation process of high-entropy ceramics, and focuses on the research progress of high-entropy ceramics in the field of tribology in recent years. It highlights the tribological properties of high-entropy oxides, high-entropy carbides, high-entropy nitrides and high-entropy borides from the perspectives of crystal structure and mechanical properties in succession, and discusses the potential lubrication methods of high-entropy ceramics, including the addition of solid lubricants and modulating components to achieve self-lubrication. This paper not only reviews the lubrication methods that have achieved applications in the field of high-entropy ceramics, but also summarizes some of the potential high-entropy ceramic solid lubricants with lubrication effects that have been demonstrated in the field of traditional ceramics. The appropriate lubrication can generate a friction-reducing film on the sliding surface to lower the contact stress and effectively alleviate the deterioration of friction performance under high-temperature and dry friction conditions, which are often caused by the intrinsic brittleness of ceramics and the ultimate aim is to reduce the wear rate of the material in a wide temperature range.

CLC number: TQ174 Document code: A Article ID: 1005-1198(2025)01-0001-23

References

[1]

XIANG H, XING Y, DAI FZ, et al. High-entropy ceramics: Present status, challenges, and a look forward[J]. Journal of Advanced Ceramics, 2021, 10(3): 385-441.

[2]

YEH JW., CHEN SK., LIN SJ., et al. Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes[J]. Advanced Engineering Materials, 2004, 6(5): 299-303.

[3]

WANG Y. Processing and properties of high entropy carbides[J]. Advances in Applied Ceramics, 2022, 121(2): 57-78.

[4]

ROST C M, SACHET E, BORMAN T, et al. Entropy-stabilized oxides[J]. Nature Communications, 2015, 6(1): 8485.

[5]

MOSKOVSKIKH D, VOROTILO S, BUINEVICH V, et al. Extremely hard and tough high entropy nitride ceramics[J]. Scientific Reports, 2020, 10(1): 19874.

[6]

YU D, YIN J, ZHANG B, et al. Recent development of high-entropy transitional carbides: a review[J]. Journal of the Ceramic Society of Japan, 2020, 128(7): 329-335.

[7]

XIE HX,XIANG HZ,MA QR, et al. Research progress of high-entropy ceramic materials[J]. Materials Reports, 2022, 36(06): 61-68.

[8]

ZHOU L, LIU J X, TU T Z, et al. Fast grain growth phenomenon in high-entropy ceramics: A case study in rare-earth hexaaluminates[J]. Journal of Advanced Ceramics, 2023, 12(1): 111-121.

[9]

XIONG Y, LIU C. Application of discharge plasma sintering technology in the preparation of ceramic materials[J]. Advanced Ceramics,2016,37(04):227-240.

[10]

YE B, WEN T, LIU D, et al. Oxidation behavior of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics at 1073-1473 K in air[J]. Corrosion Science, 2019, 153: 327-332.

[11]

YE B, WEN T, CHU Y. High-temperature oxidation behavior of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics in air[J]. Journal of the American Ceramic Society, 2020, 103(1): 500-507.

[12]

WANG K, MA B, LI T, et al. Fabrication of high-entropy perovskite oxide by reactive flash sintering[J]. Ceramics International, 2020, 46(11): 18358-18361.

[13]

WANG H,TAN K,CUI K, et al. Current status of research on the preparation of advanced ceramic powders by wet chemical method[J]. Advanced Ceramics,2023,44(04):303-315.

[14]

WANG Q, SARKAR A, LI Z, et al. High entropy oxides as anode material for Li-ion battery applications: A practical approach[J]. Electrochemistry Communications, 2019, 100: 121-125.

[15]

CHELLALI M R, SARKAR A, NANDAM S H, et al. On the homogeneity of high entropy oxides: An investigation at the atomic scale[J]. Scripta Materialia, 2019, 166: 58-63.

[16]

CHENG W, JI L, ZHANG L, et al. Refractory high-entropy alloys fabricated using laser technologies: a concrete review[J]. Journal of Materials Research and Technology, 2023, 24: 7497-7524.

[17]

BIESUZ M, SAUNDERS T G, VEVERKA J, et al. Solidification microstructures of multielement carbides in the high entropy ZrNbHfTaCx system produced by arc melting[J]. Scripta Materialia, 2021, 203: 114091.

[18]

ZHOU C, LUO Z, DU T, et al. Directionally solidified high-entropy (Y0.2Gd0.2Ho0.2Er0.2Yb0.2)3Al5O12/Al2O3 eutectic with outstanding crystallographic texture formation capability[J]. Scripta Materialia, 2022, 220: 114939.

[19]

ZHAO Y, CHEN S, CHEN Y, et al. Super-hard and anti-corrosion (AlCrMoSiTi)Nx high entropy nitride coatings by multi-arc cathodic vacuum magnetic filtration deposition[J]. Vacuum, 2022, 195: 110685.

[20]

GORBAN’ V F, ANDREEV A A, CHIKRYZHOV A M, et al. Formation and Physicochemical Properties of High Entropy Oxide Based on Equiatomic Alloy CrFeCoNiMn[J]. Journal of Superhard Materials, 2019, 41(1): 38-42.

[21]

LU X, ZHANG C, WANG C, et al. Investigation of (CrAlTiNbV)Nx high-entropy nitride coatings via tailoring nitrogen flow rate for anti-wear applications in aviation lubricant[J]. Applied Surface Science, 2021, 557: 149813.

[22]

LI R, LI M, JIANG C, et al. Thermal stability of AlCrTaTiZrMo-nitride high entropy film as a diffusion barrier for Cu metallization[J]. Journal of Alloys and Compounds, 2019, 773: 482-489.

[23]

BACHANI S K, WANG C J, LOU B S, et al. Fabrication of TiZrNbTaFeN high-entropy alloys coatings by HiPIMS: Effect of nitrogen flow rate on the microstructural development, mechanical and tribological performance, electrical properties and corrosion characteristics[J]. Journal of Alloys and Compounds, 2021, 873: 159605.

[24]

LV ZH, GU HZ, YANG S. Research progress of high entropy ceramics at home and abroad[J]. Refractory and Lime,2022,47(01):5-10.

[25]
HUI, JJ. Preparation of high-entropy oxide MgCoNiCuZnO5 composite ceramics and its wide temperature domain tribological behavior [D]. Shaanxi: Shaanxi University of Science and Technology Ph.D. thesis,2024.
[26]

FRACCHIA M, CODURI M, GHIGNA P, et al. Phase stability of high entropy oxides: A critical review[J]. Journal of the European Ceramic Society, 2024, 44(2): 585-594.

[27]

ARSHAD J, JANJUA N K, RAZA R. Synthesis of Novel (Be,Mg,Ca,Sr,Zn,Ni)3O4 High Entropy Oxide with Characterization of Structural and Functional Properties and Electrochemical Applications[J]. Journal of Electrochemical Science and Technology, 2021, 12(1): 112-125.

[28]

CHEN K, PEI X, TANG L, et al. A five-component entropy-stabilized fluorite oxide[J]. Journal of the European Ceramic Society, 2018, 38(11): 4161-4164.

[29]

JIANG Z, ZHANG R, ZHAO H, et al. Preparation of (Ga0.2Cr0.2Mn0.2Ni0.2Zn0.2)3O4 high-entropy oxide with narrow bandgap for photocatalytic CO2 reduction with water vapor[J]. Applied Surface Science, 2023, 612: 155809.

[30]

LI X, MA J, CHEN K, et al. Design and investigate the electrical properties of Pb(Mg0.2Zn0.2Nb0.2Ta0.2W0.2)O3–PbTiO3 high-entropy ferroelectric ceramics[J]. Ceramics International, 2022, 48(9): 12848-12855.

[31]

LILIN L, BIN L, WEIWEI S, et al. Thermophysical properties of (La0.25Sm0.25Gd0.25Yb0.25)2Ce2+xO7+2x(x=0.1, 0.2, and 0.3) high entropy oxides[J]. Ceramics International, 2022, 48(11): 14980-14986.

[32]

TENG Z, ZHU L, TAN Y, et al. Synthesis and structures of high-entropy pyrochlore oxides[J]. Journal of the European Ceramic Society, 2020, 40(4): 1639-1643.

[33]

HONG W, CHEN F, SHEN Q, et al. Microstructural evolution and mechanical properties of (Mg,Co,Ni,Cu,Zn)O high-entropy ceramics[J]. Journal of the American Ceramic Society, 2019, 102(4): 2228-2237.

[34]
LI C. Preparation and tribological properties of (MgCoNiCuZn)O high-entropy ceramics [D]. Shaanxi: Shaanxi University of Science and Technology, Master's thesis, 2023.
[35]

HUI JJ,JIA JH,BAI GY,et al. Preparation and properties of (MgCoNiCuZn)O high-entropy oxide ceramic coatings[J]. Mechanical Materials for Mechanical,2023,47(05):41-46+54.

[36]

GILD J, SAMIEE M, BRAUN J L, et al. High-entropy fluorite oxides[J]. Journal of the European Ceramic Society, 2018, 38(10): 3578-3584.

[37]

WRIGHT A J, WANG Q, HUANG C, et al. From high-entropy ceramics to compositionally-complex ceramics: A case study of fluorite oxides[J]. Journal of the European Ceramic Society, 2020, 40(5): 2120-2129.

[38]

REN B,LIU YF,MENG ZX, et al. Preparation and electrical properties of non-isomolar ratio Sr(Ti,Zr,Y,Sn,Hf)O3-σ high-entropy chalcogenide oxides[J]. Advanced Ceramics,2023,44(Z1):497-508.

[39]

BRAIC M, BRAIC V, BALACEANU M, et al. Characteristics of (TiAlCrNbY)C films deposited by reactive magnetron sputtering[J]. Surface and Coatings Technology, 2010, 204(12-13): 2010-2014.

[40]

BRAIC V, BALACEANU M, BRAIC M, et al. Characterization of multi-principal-element (TiZrNbHfTa)N and (TiZrNbHfTa)C coatings for biomedical applications[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2012, 10: 197-205.

[41]

BRAIC M, BALACEANU M, VLADESCU A, et al. Deposition and characterization of multi-principalelement (CuSiTiYZr)C coatings[J]. Applied Surface Science, 2013, 284: 671-678.

[42]

BRAIC V, PARAU A C, PANA I, et al. Effects of substrate temperature and carbon content on the structure and properties of (CrCuNbTiY)C multicomponent coatings[J]. Surface and Coatings Technology, 2014, 258: 996-1005.

[43]

DUSZA J, CSANÁDI T, MEDVEĎ D, et al. Nanoindentation and tribology of a (Hf-Ta-Zr-Nb-Ti)C highentropy carbide[J]. Journal of the European Ceramic Society, 2021, 41(11): 5417-5426.

[44]

ZHANG Y, GUO W M, JIANG Z B, et al. Dense high-entropy boride ceramics with ultra-high hardness[J]. Scripta Materialia, 2019, 164: 135-139.

[45]

LI J, ZHANG Q, CHEN S, et al. Carbon-deficient high-entropy (Zr0.17Nb0.2Ta0.2Mo0.2W0.2)C0.89: A potential high temperature and vacuum wear-resistant material[J]. Materials & Design, 2023, 226: 111680.

[46]

SUN Q, CHEN L, CHENG J, et al. Self-lubrication of single-phase high-entropy ceramic enabled by triboinduced amorphous carbon[J]. Scripta Materialia, 2023, 227: 115273.

[47]

GORBAN’ V F, ANDREYEV A A, KARTMAZOV G N, et al. Production and mechanical properties of high-entropic carbide based on the TiZrHfVNbTa multicomponent alloy[J]. Journal of Superhard Materials, 2017, 39(3): 166-171.

[48]

CASTLE E, CSANÁDI T, GRASSO S, et al. Processing and Properties of High-Entropy Ultra-High Temperature Carbides[J]. Scientific Reports, 2018, 8(1): 8609.

[49]

KAVAK S, BAYRAK K G, BELLEK M, et al. Synthesis and characterization of (HfMoTiWZr)C high entropy carbide ceramics[J]. Ceramics International, 2022, 48(6): 7695-7705.

[50]

WANG K, CHEN L, XU C, et al. Microstructure and mechanical properties of (TiZrNbTaMo)C highentropy ceramic[J]. Journal of Materials Science & Technology, 2020, 39: 99-105.

[51]

SUN Q, TAN H, ZHU S, et al. Single-phase (Hf-Mo-Nb-Ta-Ti)C high-entropy ceramic: A potential high temperature anti-wear material[J]. Tribology International, 2021, 157: 106883.

[52]

HAI W, WU Z, ZHANG S, et al. Microstructure, mechanical and tribological properties of high-entropy (TaTiVW)C4 ceramics[J]. International Journal of Refractory Metals and Hard Materials, 2023, 112: 106114.

[53]

CHEN H, WU Z, LIU M, et.al. Synthesis, microstructure and mechanical properties of high-entropy (VNbTaMoW)C5 ceramics[J]. Journal of the European Ceramic Society, 2021, 41(15): 7498-7506.

[54]

MA M, SUN Y, WU Y, et.al. Nanocrystalline high-entropy carbide ceramics with improved mechanical properties[J]. Journal of the American Ceramic Society, 2022, 105(1): 606-613.

[55]

HAN X Q, LIN N, LI A Q, et.al. Microstructure and characterization of (Ti,V,Nb,Ta)(C,N) high-entropy ceramic[J]. Ceramics International, 2021, 47(24): 35105-35110.

[56]

YEH C T, TUAN W H. Oxidation mechanism of aluminum nitride revisited[J]. Journal of Advanced Ceramics, 2017, 6(1): 27-32.

[57]

KOVALEV A, WAINSTEIN D, KONOVALOV E, et al. Features of Tribooxidation of the High-Entropy Coating (AlCrZrTiTa)N during Dry High-Speed Cutting[J]. Coatings, 2023, 13(9): 1508.

[58]

LI H, JIANG N, LI J, et al. Hard and tough (NbTaMoW)Nx high entropy nitride films with substoichiometric nitrogen[J]. Journal of Alloys and Compounds, 2021, 889: 161713.

[59]

FENG X, ZHENG Y, WANG K, et al. High-temperature wear and oxidation behavior of (CrNbTaMoVW)N high entropy films deposited by reactive magnetron sputtering[J]. Surface and Coatings Technology, 2023, 470: 129790.

[60]

HUANG P K, YEH J W. Inhibition of grain coarsening up to 1000°C in (AlCrNbSiTiV)N superhard coatings[J]. Scripta Materialia, 2010, 62(2): 105-108.

[61]

CHANG C C, HSIAO Y T, CHEN Y L, et al. Lattice distortion or cocktail effect dominates the performance of Tantalum-based high-entropy nitride coatings[J]. Applied Surface Science, 2022, 577: 151894.

[62]

POGREBNJAK A D, YAKUSHCHENKO I V, BAGDASARYAN A A, et al. Microstructure, physical and chemical properties of nanostructured (Ti–Hf–Zr–V–Nb)N coatings under different deposition conditions[J]. Materials Chemistry and Physics, 2014, 147(3): 1079-1091.

[63]

XU W, LIAO M, LIU X, et al. Microstructures and properties of (TiCrZrVAl)N high entropy ceramics films by multi-arc ion plating[J]. Ceramics International, 2021, 47(17): 24752-24759.

[64]

YUAN M, GAO X, GU X, et al. Simultaneous enhancement of hardness and wear and corrosion resistance of high-entropy transition-metal nitride[J]. Journal of the American Ceramic Society, 2023, 106(2): 1356-1368.

[65]

CHEN T K, SHUN T T, YEH J W, et al. Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering[J]. Surface and Coatings Technology, 2004, 188-189: 193-200.

[66]

HAN X Q, LIN N, LI A Q, et al. Microstructure and characterization of (Ti,V,Nb,Ta)(C,N) high-entropy ceramic[J]. Ceramics International, 2021, 47(24): 35105-35110.

[67]

LI F, CUI W, SHAO Y, et al. Preparing high-entropy ceramic films from high-entropy alloy substrate[J]. Materials Chemistry and Physics, 2022, 287: 126365.

[68]

CHEN L, LI W, LIU P, et al. Microstructure and mechanical properties of (AlCrTiZrV)Nx high-entropy alloy nitride films by reactive magnetron sputtering[J]. Vacuum, 2020, 181: 109706.

[69]

GORBAN’ V F, ZAKIEV I M, SARZHAN G F. Comparative friction characteristics of high-entropy mononitride coatings[J]. Journal of Friction and Wear, 2016, 37(3): 263-267.

[70]

LI MJ,WANG CY,WANG GQ,et al. Preparation technology and development trend of nitride ceramic powders[J]. Advanced Ceramics,2023,44(03):173-182.

[71]

KAO W H, SU Y L, HORNG J H, et al. Structure, mechanical properties and thermal stability of nitrogendoped TaNbSiZrCr high entropy alloy coatings and their application to glass moulding and micro-drills[J]. Surface and Coatings Technology, 2021, 405: 126539.

[72]

GILD J, ZHANG Y, HARRINGTON T, et al. High-Entropy Metal Diborides: A New Class of High-Entropy Materials and a New Type of Ultrahigh Temperature Ceramics[J]. Scientific Reports, 2016, 6(1): 37946.

[73]

YU W, LI W, LIU P, et al. Silicon-content-dependent microstructures and mechanical behavior of (AlCrTiZrMo)-Six-N high-entropy alloy nitride films[J]. Materials & Design, 2021, 203: 109553.

[74]

ZHAO P, ZHU J, LI M, et al. Influence of molten-salt-synthesised high-entropy (V0.2Cr0.2Mo0.2W0.2Ni0.2)B powder characteristics on superhard mechanism during spark plasma sintering[J]. Journal of Alloys and Compounds, 2023, 947: 169618.

[75]

ZHAO P, ZHU J, YANG K, et al. Outstanding wear resistance of plasma sprayed high-entropy monoboride composite coating by inducing phase structural cooperative mechanism[J]. Applied Surface Science, 2023, 616: 156516.

[76]

ZHANG J, ZHENG X, LIU J X, et al. Tribological and wear-resistant behaviors of single-phase (Dy0.2Ho0.2Er0.2Tm0.2Lu0.2)B12 high-entropy ceramic[J]. Journal of the European Ceramic Society, 2024: 3664-3674.

[77]

AKHTAR S S. A critical review on self-lubricating ceramic-composite cutting tools[J]. Ceramics International, 2021,47:20745-20767.

[78]

CHEN W, ZHU Z, ZHENG M, et al. Formation mechanism and high-temperature self-lubricating behavior of (HfMoNbTaTi)C system single-phase high-entropy ceramics[J]. Journal of the European Ceramic Society, 2023, 43(12): 5099-5107.

[79]

TORRES H, RODRÍGUEZ RIPOLL M, PRAKASH B. Tribological behaviour of self-lubricating materials at high temperatures[J]. International Materials Reviews, 2018, 63(5): 309-340.

[80]

VOEVODIN A A, MURATORE C, AOUADI S M. Hard coatings with high temperature adaptive lubrication and contact thermal management: review[J]. Surface and Coatings Technology, 2014, 257: 247-265.

[81]

TORRES H, SLAWIK S, GACHOT C, et al. Microstructural design of self-lubricating laser claddings for use in high temperature sliding applications[J]. Surface and Coatings Technology, 2018, 337: 24-34

[82]
CHEN, WB. Toughening, self-lubrication and tribological properties of high-entropy carbide ceramic composites [D]. Gansu: Lanzhou University of Science and Technology Ph.D. thesis,2024.
[83]

DUAN W, SUN Y, LIU C, et al. Study on the formation mechanism of the glaze film formed on Ni/Ag composites[J]. Tribology International, 2016, 95: 324-332.

[84]

VOEVODIN A A, HU J J, FITZ T A, et al. Tribological properties of adaptive nanocomposite coatings made of yttria stabilized zirconia and gold[J]. Surface and Coatings Technology, 2001, 146-147: 351-356.

[85]

TAKEICHI Y, INADA M, MINAMI K, et al. Tribological Properties of Copper Molybdate Powder Solid Lubricants under High Temperature Conditions[J]. Tribology Online, 2015, 10(2): 127-137.

[86]

NIETO A, BISHT A, LAHIRI D, et al. Graphene reinforced metal and ceramic matrix composites: a review[J]. International Materials Reviews, 2017, 62(5): 241-302.

[87]

BARBAROSSA S, ORRÙ R, GARRONI S, et.al. Ultra high temperature high-entropy borides: Effect of graphite addition on oxides removal and densification behaviour[J]. Ceramics International, 2021, 47(5): 6220-6231.

[88]

WEI X F, LIU J X, BAO W, et.al. High-entropy carbide ceramics with refined microstructure and enhanced thermal conductivity by the addition of graphite[J]. Journal of the European Ceramic Society, 2021, 41(9): 4747-4754.

[89]

PENG P, LIU J X, SONG J, et.al. High-entropy diboride ceramics with graphite addition[J]. Journal of the European Ceramic Society, 2024, 44(5): 2695-2703.

[90]

CUI P, LI W, LIU P, et.al. The influence of WS2 layer thickness on microstructures and mechanical behavior of high-entropy (AlCrTiZrNb)N/WS2 nanomultilayered films[J]. Surface and Coatings Technology, 2022, 433: 128091.

[91]

SERRA E C, SOARES V F D, FERNANDEZ D A R, et al. Influence of WS2 content on high temperature wear performance of magnetron sputtered TiN-WSx thin films[J]. Ceramics International, 2019, 45(16): 19918-19924.

[92]

WANG JZ,JIANG SW,ZHU XP. Research progress on self-lubricating composite coatings with added WS2/MoS2 solid lubricant[J]. Materials Reports,2019,33(17):2868-2872.

[93]

MENG F, YANG C, HAN H. Study on tribological performances of MoS2 coating at high temperature[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2018, 232(8): 964-973.

[94]

KIMURA Y, WAKABAYASHI T, OKADA K, et al. Boron nitride as a lubricant additive[J]. Wear, 1999, 232(2): 199-206.

[95]

TAN H. High temperature tribological behavior of Mo–12Si–8.5B alloy reinforced with MoAlB ceramic[J]. Tribology International, 2020,150:106344.

[96]

DU C F, XUE Y, WANG C, et al. Synthesis of a high-entropy (TiVCrMo)3AlC2 MAX and its tribological properties in a wide temperature range[J]. Journal of the European Ceramic Society, 2023, 43(11): 4684-4695.

[97]

ERDEMIR A. A crystal-chemical approach to lubrication by solid oxides[J].Tribology Letters,2000,8(2)97-102

[98]

KONG L, BI Q, ZHU S, et al. Effect of CuO on self-lubricating properties of ZrO2(Y2O3)–Mo composites at high temperatures[J]. Journal of the European Ceramic Society, 2014, 34(5): 1289-1296.

[99]

AOUADI S M, PAUDEL Y, LUSTER B, et al. Adaptive Mo2N/MoS2/Ag Tribological Nanocomposite Coatings for Aerospace Applications[J]. Tribology Letters, 2008, 29(2): 95-103.

[100]

ZHOU H, SHI X, HUANG Y, et al. Tribological Performance of M50-Ag-TiC Self-Lubricating Composites at Elevated Temperature[J]. Journal of Materials Engineering and Performance, 2018, 27(7): 3731-3741.

[101]

XIN B, YU Y, ZHOU J, et al. Effect of silver vanadate on the lubricating properties of NiCrAlY laser cladding coating at elevated temperatures[J]. Surface and Coatings Technology, 2016, 307: 136-145.

[102]

SU W, ZHANG J, ZHANG J, et al. Microstructure of HVOF-sprayed Ag–BaF2·CaF2–Cr3C2–NiCr coating and its tribological behavior in a wide temperature range (25 °C to 800 °C)[J]. Ceramics International, 2021, 47(1): 865-876.

[103]

DU S, LI Z, HE Z, et al. Effect of temperature on the friction and wear behavior of electroless Ni–P–MoS2–CaF2 self-lubricating composite coatings[J]. Tribology International, 2018, 128: 197-203.

Advanced Ceramics
Pages 1-23
Cite this article:
NIE X-D, XU J-Y, ZHANG Z-C, et al. The Progress of Research on High-Entropy Ceramics in The Field of Tribology. Advanced Ceramics, 2025, 46(1): 1-23. https://doi.org/10.16253/j.cnki.37-1226/tq.2025.01.001
Metrics & Citations  
Article History
Copyright
Rights and Permissions
Return