AI Chat Paper
Discover the SciOpen Platform and Achieve Your Research Goals with Ease.
Search articles, authors, keywords, DOl and etc.
{{expandStatus?'Exit ':''}}Advanced Search
To clarify the plastic law and hardening characteristics of deformation and failure of staggered zone under high in-situ stress unloading conditions with excavation in underground engineering, a series of triaxial tests under different confining pressures and different loading and unloading stress paths was conducted. The plastic deformation laws of the staggered zone under different loading and unloading stress paths were deeply investigated. Based on the results of the experiments, the dependency of stress path of internal variables such as the equivalent plastic work, the equivalent plastic strain and the plastic volumetric strain as hardening parameters were further explored in the stress space. Meanwhile, a modified formula for hardening parameters with the independency of stress path was proposed. The results showed that, 1) The effect of stress path was significant on the deformation properties of staggered zone under high in-situ stress. The high initial confining pressure would inhibit the development of the circumferential plastic deformation of samples with the staggered zone under the same unloading stress path. And the plastic volumetric residual strain (6%) of samples with the staggered zone under the stress path of unloading axial pressure and confining pressure was significantly greater than that of other unloading stress paths (2%−4%) under the same initial confining pressure. The promoting effects of different stress paths on the plastic volumetric deformation of the staggered zone were as follows. The promoting effect of the stress path of unloading axial pressure and unloading confining pressure was the strongest, that of the stress path of constant axial pressure and unloading confining pressure was the second stronger, and that of the stress path of loading axial pressure and unloading confining pressure was the weakest. 2) There were a certain of the dependency of stress path of its internal variables such as plastic volumetric strain, equivalent plastic strain and equivalent plastic work during the deformation and failure process of the staggered zone in different unloading stress paths. Therefore, it is not accurate to directly take any of the above state parameters as the hardening parameters and assume that it is independent of the stress paths in the elastic-plastic analysis of staggered zone. Therefore, a modified method of the equivalent plastic work was proposed. It was found that when the parameter ns reflecting the material properties of staggered zone was equal to −0.4, the modified equivalent plastic work had the obvious independency of stress path, which was more appropriate for describing the unloading plastic strain hardening characteristics of the staggered zone under high in-situ stress unloading conditions. The plastic mechanical characteristics of the staggered zone revealed in this paper can further deepen the understanding of deformation and failure of the staggered zone under high in-situ stress unloading conditions, and provide a theoretical basis for the analysis of the failure mechanism and support control of the staggered zone in practical engineering.
PAN Jia-zheng. Hydropower and China[J]. Journal of Hydroelectric Engineering, 2004, 30(12): 17−21.
XU Ding-ping, FEGN Xia-ting, CUI Yu-jun, et al. On failure mode and shear behavior of rock mass with interlayer staggered zone[J]. Rock and Soil Mechanics, 2012, 33(1): 129−136.
DUAN Shu-qian, FENG Xia-ting, JIANG Quan, et al. Experimental study of mechanical properties of staggered zones under loading and unloading conditions of high stresses[J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(6): 1090−1101.
DUAN S Q, FENG X T, JIANG Q, et al. In situ observation of failure mechanisms controlled by rock masses with weak interlayer zones in large underground cavern excavations under high geostress[J]. Rock Mechanics and Rock Engineering, 2017, 50(9): 2465−2493.
DUAN Shu-qian, FENG Xia-ting, JIANG Quan, et al. Mechanical characteristics of interlayer staggered zones under different preconsolidation pressures[J]. Rock and Soil Mechanics, 2017, 38(1): 49−60.
DUAN S Q, JIANG Q, XU D P, et al. Experimental study of mechanical behavior of interlayer staggered zone under cyclic loading and unloading condition[J]. International Journal of Geomechanics, 2020, 20(3): 04019187-1-04019187-12.
DUAN S Q, JIANG Q, LIU G F, et al. An Insight into the excavation-induced stress paths on mechanical response of weak interlayer zone in underground cavern under high geostress[J]. Rock Mechanics and Rock Engineering, 2021, 54(3): 1331−1354.
WANG Jing-tao, ZHOU Bao-chun. Demonstration on dependency of constitutive relations of soils with stress paths[J]. Chinese Journal of Rock Mechanics and Engineering, 2008, 27(Suppl. 1): 2269−2674.
CAI Y Q, HAO B B, GU C, et al. Effect of anisotropic consolidation stress paths on the undrained shear behavior of reconstituted Wenzhou clay[J]. Engineering Geology, 2018, 242: 22−33.
LI Jian-peng, GAO Ling, MU Huan-sheng. Dilatancy characteristics of sandstone and its function of dilatancy angle under high confining pressure and unloading conditions[J]. Rock and Soil Mechanics, 2019, 40(6): 2119−2126.
ZHENG Ying-ren, KONG Liang. Plastic mechanics of rock and soil[M]. Beijing: China Architecture & Building Press, 2010.
JIANG Jia-qi, XU Ri-qing, YU Jian-lin, et al. An equivalent plastic work hardening model for clay based on the egg-shaped yield function[J]. Chinese Journal of Rock Mechanics and Engineering, 2021, 40(3): 619−628.
FUMIO T. Stress-strain behavior of an idealized anisotropic granular material[J]. Soils and Foundations, 1980, 20(3): 75−90.
HUANG Wen-xi. Theory of elastoplastic stress strain model for soil[J]. Rock and Soil Mechanics, 1979, 2(1): 1−20.
HUANG Wen-xi, PU Jia-liu, CHEN Yu-jiong. Hardening rule and yield function for soils[J]. Chinese Journal of Geotechnical Engineering, 1981, 3(3): 19−26.
YAO Yang-ping, HOU Wei, LUO Ting. Unified hardening model for soils[J]. Chinese Journal of Rock Mechanics and Engineering, 2009, 28(10): 2135−2151.
YAO Yang-ping, TIAN Yu, ZHOU An-nan, et al. Unified hardening law for soils and its construction[J]. Scientia Sinica (Technologica), 2019, 49(1): 26−34.
YAO Y P, SUN D A, MATSUOKA H. A unified constitutive model for both clay and sand with hardening parameter independent on stress path[J]. Computers and Geotechnics, 2007, 35(2): 210−222.
MA Xian-feng, MOCHIZUKI A, CAI Min. Development of elastoplastic model with revised plastic work function hardening function based on plane strain tests[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(6): 887−893.
MA Xian-feng, LIU Chang, XU Liang-yi. Application of modified double yield surface model in foundation excavation of soft soil[J]. Chinese Journal of Rock Mechanics and Engineering, 2019, 38(Suppl.2): 3883−3893.
PENG Fang-le, BAI Xiao-yu, YA Xin, et al. Modified plastic-work hardening parameter and function independent of stress path for sandy soil[J]. Chinese Journal of Rock Mechanics and Engineering, 2008, 27(6): 1171−1180.
QIU Shi-li, FENG Xia-ting, ZHANG Chuan-qing, et al. Experimental research on mechanical properties of deep marble under different initial damage levels and unloading path[J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(8): 1686−1697.
WAN Zheng, QIU Ren-dong, SONG Chen-chen. A structural constitutive model of undisturbed saturated clays based on the uniform hardening parameter[J]. Chinese Journal of Rock Mechanics and Engineering, 2019, 38(9): 1905−1918.
ZHAO Yang, ZHOU Hui, FENG Xia-ting, et al. Undrained shear behaviour of intact infilled joint soil with triaxial shear tests under high pressure and its influence factor analysis[J]. Rock and Soil Mechanics, 2013, 34(2): 365−371.
MENG Guo-tao, FAN Yi-lin, JIANG Ya-li, et al. Key rock mechanical problems and measures for huge caverns of Baihetan hydropower plant[J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(12): 2549−2560.
YANG Ai-wu, YANG Shao-kun, ZHANG Zhen-dong. Experimental study of mechanical properties of dredger fill under different unloading rates and stress paths[J]. Rock and Soil Mechanics, 2020, 41(9): 2891−2900.
LIU Jie, ZHANG Li-ming, CONG Yu, et al. Research on the mechanical characteristics of granite failure process under true triaxial stress path[J]. Rock and Soil Mechanics, 2021, 42(8): 2069−2077.
DENG Hua-feng, YUAN Xian-fan, LI Jian-lin, et al. Research on failure characteristics and determination method for compressive strength of soft rock in triaxial loading and unloading tests[J]. Rock and Soil Mechanics, 2014, 35(4): 959−964.
DING Xiang, ZHANG Guang-qing WANG Zhi-ying. Coefficient of the effective plastic strain based on associated flow of Drucker-Prager criterion[J]. Chinese Journal of Applied Mechanics, 2017, 34(1): 1−7.
京公网安备11010802044758号