AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Journal of Advanced Ceramics Article
PDF (2.6 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

BS0.5BNT-based relaxor ferroelectric ceramic/glass–ceramic composites for energy storage

Xuhai Shi†, Kai Li†, Zong-Yang Shen( ), Junqi Liu, Chaoqun Chen, Xiaojun Zeng, Bo Zhang, Fusheng Song, Wenqin Luo, Zhumei Wang, Yueming Li
China National Light Industry Key Laboratory of Functional Ceramic Materials, Energy Storage and Conversion Ceramic Materials Engineering Laboratory of Jiangxi Province, Advanced Ceramic Materials Research Institute, School of Materials Science and Engineering, Jingdezhen Ceramic University, Jingdezhen 333403, China

† Xuhai Shi and Kai Li contributed equally to this work.

Show Author Information

Graphical Abstract

Abstract

Relaxor ferroelectric ceramics have very high dielectric constant (εr) but relatively low electrical breakdown strength (Eb), while glass–ceramics exhibit higher Eb due to the more uniformly dispersed amorphous phases and submicrocrystals/nanocrystals inside. How to effectively combine the advantages of both relaxor ferroelectric ceramics and glass–ceramics is of great significance for the development of new dielectric materials with high energy storage performance. In this work, we firstly prepared BaO–SrO–Bi2O3–Na2O–TiO2–Al2O3–SiO2 (abbreviated as GS) glass powders, and then fabricated (Ba0.3Sr0.7)0.5(Bi0.5Na0.5)0.5TiO3 + x wt% GS ceramic composites (abbreviated as BS0.5BNT–xGS, x = 0, 2, 6, 10, 14, 16, and 18). Submicrocrystals/nanocrystals with a similar composition to BS0.5BNT were crystalized from the glass, ensuring the formation of uniform core–shell structure in BS0.5BNT–xGS relaxor ferroelectric ceramic/glass–ceramic composites. When the addition amount of GS was 14 wt%, the composite possessed both high εr (> 3200 at 1 kHz) and high Eb (≈ 170 kV/cm) at room temperature, and their recoverable energy storage density and efficiency were Wrec = 2.1 J/cm3 and η = 65.2%, respectively. The BS0.5BNT–14GS composite also had several attractive properties such as good temperature, frequency, cycle stability, and fast charge–discharge speed. This work provides insights into the relaxor ceramic/glass–ceramic composites for pulsed power capacitors and sheds light on the utilization of the hybrid systems.

Keywords

relaxor ferroelectricsenergy storage ceramicsglass–ceramicsBi0.5Na0.5TiO3 (BNT)Ba0.3Sr0.7TiO3 (BST)

References

[1]
Li DX, Zeng XJ, Li ZP, et al. Progress and perspectives in dielectric energy storage ceramics. J Adv Ceram 2021, 10: 675–703.
Crossref Google Scholar
[2]
Jayakrishnan AR, Silva JPB, Kamakshi K, et al. Are lead-free relaxor ferroelectric materials the most promising candidates for energy storage capacitors? Prog Mater Sci 2023, 132: 101046.
Crossref Google Scholar
[3]
Yang LT, Kong X, Li F, et al. Perovskite lead-free dielectrics for energy storage applications. Prog Mater Sci 2019, 102: 72–108.
Crossref Google Scholar
[4]
Pan ZB, Wang P, Hou X, et al. Fatigue-free Aurivillius phase ferroelectric thin films with ultrahigh energy storage performance. Adv Energy Mater 2020, 10: 2001536.
Crossref Google Scholar
[5]
Pan H, Li F, Liu Y, et al. Ultrahigh-energy density lead-free dielectric films via polymorphic nanodomain design. Science 2019, 365: 578–582.
Crossref Google Scholar
[6]
Balaraman AA, Dutta S. Inorganic dielectric materials for energy storage applications: A review. J Phys D Appl Phys 2022, 55: 183002.
Crossref Google Scholar
[7]
Zeng XJ, Song HB, Shen ZY, et al. Progress and challenges of ceramics for supercapacitors. J Materiomics 2021, 7: 1198–1224.
Crossref Google Scholar
[8]
Zhao PY, Cai ZM, Wu LW, et al. Perspectives and challenges for lead-free energy-storage multilayer ceramic capacitors. J Adv Ceram 2021, 10: 1153–1193.
Crossref Google Scholar
[9]
Wang G, Lu ZL, Li Y, et al. Electroceramics for high-energy density capacitors: Current status and future perspectives. Chem Rev 2021, 121: 6124–6172.
Crossref Google Scholar
[10]
Jia WX, Hou YD, Zheng MP, et al. Advances in lead-free high-temperature dielectric materials for ceramic capacitor application. IET Nanodielectrics 2018, 1: 3–16.
Crossref Google Scholar
[11]
Dang HT, Trinh TT, Nguyen CTQ, et al. Enhancement of relaxor behavior by La doping and its influence on the energy storage performance and electric breakdown strength of ferroelectric Pb(Zr0.52Ti0.48)O3 thin films. Mater Chem Phys 2019, 234: 210–216.
Crossref Google Scholar
[12]
Qiang H, Xu ZP. Enhanced energy storage properties of La-doped Pb0.99Nb0.02(Zr0.85Sn0.13Ti0.02)0.98O3 antiferroelectric ceramics. J Mater Sci-Mater El 2020, 31: 14921–14929.
Crossref Google Scholar
[13]
Yao ZH, Song Z, Hao H, et al. Homogeneous/inhomogeneous-structured dielectrics and their energy-storage performances. Adv Mater 2017, 29: 1601727.
Crossref Google Scholar
[14]
Zou KL, Dan Y, Xu HJ, et al. Recent advances in lead-free dielectric materials for energy storage. Mater Res Bull 2019, 113: 190–201.
Crossref Google Scholar
[15]
Li ZP, Li DX, Shen ZY, et al. Remarkably enhanced dielectric stability and energy storage properties in BNT–BST relaxor ceramics by A-site defect engineering for pulsed power applications. J Adv Ceram 2022, 11: 283–294.
Crossref Google Scholar
[16]
Palneedi H, Peddigari M, Hwang GT, et al. High-performance dielectric ceramic films for energy storage capacitors: Progress and outlook. Adv Funct Mater 2018, 28: 1803665.
Crossref Google Scholar
[17]
Yan J, Wang YL, Wang CM, et al. Boosting energy storage performance of low-temperature sputtered CaBi2Nb2O9 thin film capacitors via rapid thermal annealing. J Adv Ceram 2021, 10: 627–635.
Crossref Google Scholar
[18]
Zhu XP, Gao YF, Shi P, et al. Ultrahigh energy storage density in (Bi0.5Na0.5)0.65Sr0.35TiO3-based lead-free relaxor ceramics with excellent temperature stability. Nano Energy 2022, 98: 107276.
Crossref Google Scholar
[19]
Wu ZH, Liu HX, Cao MH, et al. Effect of BaO–Al2O3–B2O3–SiO2 glass additive on densification and dielectric properties of Ba0.3Sr0.7TiO3 ceramics. J Ceram Soc Jpn 2008, 116: 345–349.
Crossref Google Scholar
[20]
Chen HY, Wang X, Dong XY, et al. Adjusting the energy-storage characteristics of 0.95NaNbO3–0.05Bi(Mg0.5Sn0.5)O3 ceramics by doping linear perovskite materials. ACS Appl Mater Inter 2022, 14: 25609–25619.
Crossref Google Scholar
[21]
Tunkasiri T, Rujijanagul G. Dielectric strength of fine grained barium titanate ceramics. J Mater Sci Lett 1996, 15: 1767–1769.
Crossref Google Scholar
[22]
Gao YF, Zhu XP, Yang B, et al. Grain size modulated (Na0.5Bi0.5)0.65Sr0.35TiO3-based ceramics with enhanced energy storage properties. Chem Eng J 2022, 433: 133584.
Crossref Google Scholar
[23]
Young A, Hilmas G, Zhang SC, et al. Effect of liquid-phase sintering on the breakdown strength of barium titanate. J Am Ceram Soc 2007, 90: 1504–1510.
Crossref Google Scholar
[24]
Zhang XT, Zhao LL, Liu LW, et al. Interface and defect modulation via a core–shell design in (Na0.5Bi0.5TiO3@La2O3)–(SrSn0.2Ti0.8O3@La2O3)–Bi2O3–B2O3–SiO2 composite ceramics for wide-temperature energy storage capacitors. Chem Eng J 2022, 435: 135061.
Crossref Google Scholar
[25]
Huang JJ, Zhang Y, Ma T, et al. Correlation between dielectric breakdown strength and interface polarization in barium strontium titanate glass ceramics. Appl Phys Lett 2010, 96: 042902.
Crossref Google Scholar
[26]
Wang HX, Zhao PY, Chen LL, et al. Energy storage properties of 0.87BaTiO3–0.13Bi(Zn2/3(Nb0.85Ta0.15)1/3)O3 multilayer ceramic capacitors with thin dielectric layers. J Adv Ceram 2020, 9: 292–302.
Crossref Google Scholar
[27]
Chen IW, Wang XH. Sintering dense nanocrystalline ceramics without final-stage grain growth. Nature 2000, 404: 168–171.
Crossref Google Scholar
[28]
Chen YY, Qi JL, Zhang MH, et al. Pyrochlore-based high-entropy ceramics for capacitive energy storage. J Adv Ceram 2022, 11: 1179–1185.
Crossref Google Scholar
[29]
Liu G, Li Y, Guo B, et al. Ultrahigh dielectric breakdown strength and excellent energy storage performance in lead-free barium titanate-based relaxor ferroelectric ceramics via a combined strategy of composition modification, viscous polymer processing, and liquid-phase sintering. Chem Eng J 2020, 398: 125625.
Crossref Google Scholar
[30]
Li D, Zhou D, Wang D, et al. Improved energy storage properties achieved in (K,Na)NbO3-based relaxor ferroelectric ceramics via a combinatorial optimization strategy. Adv Funct Mater 2022, 32: 2111776.
Crossref Google Scholar
[31]
Chu BK, Hao JG, Li P, et al. High-energy storage properties over a broad temperature range in La-modified BNT-based lead-free ceramics. ACS Appl Mater Inter 2022, 14: 19683–19696.
Crossref Google Scholar
[32]
Liu Q, Hao H, Liu Z, et al. Dielectric-temperature stability and breakdown strength of the Nb-doped 0.12BiAlO3–0.88BaTiO3 ceramics with B–Al–Si glass additive. Ceram Int 2021, 47: 7135–7142.
Crossref Google Scholar
[33]
Wang T, Wang YH, Yang HB, et al. Structure, dielectric properties of low-temperature-sintering BaTiO3-based glass–ceramics for energy storage. J Adv Dielectr 2018, 8: 1850041.
Crossref Google Scholar
[34]
Wang T, Jin L, Shu LL, et al. Energy storage properties in Ba0.4Sr0.6TiO3 ceramics with addition of semi-conductive BaO–B2O3–SiO2–Na2CO3–K2CO3 glass. J Alloys Compd 2014, 617: 399–403.
Crossref Google Scholar
[35]
Zhang QM, Wang L, Luo J, et al. Improved energy storage density in barium strontium titanate by addition of BaO–SiO2–B2O3 glass. J Am Ceram Soc 2009, 92: 1871–1873.
Crossref Google Scholar
[36]
Yang HB, Yan F, Zhang G, et al. Dielectric behavior and impedance spectroscopy of lead-free Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics with B2O3–Al2O3–SiO2 glass–ceramics addition for enhanced energy storage. J Alloys Compd 2017, 720: 116–125.
Crossref Google Scholar
[37]
Yang HB, Yan F, Lin Y, et al. Enhanced energy storage properties of Ba0.4Sr0.6TiO3 lead-free ceramics with Bi2O3–B2O3–SiO2 glass addition. J Eur Ceram Soc 2018, 38: 1367–1373.
Crossref Google Scholar
[38]
Wu T, Pu YP, Zong TT, et al. Microstructures and dielectric properties of Ba0.4Sr0.6TiO3 ceramics with BaO–TiO2–SiO2 glass–ceramics addition. J Alloys Compd 2014, 584: 461–465.
Crossref Google Scholar
[39]
Su XF, Riggs BC, Tomozawa M, et al. Preparation of BaTiO3/low melting glass core–shell nanoparticles for energy storage capacitor applications. J Mater Chem A 2014, 2: 18087–18096.
Crossref Google Scholar
[40]
Shen ZY, Yu YY, Wang Y, et al. Reduced high temperature dielectric loss in BSB glass modified Ba0.3Sr0.7TiO3 ceramics for energy storage. J Mater Sci: Mater Electron 2018, 29: 1093–1097.
Crossref Google Scholar
[41]
Shen ZY, Wang Y, Tang YX, et al. Glass modified barium strontium titanate ceramics for energy storage capacitor at elevated temperatures. J Materiomics 2019, 5: 641–648.
Crossref Google Scholar
[42]
Ye Y, Zhang SC, Dogan F, et al. Influence of nanocrystalline grain size on the breakdown strength of ceramic dielectrics. In: Proceedings of the 14th IEEE International Pulsed Power Conference, Dallas, USA, 2003: 719–722.
[43]
Huang JH, Qi H, Gao Y, et al. Expanded linear polarization response and excellent energy-storage properties in (Bi0.5Na0.5)TiO3–KNbO3 relaxor antiferroelectrics with medium permittivity. Chem Eng J 2020, 398: 125639.
Crossref Google Scholar
[44]
Gorzkowski EP, Pan MJ, Bender BA, et al. Effect of additives on the crystallization kinetics of barium strontium titanate glass–ceramics. J Am Ceram Soc 2008, 91: 1065–1069.
Crossref Google Scholar
[45]
Liu CS, Xie SF, Bai HR, et al. Excellent energy storage performance of niobate-based glass–ceramics via introduction of nucleating agent. J Materiomics 2022, 8: 763–771.
Crossref Google Scholar
[46]
Zhou Y, Zhang QM, Luo J, et al. Structural and dielectric characterization of Gd2O3-added BaO–Na2O–Nb2O5–SiO2 glass–ceramic composites. Scripta Mater 2011, 65: 296–299.
Crossref Google Scholar
[47]
[Li DX, Shen ZY, Li ZP, et al. P–E hysteresis loop going slim in Ba0.3Sr0.7TiO3-modified Bi0.5Na0.5TiO3 ceramics for energy storage applications. J Adv Ceram 2020, 9: 183–192.
Crossref Google Scholar
[48]
Shannon RD. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Crystallogr A 1976, 32: 751–767.
Crossref Google Scholar
[49]
Li DX, Shen ZY, Li ZP, et al. Optimization of polarization behavior in (1−x)BSBNT–xNN ceramics for pulsed power capacitors. J Mater Chem C 2020, 8: 7650–7657.
Crossref Google Scholar
[50]
Chen Y, Pen ZH, Wang QY, et al. Crystalline structure, ferroelectric properties, and electrical conduction characteristics of W/Cr co-doped Bi4Ti3O12 ceramics. J Alloys Compd 2014, 612: 120–125.
Crossref Google Scholar
[51]
Gorzkowski EP, Pan MJ, Bender B, et al. Glass–ceramics of barium strontium titanate for high energy density capacitors. J Electroceram 2007, 18: 269–276.
Crossref Google Scholar
[52]
Zhang WQ, Wang JW, Xue SX, et al. Effect of La2O3 additive on the dielectric properties of barium strontium titanate glass–ceramics. J Mater Sci: Mater Electron 2014, 25: 4145–4149.
Crossref Google Scholar
[53]
Dittmer R, Gobeljic D, Jo W, et al. Ergodicity reflected in macroscopic and microscopic field-dependent behavior of BNT-based relaxors. J Appl Phys 2014, 115: 084111.
Crossref Google Scholar
[54]
Du XY, Pu YP, Peng X, et al. Enhanced energy storage and discharge-charge performance by changing glass phase content in potassium sodium niobate glass–ceramics. Ceram Int 2020, 46: 11492–11498.
Crossref Google Scholar
[55]
Du XY, Pu YP, Li X, et al. Optimizing the energy storage performance of K2O–Nb2O5–SiO2 based glass–ceramics with excellent temperature stability. Ceram Int 2021, 47: 8987–8995.
Crossref Google Scholar
[56]
Chen Y, Wang SZ, Zhou HJ, et al. A systematic analysis of the radial resonance frequency spectra of the PZT-based (Zr/Ti = 52/48) piezoceramic thin disks. J Adv Ceram 2020, 9: 380–392.
Crossref Google Scholar
[57]
Kishimoto A, Endo K, Motohira N, et al. Strength distribution of titania ceramics after high-voltage screening. J Mater Sci 1996, 31: 3419–3425.
Crossref Google Scholar
[58]
Huang Y, Li F, Hao H, et al. (Bi0.51Na0.47)TiO3 based lead free ceramics with high energy density and efficiency. J Materiomics 2019, 5: 385–393.
Crossref Google Scholar
[59]
Huan Y, Wang XZ, Zheng YM, et al. Achieving excellent energy storage reliability and endurance via mechanical performance optimization strategy in engineered ceramics with core–shell grain structure. J Materiomics 2022, 8: 601–610.
Crossref Google Scholar
[60]
Li DX, Shen ZY, Li ZP, et al. Effect of (Nb2/3Mg1/3)4+ complex on the dielectric and ferroelectric properties of (Ba0.3Sr0.7)0.35(Bi0.5Na0.5)0.65TiO3 ceramics for energy storage. J Mater Sci-Mater El 2020, 31: 3648–3653.
Crossref Google Scholar
[61]
Ahn CW, Amarsanaa G, Won SS, et al. Antiferroelectric thin-film capacitors with high energy-storage densities, low energy losses, and fast discharge times. ACS Appl Mater Inter 2015, 7: 26381–26386.
Crossref Google Scholar
Journal of Advanced Ceramics
Volume 12 Issue 4,
April 2023
Pages 695-710
DOI: 10.26599/JAC.2023.9220713
Cite this article:
Shi X, Li K, Shen Z-Y, et al. BS0.5BNT-based relaxor ferroelectric ceramic/glass–ceramic composites for energy storage. Journal of Advanced Ceramics, 2023, 12(4): 695-710. https://doi.org/10.26599/JAC.2023.9220713

2509

Views

564

Downloads

14

Crossref

12

Web of Science

14

Scopus

1

CSCD

Altmetrics
Received: 16 November 2022
Revised: 11 December 2022
Accepted: 28 December 2022
Published: 24 March 2023
© The Author(s) 2022.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Return