AI Chat Paper
Discover the SciOpen Platform and Achieve Your Research Goals with Ease.
Search articles, authors, keywords, DOl and etc.
{{expandStatus?'Exit ':''}}Advanced Search
While the use of low-melting-point metals as sintering aids for high-entropy carbide (HEC) ceramics has been well established, their existence can compromise hardness due to residual metallic inclusions. This study demonstrates an innovative strategy to meet this challenge, where (Ti,Zr,Nb,Ta,Mo)C high-entropy carbide ceramics with ultrafine grains and enhanced hardness are obtained through chromium (Cr)-metal-assisted spark plasma sintering (SPS) at a temperature as low as 1600 °C. The results show that the addition of 5 vol% Cr promotes the formation of highly densified single HEC phase ceramics with a high relative density (98.4%) and an ultrafine-grained microstructure (0.17 μm). This low-temperature densification mechanism can be attributed to Cr’s solid-solution effect within the matrix and the increased carbon vacancies generated during sintering. The grain size of the (Ti,Zr,Nb,Ta,Mo)C ceramics with 5 vol% Cr metal addition is significantly smaller than that of Cr-free (Ti,Zr,Nb,Ta,Mo)C ceramics sintered at 2000 °C (3.03 μm) or via traditional low-temperature liquid-phase sintering (1.3–1.5 μm). Importantly, the addition of 5 vol% Cr substantially increased the hardness of the ceramics, with a remarkable increase from 23.57 to 28.16 GPa compared to that of the pure (Ti,Zr,Nb,Ta,Mo)C ceramics, owing to the fine-grain strengthening and solid-solution strengthening mechanisms. This work highlights the uniqueness of Cr metal as a sintering aid in achieving densification and hardness improvements in (Ti,Zr,Nb,Ta,Mo)C ceramics, offering a promising strategy for improving the properties of HEC materials for further development in the near future.
Cao ZN, Sun JL, Meng LT, et al. Progress in densification and toughening of high entropy carbide ceramics. J Mater Sci Technol 2023, 161: 10–43.
Qin Y, Liu JX, Liang YC, et al. Equiatomic 9-cation high-entropy carbide ceramics of the IVB, VB, and VIB groups and thermodynamic analysis of the sintering process. J Adv Ceram 2022, 11: 1082–1092.
Xiang HM, Xing Y, Dai FZ, et al. High-entropy ceramics: Present status, challenges, and a look forward. J Adv Ceram 2021, 10: 385–441.
Cai FY, Ni DW, Bao WC, et al. Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites. Compos Part B Eng 2022, 243: 110177.
Sun QC, Chen WY, Zhu SY, et al. A (Hf0.2Mo0.2Nb0.2Ta0.2Ti0.2)C system high-entropy ceramic with excellent mechanical and tribological properties prepared at low temperature. Tribol Int 2023, 184: 108471.
Guo WJ, Hu J, Fang W, et al. A novel strategy for rapid fabrication of continuous carbon fiber reinforced (TiZrHfNbTa)C high-entropy ceramic composites: High-entropy alloy in situ reactive melt infiltration. J Eur Ceram Soc 2023, 43: 2295–2305.
Sarker P, Harrington T, Toher C, et al. High-entropy high-hardness metal carbides discovered by entropy descriptors. Nat Commun 2018, 9: 4980.
Castle E, Csanádi T, Grasso S, et al. Processing and properties of high-entropy ultra-high temperature carbides. Sci Rep 2018, 8: 8609.
Anwer Z, Huang SG, Vleugels J. Liquid phase assisted synthesis of (Ti,V,Nb,Ta,W)C–Ni high entropy carbide cermets by conventional pressureless sintering. Int J Refract Met H 2022, 107: 105914.
Pötschke J, Dahal M, Vornberger A, et al. Production and properties of high entropy carbide based hardmetals. Metals 2021, 11: 271.
Luo SC, Guo WM, Plucknett K, et al. Low-temperature densification of high-entropy (Ti,Zr,Nb,Ta,Mo)C–Co composites with high hardness and high toughness. J Adv Ceram 2022, 11: 805–813.
Wang XG, Guo WM, Kan YM, et al. Densification behavior and properties of hot-pressed ZrC ceramics with Zr and graphite additives. J Eur Ceram Soc 2011, 31: 1103–1111.
Tang Y, Zhang GJ, Xue JX, et al. Densification and mechanical properties of hot-pressed ZrN ceramics doped with Zr or Ti. J Eur Ceram Soc 2013, 33: 1363–1371.
Sciti D, Guicciardi S, Nygren M. Spark plasma sintering and mechanical behaviour of ZrC-based composites. Scripta Mater 2008, 59: 638–641.
Mao HR, Dong ET, Jin SB, et al. Ultrafast high-temperature synthesis and densification of high-entropy carbides. J Eur Ceram Soc 2022, 42: 4053–4065.
Kaufmann K, Maryanovsky D, Mellor WM, et al. Discovery of high-entropy ceramics via machine learning. npj Comput Mater 2020, 6: 42.
Su WT, Chen L, Huo SJ, et al. Fracture mode transition from intergranular to transgranular in (TiZrNbTaCr)C: The grain boundary purification effect of Cr carbide. J Eur Ceram Soc 2024, 44: 1881–1889.
Wang YC, Csanádi T, Fogarassy Z, et al. The role of Cr addition on the processing and mechanical properties of high entropy carbides. J Eur Ceram Soc 2022, 42: 5273–5279.
Ding QQ, Zhang Y, Chen X, et al. Tuning element distribution, structure and properties by composition in high-entropy alloys. Nature 2019, 574: 223–227.
Yin J, Zhang BH, Liu XJ, et al. Densification, microstructural tailoring and property improvement of (Ta,Hf)C-based ultra-temperature solid solution ceramics. Adv Ceram 2021, 42: 112–138.
Su WT, Chen L, Zhang W, et al. Insights into grain boundary segregation and solubility limit of Cr in (TiZrNbTaCr)C. J Mater Sci Technol 2023, 139: 1–9.
Mellor WM, Kaufmann K, Dippo OF, et al. Development of ultrahigh-entropy ceramics with tailored oxidation behavior. J Eur Ceram Soc 2021, 41: 5791–5800.
Zhang P, Cheng CY, Xu M, et al. High-entropy (Hf0.25Zr0.25Ti0.25Cr0.25)B2 ceramic incorporated SiC–Si composite coating to protect C/C composites against ablation above 2400 K. Ceram Int 2022, 48: 27106–27119.
Luo SC, Guo WM, Fang ZL, et al. Effect of carbon content on the microstructure and mechanical properties of high-entropy (Ti0.2Zr0.2Nb0.2Ta0.2Mo0.2)C x ceramics. J Eur Ceram Soc 2022, 42: 336–343.
Kata D, Shirai K, Ohyanagi M, et al. Formation mechanism of AlN–SiC solid solution by combustion nitridation in Si3N4–Si–Al–C system. J Am Ceram Soc 2001, 84: 726–732.
Liu JX, Guo LW, Wu Y, et al. Lattice rigidity in high-entropy carbide ceramics with carbon vacancies. J Am Ceram Soc 2023, 106: 5612–5619.
Guillermet AF, Grimvall G. Cohesive properties and vibrational entropy of 3d-transition metal carbides. J Phys Chem Solids 1992, 53: 105–125.
Chen L, Zhang W, Lu WY, et al. Low thermal conductivity of dense (TiZrHfVNbTa)C x high-entropy carbides by tailoring carbon stoichiometry. J Adv Ceram 2023, 12: 49–58.
Liu Y, Guo WM, Xu L, et al. Low-temperature sintered (Ti,Zr,Nb,Ta,Mo)C-based composites toughened with damage-free SiCw. J Eur Ceram Soc 2023, 43: 1740–1745.
Pak AY, Sotskov V, Gumovskaya AA, et al. Machine learning-driven synthesis of TiZrNbHfTaC5 high-entropy carbide. npj Comput Mater 2023, 9: 7.
Wang YC, Csanádi T, Zhang HF, et al. Enhanced hardness in high-entropy carbides through atomic randomness. Adv Theory Simul 2020, 3: 2000111.
Zhang BH, Yin J, Wang YC, et al. Low temperature densification mechanism and properties of Ta1− x Hf x C solid solutions with decarbonization and phase transition of Cr3C2. J Materiomics 2021, 7: 672–682.
Peng YB, Zhou P, Bu MJ, et al. A thermodynamic evaluation of the C–Cr–Nb system. Calphad 2016, 53: 10–19.
Clementi E, Raimondi DL, Reinhardt WP. Atomic screening constants from SCF functions II. atoms with 37 to 86 electrons. J Chem Phys 1967, 47: 1300–1307.
Dai FZ, Sun YJ, Wen B, et al. Temperature dependent thermal and elastic properties of high entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)B2: Molecular dynamics simulation by deep learning potential. J Mater Sci Technol 2021, 72: 8–15.
Yang Y, Bi JQ, Sun KN, et al. The effect of chemical element on hardness in high-entropy transition metal diboride ceramics. J Eur Ceram Soc 2023, 43: 5774–5781.
Hua DP, Zhou Q, Shi YR, et al. Revealing the deformation mechanisms of <110> symmetric tilt grain boundaries in CoCrNi medium-entropy alloy. Int J Plasticity 2023, 171: 103832.
977
Views
334
Downloads
0
Crossref
0
Web of Science
0
Scopus
0
CSCD
Altmetrics
This is an open access article under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0, http://creativecommons.org/licenses/by/4.0/).
京公网安备11010802044758号