AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (73.7 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Review | Open Access

Combinatorial optimization of perovskite-based ferroelectric ceramics for energy storage applications

Suwei Dai1Mengyang Li2Xiaowen Wu1( )Yunyi Wu3( )Xiang Li4Yanan Hao5Bingcheng Luo2( )
Engineering Research Center of Ministry of Education for Geological Carbon Storage and Low Carbon Utilization of Resources, Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes, National Laboratory of Mineral Materials, School of Materials Science and Technology, China University of Geosciences Beijing, Beijing 100083, China
College of Science, China Agricultural University, Beijing 100083, China
Research Center for Comprehensive Energy Technology, CTG Science and Technology Research Institute, Beijing 100038, China
School of Energy and Power Engineering, Beihang University, Beijing 100191, China
State Key Laboratory of Information Photonics and Optical Communications & School of Science, Beijing University of Posts and Telecommunications, Beijing 100876, China
Show Author Information

Graphical Abstract

Abstract

With the increasing impacts of climate change and resource depletion, dielectric capacitors, with their exceptional stability, fast charging and discharging rates, and ability to operate under more extreme conditions, are emerging as promising high-demand candidates for high-performance energy storage devices, distinguishing them from traditional electrochemical capacitors and batteries. However, due to the shortcomings of various dielectric ceramics (e.g., paraelectrics (PEs), ferroelectrics (FEs), and antiferroelectrics (AFEs)), their low polarizability, low breakdown strength (BDS), and large hysteresis loss limit their standalone use in the advancement of energy storage ceramics. Therefore, synthesizing novel perovskite-based materials that exhibit high energy density, high energy efficiency, and low loss is crucial for achieving superior energy storage performance. In this review, we outline the recent development of perovskite-based ferroelectric energy storage ceramics from the perspective of combinatorial optimization for tailoring ferroelectric hysteresis loops and comprehensively discuss the properties arising from the different combinations of components. We also provide future guidelines in this realm. Therefore, the combinatorial optimization strategy in this review will open up a practical route toward the application of new high-performance ferroelectric energy storage devices.

References

[1]

Zhao PY, Chen LL, Li LT, et al. Ultrahigh energy density with excellent thermal stability in lead-free multilayer ceramic capacitors viacomposite strategy design. J Mater Chem A 2021, 9: 25914–25921.

[2]

Zhao PY, Cai ZM, Chen LL, et al. Ultra-high energy storage performance in lead-free multilayer ceramic capacitors via a multiscale optimization strategy. Energy Environ Sci 2020, 13: 4882–4890.

[3]

Zhao PY, Wang HX, Wu LW, et al. High-performance relaxor ferroelectric materials for energy storage applications. Adv Energy Mater 2019, 9: 1803048.

[4]

Jain A, Wang YG, Shi LN. Recent developments in BaTiO3 based lead-free materials for energy storage applications. J Alloys Compd 2022, 928: 167066.

[5]

Winter M, Brodd RJ. What are batteries, fuel cells, and supercapacitors. Chem Rev 2004, 104: 4245–4270.

[6]

Zhao PY, Cai ZM, Wu LW, et al. Perspectives and challenges for lead-free energy-storage multilayer ceramic capacitors. J Adv Ceram 2021, 10: 1153–1193.

[7]

Xu R, Feng YJ, Wei XY, et al. Analysis on nonlinearity of antiferroelectric multilayer ceramic capacitor (MLCC) for energy storage. IEEE T Dielect El In 2019, 26: 2005–2011.

[8]

Ogihara H, Randall CA, Trolier-McKinstry S. High-energy density capacitors utilizing 0.7BaTiO3–0.3BiScO3 ceramics. J Am Ceram Soc 2009, 92: 1719–1724.

[9]

Chu SY, Chen CH. Effects of dopants on the piezoelectric and dielectric properties of Sm-modified PbTiO3 ceramics. Mater Res Bull 2000, 35: 2317–2324.

[10]

Hao XH, Zhai JW, Kong LB, et al. A comprehensive review on the progress of lead zirconate-based antiferroelectric materials. Prog Mater Sci 2014, 63: 1–57.

[11]

Yin C, Zhang TD, Shi ZZ, et al. Tunable polarization-drived high energy storage performances in flexible PbZrO3 films by growing Al2O3 nanolayers. J Adv Ceram 2023, 12: 2123–2133.

[12]

Tsakalakos L, Sands T. Epitaxial ferroelectric (Pb, La)(Zr,Ti)O3 thin films on stainless steel by excimer laser liftoff. Appl Phys Lett 2000, 76: 227–229.

[13]

Park SE, Shrout TR. Ultrahigh strain and piezoelectric behavior in relaxor based ferroelectric single crystals. J Appl Phys 1997, 82: 1804–1811.

[14]

Kim J, Saremi S, Acharya M, et al. Ultrahigh capacitive energy density in ion-bombarded relaxor ferroelectric films. Science 2020, 369: 81–84.

[15]

Jiang SL, Zhang L, Zhang GZ, et al. Effect of Zr:Sn ratio in the lead lanthanum zirconate stannate titanate anti-ferroelectric ceramics on energy storage properties. Ceram Int 2013, 39: 5571–5575.

[16]

Jiang BB, Iocozzia J, Zhao L, et al. Barium titanate at the nanoscale: Controlled synthesis and dielectric and ferroelectric properties. Chem Soc Rev 2019, 48: 1194–1228.

[17]

Freitas VF, Dias GS, Protzek OA, et al. Structural phase relations in perovskite-structured BiFeO3-based multiferroic compounds. J Adv Ceram 2013, 2: 103–111.

[18]

Liu Y, Ji Y, Yang Y. Growth, properties and applications of Bi0.5Na0.5TiO3 ferroelectric nanomaterials. Nanomaterials 2021, 11: 1724.

[19]

Liu Z, Lu T, Ye JM, et al. Antiferroelectrics for energy storage applications: A review. Adv Mater Technol 2018, 3: 1800111.

[20]

Yang Y, Dou ZM, Zou KL, et al. Regulating local electric field to optimize the energy storage performance of antiferroelectric ceramics via a composite strategy. J Adv Ceram 2023, 12: 598–611.

[21]

Fan XH, Wang J, Yuan H, et al. Multi-scale synergic optimization strategy for dielectric energy storage ceramics. J Adv Ceram 2023, 12: 649–680.

[22]

Chen IW, Wang XH. Sintering dense nanocrystalline ceramics without final-stage grain growth. Nature 2000, 404: 168–171.

[23]

Pan H, Li F, Liu Y, et al. Ultrahigh–energy density lead-free dielectric films via polymorphic nanodomain design. Science 2019, 365: 578–582.

[24]
Tan Q, Cao Y, Irwin P. DC Breakdown in polyetherimide composites and implication for structural engineering. In: proceeding of the IEEE International Conference on Solid Dielectrics. Winchester, UK, 2007: 411–414.
[25]

Gerson R, Marshall TC. Dielectric breakdown of porous ceramics. J Appl Phys 1959, 30: 1650–1653.

[26]

Lee HY, Cho KH, Nam HD. Grain size and temperature dependence of electrical breakdown in BaTiO3 ceramic. Ferroelectrics 2006, 334: 165–169.

[27]

Zhang L, Hao H, Liu HX, et al. Effect of HfO2 addition as intergranular grains on the energy storage behavior of Ca0.6Sr0.4TiO3 ceramics. J Eur Ceram Soc 2016, 36: 3157–3163.

[28]
Furman E, Cross LE. Dielectric breakdown in PLZT 9.5/65/35 ceramics. In: Proceedings of the IEEE International Symposium on Applications of Ferroelectrics, USA, 1994: 577–580.
[29]

Huang JJ, Zhang Y, Ma T, et al. Correlation between dielectric breakdown strength and interface polarization in barium strontium titanate glass ceramics. Appl Phys Lett 2010, 96: 042902.

[30]

Qi X, Zheng Z, Boggs S. Engineering with nonlinear dielectrics. IEEE Electr Insul Mag 2004, 20: 27–34.

[31]

Yang LT, Kong X, Li F, et al. Perovskite lead-free dielectrics for energy storage applications. Prog Mater Sci 2019, 102: 72–108.

[32]

Yu CY, Zeng Y, Yang B, et al. Titanium dioxide engineered for near-dispersionless high terahertz permittivity and ultra-low-loss. Sci Rep 2017, 7: 6639.

[33]

Zhou HY, Liu XQ, Zhu XL, et al. CaTiO3 linear dielectric ceramics with greatly enhanced dielectric strength and energy storage density. J Am Ceram Soc 2018, 101: 1999–2008.

[34]

Pan H, Ma J, Ma J, et al. Giant energy density and high efficiency achieved in bismuth ferrite-based film capacitors via domain engineering. Nat Commun 2018, 9: 1813.

[35]

Liu ZY, Fan HQ, Lei SH, et al. Duplex structure in K0.5Na0.5NbO3–SrZrO3 ceramics with temperature-stable dielectric properties. J Eur Ceram Soc 2017, 37: 115–122.

[36]

Sun ZX, Ma CR, Liu M, et al. Ultrahigh energy storage performance of lead-free oxide multilayer film capacitors via interface engineering. Adv Mater 2017, 29: 1604427.

[37]

Chu YH. The superparaelectric battery. Science 2021, 374: 33–34.

[38]

Pan H, Lan S, Xu SQ, et al. Ultrahigh energy storage in superparaelectric relaxor ferroelectrics. Science 2021, 374: 100–104.

[39]

Zhao MY, Wang J, Zhang J, et al. Ultrahigh energy storage performance realized in AgNbO3-based antiferroelectric materials via multiscale engineering. J Adv Ceram 2023, 12: 1166–1177.

[40]

Dong XY, Li X, Chen HY, et al. Realizing enhanced energy storage and hardness performances in 0.90NaNbO3–0.10Bi(Zn0.5Sn0.5)O3 ceramics. J Adv Ceram 2022, 11: 729–741.

[41]

Qi H, Zuo RZ. Linear-like lead-free relaxor antiferroelectric (Bi0.5Na0.5)TiO3–NaNbO3 with giant energy-storage density/efficiency and super stability against temperature and frequency. J Mater Chem A 2019, 7: 3971–3978.

[42]

Lv ZQ, Lu T, Liu Z, et al. NaNbO3-based multilayer ceramic capacitors with ultrahigh energy storage performance. Adv Energy Mater 2024, 14: 2304291.

[43]

Wang SM, Yan F, Qian J, et al. Temperature stability lock of high-performance lead-free relaxor ferroelectric ceramics. Energy Storage Mater 2024, 66: 103155.

[44]

Shen ZB, Wang XH, Luo BC, et al. BaTiO3–BiYbO3 perovskite materials for energy storage applications. J Mater Chem A 2015, 3: 18146–18153.

[45]

Li CY, Liu JK, Bai WF, et al. Superior energy storage performance in (Bi0.5Na0.5)TiO3-based lead-free relaxor ferroelectrics for dielectric capacitor application via multiscale optimization design. J Mater Chem A 2022, 10: 9535–9546.

[46]

Zhang FD, Qiao XS, Shi QQ, et al. High energy storage density realized in Bi0.5Na0.5TiO3-based relaxor ferroelectric ceramics at ultralow sintering temperature. J Eur Ceram Soc 2021, 41: 368–375.

[47]

Smolensky GA, Isupov VA, Agranovskaya AI, et al. New materials of AIIBIVOVI type. Trans Sov Phys Solid State 1961, 2: 2651–2654.

[48]

Jones GO, Thomas PA. Investigation of the structure and phase transitions in the novel A-site substituted distorted perovskite compound Na0.5Bi0.5TiO3. Acta Crystallogr Sect B 2002, 58: 168–178.

[49]

Li DX, Zeng XJ, Li ZP, et al. Progress and perspectives in dielectric energy storage ceramics. J Adv Ceram 2021, 10: 675–703.

[50]

Cui CW, Pu YP, Gao ZY, et al. Structure, dielectric and relaxor properties in lead-free ST–NBT ceramics for high energy storage applications. J Alloys Compd 2017, 711: 319–326.

[51]

Cao WP, Li WL, Dai XF, et al. Large electrocaloric response and high energy-storage properties over a broad temperature range in lead-free NBT–ST ceramics. J Eur Ceram Soc 2016, 36: 593–600.

[52]

Jayakrishnan AR, Silva JPB, Kamakshi K, et al. Are lead-free relaxor ferroelectric materials the most promising candidates for energy storage capacitors. Prog Mater Sci 2023, 132: 101046.

[53]

Yan F, Yang HB, Lin Y, et al. Dielectric and ferroelectric properties of SrTiO3–Bi0.5Na0.5TiO3–BaAl0.5Nb0.5O3 lead-free ceramics for high-energy-storage applications. Inorg Chem 2017, 56: 13510–13516.

[54]

Zhang LY, Wang ZY, Li Y, et al. Enhanced energy storage performance in Sn doped Sr0.6(Na0.5Bi0.5)0.4TiO3 lead-free relaxor ferroelectric ceramics. J Eur Ceram Soc 2019, 39: 3057–3063.

[55]

Yang HB, Yan F, Lin Y, et al. Enhanced recoverable energy storage density and high efficiency of SrTiO3-based lead-free ceramics. Appl Phys Lett 2017, 111: 253903.

[56]

Yang HB, Yan F, Lin Y, et al. Improvement of dielectric and energy storage properties in SrTiO3-based lead-free ceramics. J Alloys Compd 2017, 728: 780–787.

[57]

Wang B, Pu YP, Yuan QB, et al. Improvements of microstructures and energy storage properties of Sr0.8(Na0.5Bi0.5)0.2TiO3 ceramics via microwave sintering. J Mater Sci Mater El 2019, 30: 12950–12955.

[58]

Huang WH, Thatikonda SK, Ke YF, et al. High-recoverable energy-storage density and dielectric tunability in Eu3+-doped NBT– xSTO binary solid solution films. J Am Ceram Soc 2020, 103: 999–1009.

[59]

Yan F, Huang KW, Jiang T, et al. Significantly enhanced energy storage density and efficiency of BNT-based perovskite ceramics via A-site defect engineering. Energy Storage Mater 2020, 30: 392–400.

[60]

Zhu XP, Shi P, Gao YF, et al. Enhanced energy storage performance of 0.88(0.65Bi0.5Na0.5TiO3–0.35SrTiO3)–0.12Bi(Mg0.5Hf0.5)O3 lead-free relaxor ceramic by composition design strategy. Chem Eng J 2022, 437: 135462.

[61]

Zhao WC, Xu DM, Li D, et al. Broad-high operating temperature range and enhanced energy storage performances in lead-free ferroelectrics. Nat Commun 2023, 14: 5725.

[62]

Li D, Xu DM, Zhao WC, et al. A high-temperature performing and near-zero energy loss lead-free ceramic capacitor. Energy Environ Sci 2023, 16: 4511–4521.

[63]

Wang YY, Liu HB, Yan TN, et al. Microstructure and electrical properties of Nb-doped SrTiO3–BiFeO3 based lead-free ceramics. J Am Ceram Soc 2022, 105: 2020–2028.

[64]

Lu ZL, Wang G, Bao WC, et al. Superior energy density through tailored dopant strategies in multilayer ceramic capacitors. Energy Environ Sci 2020, 13: 2938–2948.

[65]

Makarovic M, Bencan A, Walker J, et al. Processing, piezoelectric and ferroelectric properties of ( x)BiFeO3–(1− x)SrTiO3 ceramics. J Eur Ceram Soc 2019, 39: 3693–3702.

[66]

Diao CL, Liu HX, Lou GH, et al. Structure and electric properties of sandwich-structured SrTiO3/BiFeO3 thin films for energy storage applications. J Alloys Compd 2019, 781: 378–384.

[67]

Cho S, Yun C, Kim YS, et al. Strongly enhanced dielectric and energy storage properties in lead-free perovskite titanate thin films by alloying. Nano Energy 2018, 45: 398–406.

[68]

Correia TM, McMillen M, Rokosz MK, et al. A lead-free and high-energy density ceramic for energy storage applications. J Am Ceram Soc 2013, 96: 2699–2702.

[69]

Correia T, Stewart M, Ellmore A, et al. Lead-free ceramics with high energy density and reduced losses for high temperature applications. Adv Eng Mater 2017, 19: 1700019.

[70]

McMillen M, Douglas AM, Correia TM, et al. Increasing recoverable energy storage in electroceramic capacitors using “dead-layer” engineering. Appl Phys Lett 2012, 101: 242909.

[71]

Pan H, Zeng Y, Shen Y, et al. BiFeO3–SrTiO3 thin film as a new lead-free relaxor-ferroelectric capacitor with ultrahigh energy storage performance. J Mater Chem A 2017, 5: 5920–5926.

[72]

Yan F, Bai HR, Ge GL, et al. Composition and structure optimized BiFeO3–SrTiO3 lead-free ceramics with ultrahigh energy storage performance. Small 2022, 18: 2106515.

[73]

Liu YQ, Liu JF, Pan H, et al. Phase-field simulations of tunable polar topologies in lead-free ferroelectric/paraelectric multilayers with ultrahigh energy-storage performance. Adv Mater 2022, 34: 2108772.

[74]

Yang ZT, Du HL, Jin L, et al. High-performance lead-free bulk ceramics for electrical energy storage applications: Design strategies and challenges. J Mater Chem A 2021, 9: 18026–18085.

[75]
Chen CT, Wang L, Liu XM, et al. K0.5Na0.5NbO3–SrTiO3/PVDF polymer composite film with low remnant polarization and high discharge energy storage density. Polymers 2019, 11 : 310.
[76]

Kosec M, Bobnar V, Hrovat M, et al. New lead-free relaxors based on the K0.5Na0.5NbO3–SrTiO3 solid solution. J Mater Res 2004, 19: 1849–1854.

[77]

Yang ZT, Du HL, Qu SB, et al. Significantly enhanced recoverable energy storage density in potassium–sodium niobate-based lead free ceramics. J Mater Chem A 2016, 4: 13778–13785.

[78]

Koruza J, Rožič B, Cordoyiannis G, et al. Large electrocaloric effect in lead-free K0.5Na0.5NbO3–SrTiO3 ceramics. Appl Phys Lett 2015, 106: 202905.

[79]

Liu ZY, Fan HQ, Zhao YW, et al. Optical and tunable dielectric properties of K0.5Na0.5NbO3–SrTiO3 ceramics. J Am Ceram Soc 2016, 99: 146–151.

[80]

Ren XD, Jin L, Peng ZH, et al. Regulation of energy density and efficiency in transparent ceramics by grain refinement. Chem Eng J 2020, 390: 124566.

[81]

Hui KZ, Chen LL, Cen ZY, et al. KNN based high dielectric constant X9R ceramics with fine grain structure and energy storage ability. J Am Ceram Soc 2021, 104: 5815–5825.

[82]

Kumar R, Singh S. Enhanced electrocaloric response and high energy-storage properties in lead-free (1− x)(K0.5Na0.5)NbO3 xSrZrO3 nanocrystalline ceramics. J Alloys Compd 2018, 764: 289–294.

[83]

Chai QZ, Zhang FD, Zhou QY, et al. Superior energy storage properties and optical transparency achieved in K0.5Na0.5NbO3-based dielectric ceramics via multiple synergistic strategy. Small 2023, 19: 2207464.

[84]

Qu BY, Du HL, Yang ZT. Lead-free relaxor ferroelectric ceramics with high optical transparency and energy storage ability. J Mater Chem C 2016, 4: 1795–1803.

[85]

Qu BY, Du HL, Yang ZT, et al. Enhanced dielectric breakdown strength and energy storage density in lead-free relaxor ferroelectric ceramics prepared using transition liquid phase sintering. RSC Adv 2016, 6: 34381–34389.

[86]

Dai ZH, Li DY, Zhou ZJ, et al. A strategy for high performance of energy storage and transparency in KNN-based ferroelectric ceramics. Chem Eng J 2022, 427: 131959.

[87]

Schileo G, Feteira A, Reichmann K, et al. Structure–property relationships in (1− x)BaTiO3 xBiGdO3 ceramics. J Eur Ceram Soc 2015, 35: 2479–2488.

[88]

Dong GX, Ma SW, Du J, et al. Dielectric properties and energy storage density in ZnO-doped Ba0.3Sr0.7TiO3 ceramics. Ceram Int 2009, 35: 2069–2075.

[89]
Wang Y, Shen ZY, Li YM, et al. Optimization of energy storage density and efficiency in Ba xSr1− xTiO3 (x ≤ 0.4) paraelectric ceramics. Ceram Int 2015, 41 : 8252–8256.
[90]

Yuan QB, Chen M, Zhan SL, et al. Ceramic-based dielectrics for electrostatic energy storage applications: Fundamental aspects, recent progress, and remaining challenges. Chem Eng J 2022, 446: 136315.

[91]

Song Z, Liu HX, Zhang SJ, et al. Effect of grain size on the energy storage properties of (Ba0.4Sr0.6)TiO3 paraelectric ceramics. J Eur Ceram Soc 2014, 34: 1209–1217.

[92]

Song Z, Zhang SJ, Liu HX, et al. Improved energy storage properties accompanied by enhanced interface polarization in annealed microwave-sintered BST. J Am Ceram Soc 2015, 98: 3212–3222.

[93]

Wu YJ, Huang YH, Wang N, et al. Effects of phase constitution and microstructure on energy storage properties of barium strontium titanate ceramics. J Eur Ceram Soc 2017, 37: 2099–2104.

[94]

Huang YH, Wu YJ, Qiu WJ, et al. Enhanced energy storage density of Ba0.4Sr0.6TiO3–MgO composite prepared by spark plasma sintering. J Eur Ceram Soc 2015, 35: 1469–1476.

[95]

Lv F, Jiang XC, Zhou LM, et al. Enhanced energy storage performance and theoretical understanding of the dielectric breakdown behavior for Ba0.4Sr0.6TiO3/Al2O3 ceramics. J Alloys Compd 2022, 923: 166344.

[96]

Liu BB, Wang XH, Zhang RX, et al. Energy storage properties of ultra fine-grained Ba0.4Sr0.6TiO3-based ceramics sintered at low temperature. J Alloys Compd 2017, 691: 619–623.

[97]

Jin Q, Pu YP, Wang C, et al. Enhanced energy storage performance of Ba0.4Sr0.6TiO3 ceramics: Influence of sintering atmosphere. Ceram Int 2017, 43: S232–S238.

[98]

Kang DS, Han MS, Lee SG, et al. Dielectric and pyroelectric properties of barium strontium calcium titanate ceramics. J Eur Ceram Soc 2003, 23: 515–518.

[99]

Yan Y, Wu QK, Yang Y, et al. Microstructure, dielectric, ferroelectric and energy storage properties of SnO2 doped Ba0.5Sr0.5TiO3 ceramics. Ferroelectrics 2017, 520: 171–176.

[100]

Yang WJ, Huang FZ, Shu LH, et al. Enhanced recoverable energy storage density and efficiency in (1– x)Ba0.85Ca0.15Zr0.1Ti0.9O3 xSrTiO3–MnO2 lead-free ceramics. J Mater Chem C 2022, 10: 3876–3885.

[101]

Lu X, Tong Y, Talebinezhad H, et al. Dielectric and energy-storage performance of Ba0.5Sr0.5TiO3–SiO2 ceramic-glass composites. J Alloys Compd 2018, 745: 127–134.

[102]

Wu LW, Wang XH, Gong HL, et al. Core-satellite BaTiO3@SrTiO3 assemblies for a local compositionally graded relaxor ferroelectric capacitor with enhanced energy storage density and high energy efficiency. J Mater Chem C 2015, 3: 750–758.

[103]

Wang HY, Cao MH, Liu M, et al. Enhanced energy storage properties of fine-crystalline Ba0.4Sr0.6TiO3 ceramics by coating powders with B2O3–Al2O3–SiO2. J Alloys Compd 2020, 826: 153891.

[104]

Wang T, Jin L, Shu LL, et al. Energy storage properties in Ba0.4Sr0.6TiO3 ceramics with addition of semi-conductive BaO–B2O3–SiO2–Na2CO3–K2CO3 glass. J Alloys Compd 2014, 617: 399–403.

[105]

Zhang WQ, Xue SX, Liu SH, et al. Structure and dielectric properties of Ba x Sr1− x TiO3-based glass ceramics for energy storage. J Alloys Compd 2014, 617: 740–745.

[106]

Yang HB, Yan F, Lin Y, et al. Enhanced energy storage properties of Ba0.4Sr0.6TiO3 lead-free ceramics with Bi2O3–B2O3–SiO2 glass addition. J Eur Ceram Soc 2018, 38: 1367–1373.

[107]

Huang W, Chen Y, Li X, et al. Ultrahigh recoverable energy storage density and efficiency in barium strontium titanate-based lead-free relaxor ferroelectric ceramics. Appl Phys Lett 2018, 113: 203902.

[108]
Liu G, Li Y, Wang ZY, et al. Dielectric, ferroelectric and energy storage properties of lead-free (1−x)Ba0.9Sr0.1TiO3− xBi(Zn0.5Zr0.5)O3 ferroelectric ceramics sintered at lower temperature. Ceram Int 2019, 45 : 15556–15565.
[109]

Fan YZ, Zhou ZY, Chen Y, et al. A novel lead-free and high-performance barium strontium titanate-based thin film capacitor with ultrahigh energy storage density and giant power density. J Mater Chem C 2020, 8: 50–57.

[110]

Liu XC, Yuan Y, Cao L, et al. Enhanced energy storage properties with excellent stability in BST–BLZS relaxor ceramics. Ceram Int 2022, 48: 19382–19391.

[111]

Huang W, Chen Y, Li X, et al. Superior energy storage performances achieved in (Ba,Sr)TiO3-based bulk ceramics through composition design and core–shell structure engineering. Chem Eng J 2022, 444: 135523.

[112]

Chao S, Dogan F. BaTiO3–SrTiO3 layered dielectrics for energy storage. Mater Lett 2011, 65: 978–981.

[113]

Zhou J, Liu HX, Hao H, et al. The microstructure and energy storage properties of Ba0.3Sr0.7TiO3 crystallite thin films. J Alloys Compd 2019, 792: 1013–1020.

[114]

Wang Y, Liu XF, Sun HJ, et al. Enhanced recoverable energy storage density of barium strontium titanate-based thin films with compositionally graded structure. J Mater Sci Mater El 2021, 32: 2193–2199.

[115]

Su YH, Huan Y, Peng B, et al. Energy storage properties of flexible dielectric composites containing Ba0.4Sr0.6TiO3/MnO2 heterostructures. Chem Eng J 2023, 452: 139316.

[116]

Song Z, Liu HX, Lanagan MT, et al. Thermal annealing effects on the energy storage properties of BST ceramics. J Am Ceram Soc 2017, 100: 3550–3557.

[117]

Sun Z, Zhang J, Luo HJ, et al. Superior capacitive energy-storage performance in Pb-free relaxors with a simple chemical composition. J Am Chem Soc 2023, 145: 6194–6202.

[118]

Chen J, Zhou Y, Huang XY, et al. Ladderphane copolymers for high-temperature capacitive energy storage. Nature 2023, 615: 62–66.

[119]

Chu BJ, Zhou X, Ren KL, et al. A dielectric polymer with high electric energy density and fast discharge speed. Science 2006, 313: 334–336.

[120]

Zhou CR, Yang HB, Zhou Q, et al. Dielectric, ferroelectric and piezoelectric properties of La-substituted BiFeO3–BaTiO3 ceramics. Ceram Int 2013, 39: 4307–4311.

[121]

Meng K, Li WH, Tang XG, et al. A review of a good binary ferroelectric ceramic: BaTiO3–BiFeO3. ACS Appl Electron Mater 2022, 4: 2109–2145.

[122]

Xue MP, Tang YC, Shan ZH, et al. Deciphering the leakage conduction mechanism of BiFeO3–BaTiO3 lead-free piezoelectric ceramics. J Adv Ceram 2023, 12: 1844–1856.

[123]

Kursumovic A, Li WW, Cho S, et al. Lead-free relaxor thin films with huge energy density and low loss for high temperature applications. Nano Energy 2020, 71: 104536.

[124]

Wang DW, Fan ZM, Zhou D, et al. Bismuth ferrite-based lead-free ceramics and multilayers with high recoverable energy density. J Mater Chem A 2018, 6: 4133–4144.

[125]

Chen ZT, Bai XZ, Wang HL, et al. Achieving high-energy storage performance in 0.67Bi1− x Sm x FeO3–0.33BaTiO3 lead-free relaxor ferroelectric ceramics. Ceram Int 2020, 46: 11549–11555.

[126]

Bai H, Li J, Hong Y, et al. Enhanced ferroelectricity and magnetism of quenched (1− x)BiFeO3− x BaTiO3 ceramics. J Adv Ceram 2020, 9: 511–516.

[127]

Wang G, Li JL, Zhang X, et al. Ultrahigh energy storage density lead-free multilayers by controlled electrical homogeneity. Energ Environ Sci 2019, 12: 582–588.

[128]

Zheng DG, Zuo RZ. Enhanced energy storage properties in La(Mg1/2Ti1/2)O3-modified BiFeO3–BaTiO3 lead-free relaxor ferroelectric ceramics within a wide temperature range. J Eur Ceram Soc 2017, 37: 413–418.

[129]

Bai XZ, Chen ZT, Zheng P, et al. High recoverable energy storage density in nominal (0.67− x)BiFeO3–0.33BaTiO3− x BaBi2Nb2O9 lead-free composite ceramics. Ceram Int 2021, 47: 23116–23123.

[130]

Liu ZX, Wang CG, Zhang XB, et al. Ultrahigh polarization response along large energy storage properties in BiFeO3–BaTiO3-based relaxor ferroelectric ceramics under low electric field. ACS Appl Mater Interfaces 2022, 14: 53690–53701.

[131]

Zheng DG, Zuo RZ, Zhang DS, et al. Novel BiFeO3–BaTiO3–Ba(Mg1/3Nb2/3)O3 lead-free relaxor ferroelectric ceramics for energy-storage capacitors. J Am Ceram Soc 2015, 98: 2692–2695.

[132]

Wang DW, Fan ZM, Li WB, et al. High energy storage density and large strain in Bi(Zn2/3Nb1/3)O3-doped BiFeO3–BaTiO3 ceramics. ACS Appl Energy Mater 2018, 1: 4403–4412.

[133]

Sun HN, Wang XJ, Sun QZ, et al. Large energy storage density in BiFeO3–BaTiO3–AgNbO3 lead-free relaxor ceramics. J Eur Ceram Soc 2020, 40: 2929–2935.

[134]

Chen ZT, Bu XY, Ruan BX, et al. Simultaneously achieving high energy storage density and efficiency under low electric field in BiFeO3-based lead-free relaxor ferroelectric ceramics. J Eur Ceram Soc 2020, 40: 5450–5457.

[135]

Liu NT, Liang RH, Zhao XB, et al. Novel bismuth ferrite-based lead-free ceramics with high energy and power density. J Am Ceram Soc 2018, 101: 3259–3265.

[136]

Liu NT, Liang RH, Zhou ZY, et al. Designing lead-free bismuth ferrite-based ceramics learning from relaxor ferroelectric behavior for simultaneous high energy density and efficiency under low electric field. J Mater Chem C 2018, 6: 10211–10217.

[137]

Wang G, Lu ZL, Yang HJ, et al. Fatigue resistant lead-free multilayer ceramic capacitors with ultrahigh energy density. J Mater Chem A 2020, 8: 11414–11423.

[138]

Wang G, Lu ZL, Li JL, et al. Lead-free (Ba,Sr)TiO3–BiFeO3 based multilayer ceramic capacitors with high energy density. J Eur Ceram Soc 2020, 40: 1779–1783.

[139]

Tang MY, Yu LJ, Wang YF, et al. Dielectric, ferroelectric, and energy storage properties of Ba(Zn1/3Nb2/3)O3-modfied BiFeO3–BaTiO3 Pb-free relaxor ferroelectric ceramics. Ceram Int 2021, 47: 3780–3788.

[140]

Kang F, Zhang LX, Yang WJ, et al. Achieving ultrahigh energy storage performance in BiFeO3–BaTiO3 based lead free relaxors via a composition optimization strategy. J Eur Ceram Soc 2022, 42: 6958–6967.

[141]

Yu Z, Zeng JT, Zheng LY, et al. Microstructure effects on the energy storage density in BiFeO3-based ferroelectric ceramics. Ceram Int 2021, 47: 12735–12741.

[142]

Yan F, Shi YJ, Zhou XF, et al. Optimization of polarization and electric field of bismuth ferrite-based ceramics for capacitor applications. Chem Eng J 2021, 417: 127945.

[143]

Liu G, Tang MY, Hou X, et al. Energy storage properties of bismuth ferrite based ternary relaxor ferroelectric ceramics through a viscous polymer process. Chem Eng J 2021, 412: 127555.

[144]

Kumar MM, Srinivas A, Suryanarayana SV. Structure property relations in BiFeO3/BaTiO3 solid solutions. J Appl Phys 2000, 87: 855–862.

[145]

Rawat M, Yadav KL. Study of structural, electrical, magnetic and optical properties of 0.65BaTiO3–0.35Bi0.5Na0.5TiO3–BiFeO3 multiferroic composite. J Alloys Compd 2014, 597: 188–199.

[146]

Li Q, Wang J, Ma Y, et al. Enhanced energy-storage performance and dielectric characterization of 0.94Bi0.5Na0.5TiO3–0.06BaTiO3 modified by CaZrO3. J Alloys Compd 2016, 663: 701–707.

[147]

Wu SH, Song BJ, Li P, et al. Revealing the relationship between morphotropic phase boundary and tolerance factor of Bi0.5Na0.5TiO3-based thin films. J Eur Ceram Soc 2020, 40: 2954–2963.

[148]

Xu Q, Xie J, He ZC, et al. Energy-storage properties of Bi0.5Na0.5TiO3–BaTiO3–KNbO3 ceramics fabricated by wet-chemical method. J Eur Ceram Soc 2017, 37: 99–106.

[149]

Lewczuk U, Suchanicz J, Karpierz M, et al. Dielectric and ferroelectric properties of NBT–BT systems. Phase Transit 2017, 90: 60–64.

[150]

Ma JP, Chen XM, Lian HL, et al. Microstructure, dielectric, piezoelectric, and ferroelectric properties of fine-grained 0.94Na0.5Bi0.5TiO3–0.06BaTiO3 ceramics. J Eur Ceram Soc 2019, 39: 264–268.

[151]

Jain A, Wang YG, Guo H, et al. Grain size engineered Ba0.9Sr0.1Ti0.9Hf0.1O3–Na0.5Bi0.5TiO3 relaxor ceramics with improved energy storage performance. J Am Ceram Soc 2020, 103: 6308–6318.

[152]

Chen LL, Wang HX, Zhao PY, et al. High permittivity and excellent high-temperature energy storage properties of X9R BaTiO3–(Bi0.5Na0.5)TiO3 ceramics. J Am Ceram Soc 2020, 103: 1113–1120.

[153]

Xu Q, Liu HX, Song Z, et al. A new energy-storage ceramic system based on Bi0.5Na0.5TiO3 ternary solid solution. J Mater Sci Mater El 2016, 27: 322–329.

[154]

Liu X, Du HL, Liu XC, et al. Energy storage properties of BiTi0.5Zn0.5O3–Bi0.5Na0.5TiO3–BaTiO3 relaxor ferroelectrics. Ceram Int 2016, 42: 17876–17879.

[155]

Jia WX, Hou YD, Zheng MP, et al. High-temperature dielectrics based on (1− x)(0.94Bi0.5Na0.5TiO3–0.06BaTiO3)– xNaNbO3 system. J Alloys Compd 2017, 724: 306–315.

[156]

Yang HB, Yan F, Lin Y, et al. Lead-free BaTiO3–Bi0.5Na0.5TiO3–Na0.73Bi0.09NbO3 relaxor ferroelectric ceramics for high energy storage. J Eur Ceram Soc 2017, 37: 3303–3311.

[157]

Höfling M, Steiner S, Hoang AP, et al. Optimizing the defect chemistry of Na1/2Bi1/2TiO3-based materials: Paving the way for excellent high temperature capacitors. J Mater Chem C 2018, 6: 4769–4776.

[158]

Liu XY, Yang HB, Yan F, et al. Enhanced energy storage properties of BaTiO3–Bi0.5Na0.5TiO3 lead-free ceramics modified by SrY0.5Nb0.5O3. J Alloys Compd 2019, 778: 97–104.

[159]

Zhang YM, Liang GC, Tang SL, et al. Phase-transition induced optimization of electrostrain, electrocaloric refrigeration and energy storage of LiNbO3 doped BNT–BT ceramics. Ceram Int 2020, 46: 1343–1351.

[160]

Bai WF, Zhao XY, Ding YQ, et al. Giant field-induced strain with low hysteresis and boosted energy storage performance under low electric field in (Bi0.5Na0.5)TiO3-based grain orientation-controlled ceramics. Adv Electron Mater 2020, 6: 2000332.

[161]

Chen YH, Qi YX, Zhao DE, et al. High energy storage density and efficiency in (Bi0.5Na0.5)0.94Ba0.06TiO3-based ceramics with broadened and flattened dielectric peaks. Ceram Int 2022, 48: 30066–30077.

[162]

Liang GC, Zhang YM, Zhu JN, et al. Tailoring and improving the strong-electric-field electrical properties of the BNT–BT ferroelectric ceramics by a functional-group-doping. Ceram Int 2021, 47: 6584–6590.

[163]

Wang T, Liu JQ, Kong L, et al. Evolution of the structure, dielectric and ferroelectric properties of Na0.5Bi0.5TiO3-added BaTiO3–Bi(Mg2/3Nb1/3)O3 ceramics. Ceram Int 2020, 46: 25392–25398.

[164]

Wu SH, Xu LX, Zhu K, et al. Improved piezoelectricity and energy storage performance simultaneously achieved in [001]-preferentially oriented Bi0.5Na0.5TiO3–BaTiO3–BiMnO3 thin films grown on Nb-doped SrTiO3 single-crystalline substrates. J Eur Ceram Soc 2021, 41: 2539–2547.

[165]

Cao WJ, Li TY, Chen PF, et al. Outstanding energy storage performance of Na0.5Bi0.5TiO3–BaTiO3–(Sr0.85Bi0.1)(Mg1/3Nb2/3)O3 lead-free ceramics. ACS Appl Energy Mater 2021, 4: 9362–9367.

[166]

Hou Y, Li JC, Zheng ZG, et al. Rational co-doping of SrZrO3 and BaTiO3 in Bi0.5Na0.5TiO3 for extraordinary energy storage and electrocaloric performances. ACS Appl Energy Mater 2022, 5: 3477–3488.

[167]

Wan YH, Hou NJ, Ren PR, et al. High-temperature dielectric and energy storage properties of Bi0.5Na0.5TiO3-based ceramics modified by Sr0.8Na0.4Nb2O6. J Am Ceram Soc 2021, 104: 5138–5147.

[168]

Zhou SY, Pu YP, Zhang XQ, et al. High energy density, temperature stable lead-free ceramics by introducing high entropy perovskite oxide. Chem Eng J 2022, 427: 131684.

[169]

Li D, Zhou D, Wang D, et al. Lead-free relaxor ferroelectric ceramics with ultrahigh energy storage densities via polymorphic polar nanoregions design. Small 2023, 19: e2206958.

[170]

Li TY, Jiang XW, Li J, et al. Ultrahigh energy-storage performances in lead-free Na0.5Bi0.5TiO3-based relaxor antiferroelectric ceramics through a synergistic design strategy. ACS Appl Mater Inter 2022, 14: 22263–22269.

[171]

Qin WJ, Zhao M, Li ZM, et al. High energy storage and thermal stability under low electric field in Bi0.5Na0.5TiO3-modified BaTiO3–Bi(Zn0.25Ta0.5)O3 ceramics. Chem Eng J 2022, 443: 136505.

[172]

Yan YX, Qin WJ, Wang XY, et al. Enhanced energy storage in temperature stable Bi0.5Na0.5TiO3-modified BaTiO3–Bi(Zn2/3Nb1/3)O3 ceramics. Ceram Int 2022, 48: 36478–36489.

[173]

Zhao HY, Cao WJ, Liang C, et al. High energy-storage performance in X9R-type Na0.5Bi0.5TiO3-based lead-free ceramics. Ceram Int 2023, 49: 15939–15946.

[174]

Chen XQ, Wang MK, Pan ZB, et al. Ultrahigh energy density and efficiency of BaTiO3-based ceramics via multiple design strategies. Chem Eng J 2023, 467: 143395.

[175]

Wang C, Lou XJ. High energy storage properties of 0.94Bi0.5Na0.5TiO3–0.06BaTiO3 ceramics by incorporating Sr0.8Bi0.1γ0.1Ti0.8Zr0.2O2.95. Microstructures 2023, 3: 2023023.

[176]

Xu Q, Lanagan MT, Luo W, et al. Electrical properties and relaxation behavior of Bi0.5Na0.5TiO3–BaTiO3 ceramics modified with NaNbO3. J Eur Ceram Soc 2016, 36: 2469–2477.

[177]

Liu Q, Hao H, Liu Z, et al. Dielectric-temperature stability and breakdown strength of the Nb-doped 0.12BiAlO3–0.88BaTiO3 ceramics with B–Al–Si glass additive. Ceram Int 2021, 47: 7135–7142.

[178]

Yang Y, Ji YC, Fang MX, et al. Morphotropic relaxor boundary in a relaxor system showing enhancement of electrostrain and dielectric permittivity. Phys Rev Lett 2019, 123: 137601.

[179]

Singh Y, Singh S. Enhanced electrocaloric effect and energy storage response in lead-free (1− x)K0.5Na0.5NbO3–xBaTiO3 ferroelectric ceramics. Ceram Int 2022, 48: 27018–27026.

[180]

Jin Q, Zhao LL, Cui B, et al. Enhanced energy storage properties in lead-free BaTiO3@Na0.5K0.5NbO3 nano-ceramics with nanodomains via a core–shell structural design. J Mater Chem C 2020, 8: 5248–5258.

[181]

Jin Q, Song EP, Cai K. Enhanced energy storage performance of lead-free BaTiO3–K0.5Na0.5NbO3 via grain engineering. J Electron Mater 2022, 51: 5188–5204.

[182]

Iacomini A, Garroni S, Mulas G, et al. Processing, phase evolution and electrical properties of “lead free” KNN–BF–CuO eco-piezoceramic from mechanochemically activated precursors. Open Ceram 2022, 9: 100247.

[183]

Iacomini A, Garroni S, Mureddu M, et al. Processing, microstructure, electrical properties and cytotoxic behaviour of lead-free 0.99K0.5Na0.5NbO3–0.01BiFeO3 piezoceramics prepared using spark plasma sintering (SPS). J Solid State Chem 2022, 316: 123589.

[184]

Nuraini U, Fitriana F, Kidkhunthod P, et al. The elucidation of the alteration properties of BiFeO3 doped (K0.5Na0.5)NbO3 through local structure investigation. Physica B 2021, 614: 413012.

[185]
Xu P, Jiang MH, Liu XY. Effects of low concentration BiFeO3 additions on microstructure and piezoelectric properties of (K0.5Na0.5)NbO3 ceramics. Adv Mater Res 2011, 335–336 : 968–975.
[186]

Sun XY, Chen J, Yu RB, et al. BiFeO3-doped (Na0.5K0.5) NbO3 lead-free piezoelectric ceramics. Sci Technol Adv Mat 2008, 9: 025004.

[187]

Zuo RZ, Ye C, Fang XS. Na0.5K0.5NbO3–BiFeO3 lead-free piezoelectric ceramics. J Phys Chem Solids 2008, 69: 230–235.

[188]

Yang ZT, Gao F, Du HL, et al. Grain size engineered lead-free ceramics with both large energy storage density and ultrahigh mechanical properties. Nano Energy 2019, 58: 768–777.

[189]

Zhao PY, Li LT, Wang XH. BaTiO3–NaNbO3 energy storage ceramics with an ultrafast charge-discharge rate and temperature-stable power density. Microstructures 2022, 3: 2022023.

[190]

Yang D, Gao J, Shu L, et al. Lead-free antiferroelectric niobates AgNbO3 and NaNbO3 for energy storage applications. J Mater Chem A 2020, 8: 23724–23737.

[191]

Sarkar SK, Sharma ML. Dielectric strength and dielectric constant of BaTiO3–NaNbO3 composites at room temperature. J Mater Sci Lett 1989, 8: 1365–1367.

[192]

Benlahrache MT, Benhamla N, Achour S. Dielectric properties of BaTiO3–NaNbO3 composites. J Eur Ceram Soc 2004, 24: 1493–1496.

[193]

Zuo RZ, Qi H, Fu J, et al. Giant electrostrictive effects of NaNbO3–BaTiO3 lead-free relaxor ferroelectrics. Appl Phys Lett 2016, 108: 232904.

[194]

Lu X, Hou L, Jin L, et al. Structure evolution and exceptionally ultra-low hysteresis unipolar electric field-induced strain in (1− x)NaNbO3− x BaTiO3 lead-free ferroelectrics. Ceram Int 2018, 44: 5492–5499.

[195]

Yang DD, Wang Y, Wang X, et al. Preparation of BaTiO3/NaNbO3 composite ceramics based on the [101]-oriented NaNbO3 crystals and their dielectric properties. Ceram Int 2023, 49: 7814–7822.

[196]

Xiao WR, Liu Z, Zhang C, et al. Free energy regulation and domain engineering of BaTiO3–NaNbO3 ceramics for superior dielectric energy storage performance. Chem Eng J 2023, 461: 142070.

[197]

De M, Hajra S, Tiwari R, et al. Structural, dielectric and electrical characteristics of BiFeO3–NaNbO3 solid solutions. Ceram Int 2018, 44: 11792–11797.

[198]

Dash S, Padhee R, Das PR, et al. Enhancement of dielectric and electrical properties of NaNbO3-modified BiFeO3. J Mater Sci Mater El 2013, 24: 3315–3323.

[199]

Ummer RP, Sreekanth P, Raneesh B, et al. Electric, magnetic and optical limiting (short pulse and ultrafast) studies in phase pure (1− x)BiFeO3 xNaNbO3 multiferroic nanocomposite synthesized by the pechini method. RSC Adv 2015, 5: 67157–67164.

[200]

Ummer RP, Perumbilavil S, Jose J, et al. Exploring the optical limiting, photocatalytic and antibacterial properties of the BiFeO3–NaNbO3 nanocomposite system. RSC Adv 2021, 11: 8450–8458.

[201]

Saad Y, Álvarez-Serrano I, López ML, et al. Dielectric response and thermistor behavior of lead-free xNaNbO3–(1− x)BiFeO3 electroceramics. Ceram Int 2018, 44: 18560–18570.

[202]

Jiang J, Meng XJ, Li L, et al. Ultrahigh energy storage density in lead-free relaxor antiferroelectric ceramics via domain engineering. Energy Storage Mater 2021, 43: 383–390.

[203]

Li Q, Yao ZJ, Ning L, et al. Enhanced energy-storage properties of (1− x)(0.7Bi0.5Na0.5TiO3–0.3Bi0.2Sr0.7TiO3)– xNaNbO3 lead-free ceramics. Ceram Int 2018, 44: 2782–2788.

[204]

Peng P, Nie HC, Liu Z, et al. Enhanced pyroelectric properties in (Bi0.5Na0.5)TiO3–BiAlO3–NaNbO3 ternary system lead-free ceramics. J Am Ceram Soc 2018, 101: 4044–4052.

[205]

Peng P, Nie HC, Zheng C, et al. High-energy storage density in NaNbO3-modified (Bi0.5Na0.5)TiO3–BiAlO3-based lead-free ceramics under low electric field. J Am Ceram Soc 2021, 104: 2610–2620.

[206]

Wu YC, Fan YZ, Liu NT, et al. Enhanced energy storage properties in sodium bismuth titanate-based ceramics for dielectric capacitor applications. J Mater Chem C 2019, 7: 6222–6230.

[207]

Zhu CQ, Cai ZM, Luo BC, et al. High temperature lead-free BNT-based ceramics with stable energy storage and dielectric properties. J Mater Chem A 2020, 8: 683–692.

[208]

Chen Y, Huang Y, Zuo YD, et al. Enhanced energy storage property achieved in Na0.5Bi0.5TiO3-based ferroelectric ceramics via composition design and grain size tuning. J Eur Ceram Soc 2022, 42: 6985–6996.

[209]

Wan YH, Cao FL, Song JC, et al. High-temperature dielectric properties of Bi0.5Na0.5TiO3–NaNbO3–Sr0.8Na0.4Nb2O6 ceramics. Ceram Int 2022, 48: 13041–13046.

[210]

Zhang C, Xiao WR, Zeng FF, et al. Superior energy-storage performance in 0.85Bi0.5Na0.5TiO3–0.15NaNbO3 lead-free ferroelectric ceramics via composition and microstructure engineering. J Mater Chem A 2021, 9: 10088–10094.

[211]

Luo WX, Wu MX, Han YF, et al. Enhanced optical transmittance and energy-storage performance in NaNbO3-modified Bi0.5Na0.5TiO3 ceramics. J Am Ceram Soc 2023, 106: 4723–4731.

[212]

Qi H, Xie AW, Fu J, et al. Emerging antiferroelectric phases with fascinating dielectric, polarization and strain response in NaNbO3–(Bi0.5Na0.5)TiO3 lead-free binary system. Acta Mater 2021, 208: 116710.

[213]

Qi H, Zuo RZ, Xie AW, et al. Ultrahigh energy-storage density in NaNbO3-based lead-free relaxor antiferroelectric ceramics with nanoscale domains. Adv Funct Mater 2019, 29: 1903877.

[214]

Qi H, Zuo RZ. Giant electrostrictive strain in (Bi0.5Na0.5)TiO3–NaNbO3 lead-free relaxor antiferroelectrics featuring temperature and frequency stability. J Mater Chem A 2020, 8: 2369–2375.

[215]
Shimizu H, Guo HZ, Reyes-Lillo SE, et al. Lead-free antiferroelectric: xCaZrO3–(1−x)NaNbO3 system (0 ≤ x ≤ 0.01). Dalton T 2015, 44 : 10763–10772.
[216]

Guo HZ, Shimizu H, Randall CA. Direct evidence of an incommensurate phase in NaNbO3 and its implication in NaNbO3-based lead-free antiferroelectrics. Appl Phys Lett 2015, 107: 112904.

[217]

Liu ZY, Lu JS, Mao YQ, et al. Energy storage properties of NaNbO3–CaZrO3 ceramics with coexistence of ferroelectric and antiferroelectric phases. J Eur Ceram Soc 2018, 38: 4939–4945.

[218]

Liu GF, Chen L, Qi H. Energy storage properties of NaNbO3-based lead-free superparaelectrics with large antiferrodistortion. Microstructures 2023, 3: 2023009.

[219]

Xu HW, Navrotsky A, Su YL, et al. Perovskite solid solutions along the NaNbO3–SrTiO3 join: Phase transitions, formation enthalpies, and implications for general perovskite energetics. Chem Mater 2005, 17: 1880–1886.

[220]

Xie AW, Qi H, Zuo RZ, et al. An environmentally-benign NaNbO3 based perovskite antiferroelectric alternative to traditional lead-based counterparts. J Mater Chem C 2019, 7: 15153–15161.

[221]

Zhou MX, Liang RH, Zhou ZY, et al. Novel sodium niobate-based lead-free ceramics as new environment-friendly energy storage materials with high energy density, high power density, and excellent stability. ACS Sustain Chem Eng 2018, 6: 12755–12765.

[222]

Xie AW, Qi H, Zuo RZ. Achieving remarkable amplification of energy-storage density in two-step sintered NaNbO3–SrTiO3 antiferroelectric capacitors through dual adjustment of local heterogeneity and grain scale. ACS Appl Mater Inter 2020, 12: 19467–19475.

[223]

Beppu K, Shimasaki T, Fujii I, et al. Energy storage properties of antiferroelectric 0.92NaNbO3–0.08SrZrO3 film on (001)SrTiO3 substrate. Phys Lett A 2020, 384: 126690.

[224]

Xie AW, Fu J, Zuo RZ, et al. Supercritical relaxor nanograined ferroelectrics for ultrahigh-energy-storage capacitors. Adv Mater 2022, 34: e2204356.

[225]

Zhang MH, Ding H, Egert S, et al. Tailoring high-energy storage NaNbO3-based materials from antiferroelectric to relaxor states. Nat Commun 2023, 14: 1525.

[226]

Yang HB, Yan F, Lin Y, et al. A lead free relaxation and high energy storage efficiency ceramics for energy storage applications. J Alloys Compd 2017, 710: 436–445.

[227]

Li ZP, Li DX, Shen ZY, et al. Remarkably enhanced dielectric stability and energy storage properties in BNT–BST relaxor ceramics by A-site defect engineering for pulsed power applications. J Adv Ceram 2022, 11: 283–294.

[228]

Marlton F, Standard O, Kimpton JA, et al. Phase boundaries in the ternary (Bi0.5Na0.5TiO3) x (BaTiO3) y (SrTiO3)1− x y system. Appl Phys Lett 2017, 111: 202903.

[229]

Cao WP, Li WL, Zhang TD, et al. High-energy storage density and efficiency of (1– x)[0.94NBT–0.06BT]– xST lead-free ceramics. Energy Technol 2015, 3: 1198–1204.

[230]

Luo LH, Jiang XJ, Zhang YY, et al. Electrocaloric effect and pyroelectric energy harvesting of (0.94− x)N0.5Bi0.5TiO3–0.06BaTiO3 xSrTiO3 ceramics. J Eur Ceram Soc 2017, 37: 2803–2812.

[231]

Shi J, Liu X, Tian WC. High energy-storage properties of Bi0.5Na0.5TiO3–BaTiO3–SrTi0.875Nb0.1O3 lead-free relaxor ferroelectrics. J Mater Sci Technol 2018, 34: 2371–2374.

[232]

Yang HB, Yan F, Lin Y, et al. Novel strontium titanate-based lead-free ceramics for high-energy storage applications. ACS Sustainable Chem Eng 2017, 5: 10215–10222.

[233]

Yang CH, Qian J, Han YJ, et al. Design of an all-inorganic flexible Na0.5Bi0.5TiO3-based film capacitor with giant and stable energy storage performance. J Mater Chem A 2019, 7: 22366–22376.

[234]
Liu JQ, Song FS, Shen ZY, et al. (Mg1/3Ta2/3)4+ complex ion modified BNBST relaxor ferroelectric ceramics for energy storage applications. Mater Lab 2023, 2 : 220057.
[235]

Wang C, Yan F, Yang HB, et al. Dielectric and ferroelectric properties of SrTiO3–Bi0.54Na0.46TiO3–BaTiO3 lead-free ceramics for high energy storage applications. J Alloys Compd 2018, 749: 605–611.

[236]

Jan A, Liu HX, Hao H, et al. Enhanced dielectric breakdown strength and ultra-fast discharge performance of novel SrTiO3 based ceramics system. J Alloys Compd 2020, 830: 154611.

[237]

Yang CH, Han YJ, Feng C, et al. Toward multifunctional electronics: Flexible NBT-based film with a large electrocaloric effect and high energy storage property. ACS Appl Mater Inter 2020, 12: 6082–6089.

[238]

Xie YJ, Hao H, Xie J, et al. The energy-storage performance and dielectric properties of (0.94− x)BNT–0.06BT– xST thin films prepared by sol–gel method. J Alloys Compd 2021, 860: 158164.

[239]

Diao CL, Liu HX, Zheng HW, et al. Enhanced energy storage properties of BaTiO3 thin films by Ba0.4Sr0.6TiO3 layers modulation. J Alloys Compd 2018, 765: 362–368.

[240]

Ahmad A, Uddin S, Zheng GP, et al. Synthesis and temperature dependent energy storage characterization of (Bi1/2Na1/2)0.94Ba0.06TiO3)–Ba1/2Sr1/2TiO3 ceramics. Phys Scripta 2021, 96: 095809.

[241]

Zhang K, Zheng P, Zhang HF, et al. Excellent energy storage performance of paraelectric Ba0.4Sr0.6TiO3 based ceramics through induction of polar nano-regions. Ceram Int 2022, 48: 19864–19873.

[242]

Yang HG, Qi H, Zuo RZ. Enhanced breakdown strength and energy storage density in a new BiFeO3-based ternary lead-free relaxor ferroelectric ceramic. J Eur Ceram Soc 2019, 39: 2673–2679.

[243]

Li LS, Xie B, Liu ZY, et al. Improved energy storage performance of Ba0.4Sr0.6TiO3 by doping high polarization BiFeO3. Ceram Int 2021, 47: 14647–14654.

[244]

Li Y, Jiang N, Lam KH, et al. Structure, ferroelectric, piezoelectric, and ferromagnetic properties of BiFeO3–BaTiO3–Bi0.5Na0.5TiO3 lead-free multiferroic ceramics. J Am Ceram Soc 2014, 97: 3602–3608.

[245]

Mishra A, Majumdar B, Ranjan R. A complex lead-free (Na,Bi,Ba)(Ti,Fe)O3 single phase perovskite ceramic with a high energy-density and high discharge-efficiency for solid state capacitor applications. J Eur Ceram Soc 2017, 37: 2379–2384.

[246]

Tang ZH, Ge J, Ni H, et al. High energy-storage density of lead-free BiFeO3 doped Na0.5Bi0.5TiO3–BaTiO3 thin film capacitor with good temperature stability. J Alloys Compd 2018, 757: 169–176.

[247]

Yang CH, Lv PP, Qian J, et al. Fatigue-free and bending-endurable flexible Mn-doped Na0.5Bi0.5TiO3–BaTiO3–BiFeO3 film capacitor with an ultrahigh energy storage performance. Adv Energy Mater 2019, 9: 1803949.

[248]

Nie HH, Ruan LM, Hu L, et al. Enhanced dielectric energy storage performance of A-site Ca2+-doped Na0.5Bi0.5TiO3–BaTiO3–BiFeO3 Pb-free ceramics. Ceram Int 2022, 48: 21061–21070.

[249]

Tao CW, Geng XY, Zhang J, et al. Bi0.5Na0.5TiO3–BaTiO3–K0.5Na0.5NbO3: ZnO relaxor ferroelectric composites with high breakdown electric field and large energy storage properties. J Eur Ceram Soc 2018, 38: 4946–4952.

[250]

Lv JW, Song SM, Jiao Y, et al. Enhancing the dielectric and energy storage properties of lead-free Na0.5Bi0.5TiO3–BaTiO3 ceramics by adding K0.5Na0.5NbO3 ferroelectric. Ceram Int 2022, 48: 22–31.

[251]

Yan F, Qian J, Wang SM, et al. Progress and outlook on lead-free ceramics for energy storage applications. Nano Energy 2024, 123: 109394.

[252]

Zuo CY, Yang SL, Cao ZQ, et al. Excellent energy storage and hardness performance of Sr0.7Bi0.2TiO3 ceramics fabricated by solution combustion-synthesized nanopowders. Chem Eng J 2022, 442: 136330.

[253]

Luo J, Zhu H, Zheng TY, et al. A slush-like polar structure for high energy storage performance in a Sr0.7Bi0.2TiO3 lead-free relaxor ferroelectric thin film. J Mater Chem A 2022, 10: 7357–7365.

[254]

Zhou XY, Liu K, Yan ZL, et al. High energy storage efficiency of NBT–SBT lead-free ferroelectric ceramics. Ceram Int 2022, 48: 23266–23272.

[255]

Zeng FF, Zhang JJ, Zhou C, et al. Enhanced electric field-induced strain properties in lead-free BF–BT-based piezoceramics by local structure inhomogeneity. ACS Sustain Chem Eng 2022, 10: 1277–1286.

[256]

Liu G, Li Y, Guo B, et al. Ultrahigh dielectric breakdown strength and excellent energy storage performance in lead-free barium titanate-based relaxor ferroelectric ceramics via a combined strategy of composition modification, viscous polymer processing, and liquid-phase sintering. Chem Eng J 2020, 398: 125625.

[257]

Song BJ, Wu SH, Li F, et al. Excellent energy storage density and charge–discharge performance of a novel Bi0.2Sr0.7TiO3–BiFeO3 thin film. J Mater Chem C 2019, 7: 10891–10900.

[258]

Song BJ, Zhu K, Yan H, et al. High energy storage density with high power density in Bi0.2Sr0.7TiO3/BiFeO3 multilayer thin films. J Mater Chem C 2021, 9: 4652–4660.

[259]

Wang J, Zhou JF, Zhu H, et al. Enhanced energy storage performance in Na0.5Bi0.5TiO3–Sr0.7Bi0.2TiO3 relaxor ferroelectric thin films by entropy design. ACS Appl Electron Mater 2023, 5: 2809–2818.

[260]

Wang J, Qiu GX, Qian H, et al. Optimized energy-storage performance in Mn-doped Na0.5Bi0.5TiO3–Sr0.7Bi0.2TiO3 lead-free dielectric thin films. Appl Surf Sci 2022, 571: 151274.

[261]

Li JL, Li F, Xu Z, et al. Multilayer lead-free ceramic capacitors with ultrahigh energy density and efficiency. Adv Mater 2018, 30: 1802155.

[262]

Li JL, Shen ZH, Chen XH, et al. Grain-orientation-engineered multilayer ceramic capacitors for energy storage applications. Nat Mater 2020, 19: 999–1005.

[263]

Liu X, Rao RR, Shi J, et al. Effect of oxygen vacancy and A-site-deficiency on the dielectric performance of BNT–BT–BST relaxors. J Alloys Compd 2021, 875: 159999.

[264]

Chen L, Yu HF, Wu J, et al. Large energy capacitive high-entropy lead-free ferroelectrics. Nano-Micro Lett 2023, 15: 65.

[265]

Chen L, Wang N, Zhang ZF, et al. Local diverse polarization optimized comprehensive energy-storage performance in lead-free superparaelectrics. Adv Mater 2022, 34: 2205787.

[266]

Qi H, Xie AW, Tian A, et al. Superior energy-storage capacitors with simultaneously giant energy density and efficiency using nanodomain engineered BiFeO3–BaTiO3–NaNbO3 lead-free bulk ferroelectrics. Adv Energy Mater 2020, 10: 1903338.

[267]

Yao Y, Li Y, Sun NN, et al. High energy-storage performance of BNT–BT–NN ferroelectric thin films prepared by RF magnetron sputtering. J Alloys Compd 2018, 750: 228–234.

[268]

Cai ZM, Yang H, Zhu CQ, et al. Local heterogeneous polarization enhanced superior low-field energy storage performance in lead-free relaxor ferroelectric ceramics. ACS Sustain Chem Eng 2023, 11: 13729–13735.

[269]

Liu H, Sun Z, Zhang J, et al. Local chemical clustering enabled ultrahigh capacitive energy storage in Pb-free relaxors. J Am Chem Soc 2023, 145: 19396–19404.

[270]

Qi H, Xie AW, Zuo RZ. Local structure engineered lead-free ferroic dielectrics for superior energy-storage capacitors: A review. Energy Storage Mater 2022, 45: 541–567.

[271]

Zhang SJ. High entropy design: A new pathway to promote the piezoelectricity and dielectric energy storage in perovskite oxides. Microstructures 2022, 3: 2023003.

[272]

Mundy JA, Grosso BF, Heikes CA, et al. Liberating a hidden antiferroelectric phase with interfacial electrostatic engineering. Sci Adv 2022, 8: eabg5860.

[273]

Si YY, Zhang TF, Liu CH, et al. Antiferroelectric oxide thin-films: Fundamentals, properties, and applications. Prog Mater Sci 2024, 142: 101231.

Journal of Advanced Ceramics
Pages 877-910
Cite this article:
Dai S, Li M, Wu X, et al. Combinatorial optimization of perovskite-based ferroelectric ceramics for energy storage applications. Journal of Advanced Ceramics, 2024, 13(7): 877-910. https://doi.org/10.26599/JAC.2024.9220904

5086

Views

930

Downloads

6

Crossref

3

Web of Science

2

Scopus

0

CSCD

Altmetrics

Received: 16 February 2024
Revised: 01 April 2024
Accepted: 25 April 2024
Published: 30 July 2024
© The Author(s) 2024.

This is an open access article under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0, http://creativecommons.org/licenses/by/4.0/).

Return