PDF (16.9 MB)
Collect
Submit Manuscript
Research Article | Open Access

Synthesis of novel high-entropy diborides with high-efficiency electromagnetic wave absorption and excellent thermal stability

Chencheng Liu1,2,Qingyun Chen1,Peng Sun3Xingye Wang2()Shuyi Zeng1Qijie Chen1Tong Zhu2Yi Zhu2Wenlong Zhang2Hui Song2Yuezhong Wang2()Kazuhito Nishimura2Huasong Liu3()Nan Jiang2
College of Physics and Electronic Information Engineering, Guilin University of Technology, Guilin 541004, China
State Key Laboratory of Advanced Marine Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
Tianjin Key Laboratory of Optical Thin Films, Tianjin Jinhang Technical Physics Institute, Tianjin 300308, China

Chencheng Liu and Qingyun Chen contributed equally to this work.

Show Author Information

Graphical Abstract

View original image Download original image

Abstract

Ceramic materials have obvious advantages in thermal stability, but impedance mismatch limits their ability to attenuate electromagnetic (EM) waves. Herein, a novel series of high-entropy (V0.2Nb0.2Zr0.2Ta0.2X0.2)B2 (X = Mo, Ti, and Hf) ceramics were successfully synthesized via ultrafast high-temperature sintering (UHS) apparatus based on joule heating. The results indicated that the effect of high-entropy component on the magnetic loss of the system was relatively small, but the effect on the dielectric loss was larger. Among them, the (V0.2Nb0.2Zr0.2Ta0.2Ti0.2)B2 (HEB-Ti) sample demonstrated superior absorbing properties due to relatively moderate dielectric loss and optimal EM impedance matching. Moreover, because of its relatively moderate attenuation constant, it could achieve the maximum penetration of the EM wave and the minimum reflection after absorbing wave. As a result, the minimum reflection loss (RLmin) was as low as −40.7 dB, and the effective absorption band covered the entire low-frequency range from 2 to 8 GHz. Its excellent absorption performance was mainly due to the synergistic effect of various dielectric attenuation mechanisms, including defect polarization, dipole polarization, and conduction loss. Furthermore, thermogravimetric (TG) analysis showed that the sample exhibited excellent thermal stability and could withstand temperatures up to 550 °C in air and 1000 °C in an argon gas environment. The relevant work could provide meaningful references for the design of new high-performance ceramic wave-absorbing materials.

References

[1]

Zhang W, Su L, Lu D, et al. Resilient Si3N4@SiO2 nanowire aerogels for high-temperature electromagnetic wave transparency and thermal insulation. J Adv Ceram 2023, 12: 2112–2122.

[2]

Wang L, Cai ZX, Su L, et al. Bifunctional SiC/Si3N4 aerogel for highly efficient electromagnetic wave absorption and thermal insulation. J Adv Ceram 2023, 12: 309–320.

[3]

Xia QS, Han Z, Zhang ZC, et al. High temperature microwave absorbing materials. J Mater Chem C 2023, 11: 4552–4569.

[4]

Ma JB, Zhao B, Xiang HM, et al. High-entropy spinel ferrites MFe2O4 (M = Mg, Mn, Fe, Co, Ni, Cu, Zn) with tunable electromagnetic properties and strong microwave absorption. J Adv Ceram 2022, 11: 754–768.

[5]

Wu T, Liu Y, Zeng X, et al. Facile hydrothermal synthesis of Fe3O4/C core–shell nanorings for efficient low-frequency microwave absorption. ACS Appl Mater Inter 2016, 8: 7370–7380.

[6]

Kim T, Lee J, Lee K, et al. Magnetic and dispersible FeCoNi-graphene film produced without heat treatment for electromagnetic wave absorption. Chem Eng J 2019, 361: 1182–1189.

[7]

Che RC, Peng LM, Duan XF, et al. Microwave absorption enhancement and complex permittivity and permeability of Fe encapsulated within carbon nanotubes. Adv Mater 2004, 16: 401–405.

[8]

Cao YC, Ye F, Liang J, et al. Structural-functional-integrated ultra-wideband microwave-absorbing composites based on in situ-grown graphene meta-nanointerface. Adv Funct Mater 2024, 34: 2411271.

[9]

Yu ZJ, Chen T, Du HZ, et al. Single-source-precursor derived SiOC ceramics with insitu formed CNTs and core–shell structured CoSi@C nanoparticles towards excellent electromagnetic wave absorption properties. J Adv Ceram 2023, 12: 1119–1135.

[10]

Yin XM, Li HJ, Yuan RM, et al. Metal–organic framework derived hierarchical NiCo2O4 triangle nanosheet arrays@SiC nanowires network/carbon cloth for flexible hybrid supercapacitors. J Mater Sci Technol 2021, 81: 162–174.

[11]

Zhang XL, Li WW, Wan S, et al. Pressure dependence of the electrical conductivities of high-entropy diborides. J Eur Ceram Soc 2022, 42: 6951–6957.

[12]

Wen ZH, Meng H, Jiang SD, et al. Non-equimolar (Hf,Zr,Ta,W)B2 high-entropy diborides enable superior oxidation resistance. Sci China Mater 2023, 66: 3213–3222.

[13]

Qi W, Chen B, Yang X, et al. Phase stability, mechanical and thermodynamic properties of (Hf,Zr,Ta,M)B2 (M = Nb, Ti, Cr, W) quaternary high-entropy diboride ceramics via first-principles calculations. Ceram Int 2023, 49: 33255–33264.

[14]
Gao W, Wang XG, Wang XF, et al. Preparation of (Ti,Zr,Hf)B2 powders and effect of B4C content on the high temperature flexural strength of medium entropy ceramics. Advanced Ceramics 2023, 44 : 342–351. (in Chinese)
[15]

Tallarita G, Licheri R, Garroni S, et al. High-entropy transition metal diborides by reactive and non-reactive spark plasma sintering: A comparative investigation. J Eur Ceram Soc 2020, 40: 942–952.

[16]

Guo RR, Li ZJ, Li L, et al. Microstructures and oxidation mechanisms of (Zr0.2Hf0.2Ta0.2Nb0.2Ti0.2)B2 high-entropy ceramic. J Eur Ceram Soc 2022, 42: 2127–2134.

[17]

Qiao LJ, Bi JQ, Liang GD, et al. Synthesis and electromagnetic wave absorption performances of a novel (Mo0.25Cr0.25Ti0.25V0.25)3AlC2 high-entropy MAX phase. J Mater Sci Technol 2023, 137: 112–122.

[18]

Wang HH, Xiao XY, Zhai SR, et al. Spontaneous orientation polarization of anisotropic equivalent dipoles harnessed by entropy engineering for ultra-thin electromagnetic wave absorber. Nano-Micro Lett 2025, 17: 19.

[19]
Cheng JY, Li Y, Raza H, et al. Cross-scale synergistic manipulation of dielectric genes in polymetallic sulfides from micropolarization to macroconductance toward wide-band microwave absorption. Adv Funct Mater 2024: 2405643.
[20]

Zhang WM, Dai FZ, Xiang HM, et al. Enabling highly efficient and broadband electromagnetic wave absorption by tuning impedance match in high-entropy transition metal diborides (HE TMB2). J Adv Ceram 2021, 10: 1299–1316.

[21]

Chen H, Xiang HM, Dai FZ, et al. Porous high entropy (Zr0.2Hf0.2Ti0.2Nb0.2Ta0.2)B2: A novel strategy towards making ultrahigh temperature ceramics thermal insulating. J Mater Sci Technol 2019, 35: 2404–2408.

[22]

Gild J, Kaufmann K, Vecchio K, et al. Reactive flash spark plasma sintering of high-entropy ultrahigh temperature ceramics. Scripta Mater 2019, 170: 106–110.

[23]

Liu D, Wen TQ, Ye BL, et al. Synthesis of superfine high-entropy metal diboride powders. Scripta Mater 2019, 167: 110–114.

[24]

Shen XQ, Liu JX, Li F, et al. Preparation and characterization of diboride-based high entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)B2–SiC particulate composites. Ceram Int 2019, 45: 24508–24514.

[25]

Feng L, Fahrenholtz WG, Hilmas GE. Processing of dense high-entropy boride ceramics. J Eur Ceram Soc 2020, 40: 3815–3823.

[26]

Feng L, Monteverde F, Fahrenholtz WG, et al. Superhard high-entropy AlB2-type diboride ceramics. Scripta Mater 2021, 199: 113855.

[27]

Feltrin AC, Hedman D, Akhtar F. Transformation of metastable dual-phase (Ti0.25V0.25Zr0.25Hf0.25)B2 to stable high-entropy single-phase boride by thermal annealing. Appl Phys Lett 2021, 119: 161905.

[28]

Wang CW, Ping WW, Bai Q, et al. A general method to synthesize and sinter bulk ceramics in seconds. Science 2020, 368: 521–526.

[29]

Guo M, Dong Q, Xie H, et al. Ultrafast high-temperature sintering to avoid metal loss toward high-performance and scalable cermets. Matter 2022, 5: 594–604.

[30]

Deng B, Wang Z, Choi CH, et al. Kinetically controlled synthesis of metallic glass nanoparticles with expanded composition space. Adv Mater 2024, 36: 2309956.

[31]

Tallarita G, Licheri R, Garroni S, et al. Novel processing route for the fabrication of bulk high-entropy metal diborides. Scripta Mater 2019, 158: 100–104.

[32]

Ban QF, Li LW, Li Y, et al. Polymer self-assembly guided heterogeneous structure engineering towards high-performance low-frequency electromagnetic wave absorption. J Colloid Interf Sci 2023, 650: 1434–1445.

[33]

Zhu T, Wu H, Zhou R, et al. Microstructures and tribological properties of TiC reinforced FeCoNiCuAl high-entropy alloy at normal and elevated temperature. Metals 2020, 10: 387.

[34]

Hine R. Elementary derivation of the Bragg equation. Am J Phys 1965, 33: 962–963.

[35]

Yang Y, Bi JQ, Sun KN, et al. The effect of chemical element on hardness in high-entropy transition metal diboride ceramics. J Eur Ceram Soc 2023, 43: 5774–5781.

[36]

Wang YC, Csanádi T, Zhang HF, et al. Synthesis, microstructure, and mechanical properties of novel high entropy carbonitrides. Acta Mater 2022, 231: 117887.

[37]

Yang TT, Li Y, Wu WW, et al. The synergistic effect of dual substitution of Al and Sb on structure and ionic conductivity of Li7La3Zr2O12 ceramic. Ceram Int 2018, 44: 1538–1544.

[38]

Zhang HH, Liu H, Wu HB, et al. Microwave absorbing property of gelcasting SiC–Si3N4 ceramics with hierarchical pore structures. J Eur Ceram Soc 2022, 42: 1249–1257.

[39]

Feng ZB, Liu CB, Li X, et al. Designing electronic structures of multiscale helical converters for tailored ultrabroad electromagnetic absorption. Nano-Micro Lett 2024, 17: 20.

[40]

Li FS, Wu NN, Kimura H, et al. Initiating binary metal oxides microcubes electromagnetic wave absorber toward ultrabroad absorption bandwidth through interfacial and defects modulation. Nano-Micro Lett 2023, 15: 220.

[41]
Hu RZ, He X, Luo YQ, et al. Biomimetic multi-interface design of raspberry-like absorbent: Gd-doped FeNi3@covalent organic framework derivatives for efficient electromagnetic attenuation. Small Methods 2024: 2401299.
[42]

Feltrin AC, Akhtar F. High-temperature oxidation kinetics of a metastable dual-phase diboride and a high-entropy diboride. J Eur Ceram Soc 2023, 43: 7363–7372.

[43]

Tang ZY, Wen ZH, Liu YW, et al. Rapid experimental screening of high-entropy diborides for superior oxidation resistance. Adv Funct Mater 2024, 34: 2312239.

[44]

Zhang WM, Zhao B, Xiang HM, et al. One-step synthesis and electromagnetic absorption properties of high entropy rare earth hexaborides (HE REB6) and high entropy rare earth hexaborides/borates (HE REB6/HE REBO3) composite powders. J Adv Ceram 2021, 10: 62–77.

[45]

Green M, Liu Z, Xiang P, et al. Ferric metal-organic framework for microwave absorption. Mater Today Chem 2018, 9: 140–148.

[46]

Wen HL, Xu W, Lin S, et al. Enhanced microwave absorption using multiple heterostructures derived from in situ grown Sn-metal-organic framework on La-doped Fe3O4. Carbon 2024, 230: 119613.

[47]

Lin S, Lin J, Xiong ZQ, et al. Micro-helical Ni3Fe chain encapsulated in ultralight MXene/C aerogel to realize multi-functionality: Radar stealth, thermal insulation, fire resistance, and mechanical properties. Chem Eng J 2024, 492: 152248.

[48]
Fan BB, Shang SY, Dai BZ, et al. 2D-layered Ti3C2/TiO2 hybrids derived from Ti3C2 MXenes for enhanced electromagnetic wave absorption. Ceram Int 2020, 46 : 17085–17092.
[49]

Jian X, Tian W, Li JY, et al. High-temperature oxidation-resistant ZrN0.4B0.6/SiC nanohybrid for enhanced microwave absorption. ACS Appl Mater Inter 2019, 11: 15869–15880.

[50]

Song ZR, Sun MX, Wu LP, et al. Dielectric loss behavior and microwaves absorption properties of TiB2 ceramic. Mater Res Express 2020, 7: 046301.

[51]

Zhou YC, Zhao B, Chen H, et al. Electromagnetic wave absorbing properties of TMCs (TM = Ti, Zr, Hf, Nb and Ta) and high entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C. J Mater Sci Technol 2021, 74: 105–118.

[52]

Wu RB, Zhou K, Yang ZH, et al. Molten-salt-mediated synthesis of SiC nanowires for microwave absorption applications. Cryst Eng Comm 2013, 15: 570–576.

[53]

Qing YC, Zhou WC, Luo F, et al. Titanium carbide (MXene) nanosheets as promising microwave absorbers. Ceram Int 2016, 42: 16412–16416.

[54]

Wang WL, Sun GX, Sun XN, et al. Electromagnetic wave absorbing properties of high-entropy transition metal carbides powders. Mater Res Bull 2023, 163: 112212.

[55]

Zhang WM, Xiang HM, Dai FZ, et al. Achieving ultra-broadband electromagnetic wave absorption in high-entropy transition metal carbides (HE TMCs). J Adv Ceram 2022, 11: 545–555.

[56]

Yang PP, Liu Y, Zhao XC, et al. Electromagnetic wave absorption properties of mechanically alloyed FeCoNiCrAl high entropy alloy powders. Adv Powder Technol 2016, 27: 1128–1133.

[57]

Cai XD, Guo HQ, Zhu HJ, et al. Effect of cooling medium on the preparation and microwave absorption properties in low frequency for LiZn ferrites hollow microspheres. J Alloys Compd 2022, 906: 164290.

[58]

Liu CC, Chen QY, Li XH, et al. Low-temperature synthesis of a novel diboride ceramic with electromagnetic wave absorption properties. J Mater Sci-Mater El 2024, 35: 287.

[59]

Gong YB, Yang ZG, Wei XG, et al. Synthesis and electromagnetic wave absorbing properties of high-entropy metal diboride-silicon carbide composite powders. J Mater Sci 2022, 57: 9218–9230.

[60]

Dai D, Lan XL, Wu LN, et al. Designed fabrication of lightweight SiC/Si3N4 aerogels for enhanced electromagnetic wave absorption and thermal insulation. J Alloys Compd 2022, 901: 163651.

[61]

Du H, Zhang QP, Zhao B, et al. Novel hierarchical structure of MoS2/TiO2/Ti3C2T x composites for dramatically enhanced electromagnetic absorbing properties. J Adv Ceram 2021, 10: 1042–1051.

[62]

Li Y, Jin YH, Cheng JY, et al. Achieving superior electromagnetic wave absorbers with 2D/3D heterogeneous structures through the confinement effect of reduced graphene oxides. Carbon 2023, 213: 118245.

[63]

Peng HL, Xiong ZQ, Gan ZH, et al. Microcapsule MOFs@MOFs derived porous “nut-bread” composites with broadband microwave absorption. Compos Part B-Eng 2021, 224: 109170.

[64]

Gao Y, Du H, Li RR, et al. Multi-phase heterostructures of flower-like Ni(NiO) decorated on two-dimensional Ti3C2T x /TiO2 for high-performance microwave absorption properties. Ceram Int 2021, 47: 10764–10772.

[65]

Wang JW, Sun QH, Li JY, et al. Polymer-based nanocomposites: Role of interface for effective microwave absorption. Mater Today Phys 2023, 31: 100981.

[66]

Xu BK, He QC, Wang YQ, et al. Ultralight and efficient microwave absorption of SiC/SiO2 ceramic aerogels derived from biomass. Ceram Int 2023, 49: 30125–30136.

[67]

Tian YX, Huang M, Kong NZ, et al. Designing insulative SiC coating layer on the artificial graphite particle to achieve synergy of wave absorption and thermal conduction. Carbon 2023, 214: 118352.

[68]

Liu C, Qiao J, Zhang X, et al. Noncovalent self-assembly of a minuscule amount of nickel porphyrin on carbon nanotube for high-performance electromagnetic wave absorbing. Compos Part A-Appl S 2023, 164: 107281.

[69]

Zhao B, Shao G, Fan BB, et al. Facile synthesis and novel microwave electromagnetic properties of flower-like Ni structures by a solvothermal method. J Mater Sci-Mater El 2014, 25: 3614–3621.

[70]

Liu CC, Zhu T, Jia J, et al. Facile synthesis of novel nitrogen-doped diamond with excellent microwave absorption and thermal conductive performance. Diam Relat Mater 2025, 151: 111789.

[71]

Liu P, Ng VMH, Yao Z, et al. Facile synthesis and hierarchical assembly of flowerlike NiO structures with enhanced dielectric and microwave absorption properties. ACS Appl Mater Inter 2017, 9: 16404–16416.

[72]

Fu YR, Wang YP, Cheng JY, et al. Manipulating polarization attenuation in NbS2–NiS2 nanoflowers through homogeneous heterophase interface engineering toward microwave absorption with shifted frequency bands. Nano Mater Sci 2024, 6: 794–804.

[73]

Guan GG, Yan L, Zhou YT, et al. Composition design and performance regulation of three-dimensional interconnected FeNi@carbon nanofibers as ultra-lightweight and high efficiency electromagnetic wave absorbers. Carbon 2022, 197: 494–507.

[74]

Wang J, Wang YP, Cheng JY, et al. Abundant vacancies induced high polarization-attenuation effects in flower-like WS2 microwave absorbers. J Mater Sci Technol 2024, 194: 193–202.

[75]

Zhao HQ, Cheng Y, Zhang Z, et al. Biomass-derived graphene-like porous carbon nanosheets towards ultralight microwave absorption and excellent thermal infrared properties. Carbon 2021, 173: 501–511.

Journal of Advanced Ceramics
Article number: 9221030
Cite this article:
Liu C, Chen Q, Sun P, et al. Synthesis of novel high-entropy diborides with high-efficiency electromagnetic wave absorption and excellent thermal stability. Journal of Advanced Ceramics, 2025, 14(2): 9221030. https://doi.org/10.26599/JAC.2025.9221030
Metrics & Citations  
Article History
Copyright
Rights and Permissions
Return