Ceramic coatings with high hydrogen permeation resistance are highly important for protecting metal components from hydrogen attack. In this work, we fabricated an ultrathin (AlCrZr)O nanofilm with superior hydrogen barrier efficiency via a facile sol‒gel technique. This novel ternary oxide nanofilm with an overall thickness of only 100 nm has a high hydrogen permeation reduction factor (PRF) of up to 2364 at 773 K, decreasing the hydrogen permeability by three orders of magnitude compared to that of the steel substrate. The permeation cycling performance and thermal shock resistance of the nanofilm were further evaluated, which demonstrated good stability, with its PRF consistently remaining at a level of 103. These excellent performances of the (AlCrZr)O nanofilm were attributed to its uniquely layered structure, consisting of an amorphous Al‒Zr‒O layer at the top and a crystalline Cr2O3 layer underneath. The amorphous layer without grain boundaries complicated the hydrogen diffusion pathways and effectively increased the hydrogen resistance. Moreover, the crystalline Cr2O3 layer could help mitigate the thermal expansion mismatch between the nanofilm and the steel substrate, ensuring good stability of the barrier performance under thermal conditions. These findings underscore the significant potential of the (AlCrZr)O nanofilm for hydrogen embrittlement protection and provide a new framework for designing highly efficient hydrogen permeation barriers that combine superior performance with extended lifespans.
Sadik-Zada ER, Gatto A, Weißnicht Y. Back to the future: Revisiting the perspectives on nuclear fusion and juxtaposition to existing energy sources. Energy 2024, 290: 129150.
Xiang X, Wang XL, Zhang GK, et al. Preparation technique and alloying effect of aluminide coatings as tritium permeation barriers: A review. Int J Hydrogen Energy 2015, 40: 3697–3707.
Du JL, Jiang SH, Cao PP, et al. Superior radiation tolerance via reversible disordering–ordering transition of coherent superlattices. Nat Mater 2023, 22: 442–449.
Abdou M, Riva M, Ying A, et al. Physics and technology considerations for the deuterium–tritium fuel cycle and conditions for tritium fuel self sufficiency. Nucl Fusion 2021, 61: 013001.
Endoh R, Nogami S, Hishinuma Y, et al. Submicron-thick yttria-stabilized zirconia coating as an advanced tritium permeation barrier. Nucl Fusion 2021, 61: 076015.
Zaborowska A, Kurpaska Ł, Wyszkowska E, et al. Influence of ion irradiation on the nanomechanical properties of thin alumina coatings deposited on 316L SS by PLD. Surf Coat Tech 2020, 386: 125491.
Kim W, Oh HS, Shon IJ. The effect of graphene reinforcement on the mechanical properties of Al2O3 ceramics rapidly sintered by high-frequency induction heating. Int J Refract Met H 2015, 48: 376–381.
Xue Y, Pu G, Yu MM, et al. Effects of air annealing treatments on the microstructure, components, and mechanical properties of magnetron sputtered Al2O3–Cr2O3–ZrO2 composite coatings. Ceram Int 2023, 49: 7589–7599.
Huang KZ, Liu H, Wang WJ, et al. Predicting the residual stress of amorphous Al2O3–Y2O3 nano-laminated deuterium permeation barrier under thermal cycles. Coatings 2022, 12: 1780.
Abedini S, Dong CS, Davies IJ. Finite element analysis of edge crack delamination and optimization of functionally graded interlayer for coated stainless steel in hydrogen storage applications. Surf Coat Tech 2019, 372: 148–159.
Kaner RB, Gilman JJ, Tolbert SH. Designing superhard materials. Science 2005, 308: 1268–1269.
Li Q, Wang J, Xiang QY, et al. Novel nano-crystalline Er2O3 hydrogen isotopes permeation barriers. J Eur Ceram Soc 2017, 37: 249–254.
Hu LL, Wei G, Yin R, et al. Significant hydrogen isotopes permeation resistance via nitride nano-multilayer coating. Int J Hydrog Energy 2020, 45: 19583–19589.
Mao W, Chikada T, Suzuki A, et al. Hydrogen diffusion along grain boundaries in erbium oxide coatings. J Nucl Mater 2014, 455: 360–365.
Kim T, Lee J, Kim S, et al. Hydrogen permeation barrier of carbon-doped TiZrN coatings by laser carburization. Corros Sci 2021, 190: 109700.
Samanta S, Singh C, Banerjee A, et al. Development of amorphous Ni-P coating over API X70 steel for hydrogen barrier application. Surf Coat Tech 2020, 403: 126356.
Ke NW, Huang HS, Wang FH, et al. Study on the hydrogen barrier performance of the SiOC coating. Int J Hydrogen Energy 2023, 48: 8286–8295.
Iadicicco D, Bassini S, Vanazzi M, et al. Efficient hydrogen and deuterium permeation reduction in Al2O3 coatings with enhanced radiation tolerance and corrosion resistance. Nucl Fusion 2018, 58: 126007.
Zhao YH, Ma HT, Wang L, et al. Effect of solution treatment on microstructures and mechanical properties of AISI 321 service. Acta Metall Sin-Engl 2011, 24: 243–248.
Zhang GK, Chen CA, Luo DL, et al. An advance process of aluminum rich coating as tritium permeation barrier on 321 steel workpiece. Fusion Eng Des 2012, 87: 1370–1375.
Nouri E, Shahmiri M, Rezaie HR, et al. A comparative study of heat treatment temperature influence on the thickness of zirconia Sol–gel thin films by three different techniques: SWE, SEM and AFM. Surf Coat Tech 2012, 206: 3809–3815.
Zheng LY, Li HP, Zhou J, et al. Layer-structured Cr/CrxN coating via electroplating-based nitridation achieving high deuterium resistance as the hydrogen permeation barrier. J Adv Ceram 2022, 11: 1944–1955.
Tian XL, Li HP, Zheng LY, et al. Effect of Cr2O3 nanosheet insertion on the deuterium permeation behavior of a Cr–Zr–O coating. Plasma Sci Technol 2022, 24: 124017.
Li HP, Zheng ZY, Liu SQ, et al. Thermochemically synthesized α-Al2O3 composite coating with high bonding strength and deuterium permeation resistance. J Am Ceram Soc 2024, 107: 1871–1882.
Zheng ZY, Yang ZC, Yan YW, et al. Effects of internal stress and hydrogen penetration on the performance of Er2O3 coatings as hydrogen permeation barriers. ACS Appl Mater Inter 2024, 16: 22471–22481.
Yu MM, Pu G, Xue Y, et al. The oxidation behaviors of high-purity niobium for superconducting radio-frequency cavity application in vacuum heat treatment. Vacuum 2022, 203: 111258.
Hu LL, Zhong F, Zhang J, et al. High hydrogen isotopes permeation resistance in (TiVAlCrZr)O multi-component metal oxide glass coating. Acta Mater 2022, 238: 118204.
Ye G, Wang H, Arulkumaran S, et al. Band alignment between GaN and ZrO2 formed by atomic layer deposition. Appl Phys Lett 2014, 105: 022106.
Guo Q, Joyner RW. An X-ray photoelectron spectroscopy study of the stability of ZrO2 films on Pd(110). Appl Surf Sci 1999, 144: 375–379.
Kadari A, Schemme T, Kadri D, et al. XPS and morphological properties of Cr2O3 thin films grown by thermal evaporation method. Results Phys 2017, 7: 3124–3129.
Xiong LW, Liu SH, Peng BX. Mechanism of hologram formation in dichromated gelatin with X-ray photoelectron spectroscopy. Appl Optics 1998, 37: 3678–3684.
Li LF, Zhang X, Humayun M, et al. Manipulation of electron spins with oxygen vacancy on amorphous/crystalline composite-type catalyst. ACS Nano 2024, 18: 1214–1225.
Wei Z, Wang WC, Li WL, et al. Steering electron–hole migration pathways using oxygen vacancies in tungsten oxides to enhance their photocatalytic oxygen evolution performance. Angew Chem Int Edit 2021, 60: 8236–8242.
Yang FR, Ye JY, Gao L, et al. Ultrathin PtNiGaSnMoRe senary nanowires with partial amorphous structure enable remarkable methanol oxidation electrocatalysis. Adv Energy Mater 2023, 13: 2301408.
He YS, Zhou HY, Zhao YC, et al. Investigating the thermal stability of compressive residual stress in a gradient nanostructured austenitic stainless steel by in situ XRD and TEM. Mater Charact 2024, 207: 113610.
Du R, Song HX, Gao FH, et al. Machine learning informed visco-plastic model for the cyclic relaxation of 316H stainless steel at 550 °C. Int J Plasticity 2023, 170: 103743.
Boesono Ir, Ernst GJ, Lemmens MC, et al. A zener-damping peak in Fe–4 wt% Si. Phys Status Solidi B 1967, 19: 107–110.
Wang JP, Ling YH, Lu ZX, et al. Hydrogen interaction characteristics of a Cr2O3 Y2O3 coating formed on stainless steel in an ultra-low oxygen environment. Int J Hydrogen Energ 2019, 44: 8669–8679.
Wang JP, Lu ZX, Ling YH, et al. Hydrogen permeation properties of CrxCy@Cr2O3/Al2O3 composite coating derived from selective oxidation of a CrC alloy and atomic layer deposition. Int J Hydrogen Energ 2018, 43: 21133–21141.
Wu YY, He D, Li S, et al. Deuterium permeation properties of Y2O3/Cr2O3 composite coating prepared by MOCVD on 316L stainless steel. Int J Hydrogen Energ 2016, 41: 7425–7430.
Chae JH, Lee JY, Kang SW. Measurement of thermal expansion coefficient of poly-Si using microgauge sensors. Sensor Actuat A Phys 1999, 75: 222–229.
Li FJ, Zheng ZY, Wang XY, et al. Horizontally aligned BN nanosheet array for nanometer-thick ZrO2 coating with greatly enhanced anticorrosion and hydrogen isotope resistance property. Chem Eng J 2022, 440: 135920.
Zheng ZY, Li HP, Li FJ, et al. An efficient PDA/Al2O3 nanosheets reinforced ultra-thin ZrO2 coating with attractive anti-corrosion and deuterium resistance property. Chem Eng J 2022, 450: 138307.
Yang H, Shao ZM, Wang W, et al. A composite coating of GO-Al2O3 for tritium permeation barrier. Fusion Eng Des 2020, 156: 111689.
Liang CF, Liu W, Xia XB, et al. An Al2O3/Ni–Al tritium permeation barrier coating for the potential application in thorium-based molten salt reactor. Vacuum 2023, 213: 112110.
Li Q, Mo LB, Wang J, et al. Performances of Cr2O3–hydrogen isotopes permeation barriers. Int J Hydrogen Energ 2015, 40: 6459–6464.
Somjit V, Yildiz B. Doping α-Al2O3 to reduce its hydrogen permeability: Thermodynamic assessment of hydrogen defects and solubility from first principles. Acta Mater 2019, 169: 172–183.
Zhu SF, Wu YP, Liu TW, et al. Interface structure and deuterium permeation properties of Er2O3/SiC multilayer film prepared by RF magnetron sputtering. Int J Hydrogen Energ 2015, 40: 5701–5706.
Wang L, Wu YY, Luo XF, et al. Effects of Ar/O2 ratio on preparation and properties of multilayer Cr2O3/α-Al2O3 tritium permeation barrier. Surf Coat Tech 2018, 339: 132–138.