Abstract
Thermophysical parameters are the main parameters affecting the utilization efficiency of shallow geothermal energy. Based on the research and evaluation data of shallow geothermal energy in capital cities of China,this paper analyzes the differences between two testing methods and finds that data measured in in-situ thermal conductivity test is closer to the actual utilization. This paper analyzes the influencing factors of thermophysical parameters from lithology,density,moisture content and porosity: The thermal conductivity coefficient of bedrock is generally higher than Quaternary system loose bed soil; as for the coefficient of bedrock,dolomite,shale and granite are higher while gabbro,sandstone and mudstone are lower; as for the coefficient of loose bed,pebble and gravel are higher while clay and silt are lower. As the particle size of sand decreases,the thermal conductivity coefficient declines accordingly. The thermal conductivity coefficient increases linearly with growing density and decreases in logarithm with growing moisture content as well as porosity; specific heat capacity decreases in logarithm with growing density,increases in power exponent with growing moisture content and decreases linearly with growing porosity. The thermal conductivity coefficient is high when hydrodynamic condition is good and vice versa. The conclusions of this paper have guiding significance for the research,evaluation and development of shallow geothermal energy in other areas.
