AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.3 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Original Article | Open Access

Effect of Acetic Acid Prehydrolysis on Unbleached Bamboo Pulp Production

YangYang PengChenYin ChenYing WangShiYu Fu( )
State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, Guangdong Province, 510640, China
Show Author Information

Abstract

Bamboo was used as raw material for unbleached pulp production.An acetic acid prehydrolysis process was employed before the pulping process.The effect of acetic acid prehydrolysis on pulp properties was investigated.The results showed that some components, such as hemicellulose and extractives, were degraded or dissolved in the prehydrolysis process prior to kraft pulping.SEM images of the substrate after treatment indicated that the parenchyma cell wall was thinner, and the size of pores between fiber bundle cell walls was larger.The pulping results showed that acetic acid prehydrolysis could improve the pulp quality and make the pulp easier to bleach.The brightness of the pulp reached 59.6%ISO with a single oxygen delignification step.The acetic acid prehydrolysis decreased pulp viscosity and fiber length, but not significantly.The amount of parenchyma cells in the pulp was reduced, which was beneficial for papermaking and improving mechanical strength of paper.This procedure has good potential for unbleached pulp production.

References

[1]

Maria S, Raimo A, Mânthihong V. Description of kraft cooking and oxygen-alkali delignification of bamboo by pulp and dissolving material analysis[J]. Industrial Crops & Products, 2008, 28(1): 47-55.

[2]

Kumar P, Barrett D M, Delwiche M J, et al. Methods for pretreatment of lignocellulosic biomass for efficient hydrolysis and biofuel production[J]. Industrial & Engineering Chemistry Research, 2009, 48(8): 3713-3729.

[3]

Garrote G, Eugenio M E, DıAz M J, et al. Hydrothermal and pulp processing of Eucalyptus[J]. Bioresource Technology, 2003, 88(1): 61-68.

[4]

Mosier N, Hendrickson R, Ho N, et al. Optimization of p Hcontrolled liquid hot water pretreatment of corn stover[J]. Bioresource Technology, 2005, 96(18): 1986-1993.

[5]

Laser M, Schulman D, Allen S G, et al. A comparison of liquid hot water and steam pretreatments of sugar cane bagasse for bioconversion to ethanol[J]. Fuel & Energy, 2002, 81(1): 33-44.

[6]

Teymouri F, Laureanoperez L, Alizadeh H, et al. Optimization of the ammonia fiber explosion (AFEX) treatment parameters for enzymatic hydrolysis of corn stover[J]. Bioresource Technology, 2005, 96(18): 2014-2018.

[7]

Li G, Fu S, Zhou A, et al. Improved cellulose yield in the production of dissolving pulp from bamboo using acetic acid in prehydrolysis[J]. Bioresources, 2014, 10(1): 877-886.

[8]
TAPPI Standard Test Method. TAPPI T230om-08: 2008Viscosity of Pulp (Capillary Viscometer Method)[S].
[9]
TAPPI Standard Test Method. TAPPI T525om-06: 2006Diffuse Brightness of Paper, Paperboard and Pulp[S].
[10]

Heitz M, Carrasco F, Rubio M, et al. Generalized correlations for the aqueous liquefaction of lignocellulosics[J]. Canadian Journal of Chemical Engineering, 1986, 64(4): 647-650.

[11]

Sabanci K, Buyukkileci A O. Comparison of liquid hot water, very dilute acid and alkali treatments for enhancing enzymatic digestibility of hazelnut tree pruning residues[J]. Bioresource Technology, 2018, 261: 158-165.

[12]

Allen S G, Kam L C, Zemann, A J, et al. Fractionation of sugar cane with hot, compressed, liquid water[J]. Industrial and Engineering Chemistry Research, 1996, 35(8): 2709-2715.

[13]

Vu T M, Pakkanen H, Alen R. Delignification of bamboo (Bambusa procera acher): Part 1. Kraft pulping and the subsequent oxygen delignification to pulp with a low kappa number[J]. Industrial Crops & Products, 2004, 19(1): 49-57.

[14]

Rauhala T, King A W T, Zuckerstaetter G, et al. Effect of auto hydrolysis on the lignin structure and the kinetics of delignification of birch wood[J]. Nordic Pulp & Paper Research Journal, 2011, 26(4): 386-391.

[15]

Kishino M, Nakano T. Artificial weathering of tropical woods. Part 2: Color change[J]. Holzforschung, 2004, 21(6): 381-565.

Paper and Biomaterials
Pages 26-31
Cite this article:
Peng Y, Chen C, Wang Y, et al. Effect of Acetic Acid Prehydrolysis on Unbleached Bamboo Pulp Production. Paper and Biomaterials, 2018, 3(3): 26-31. https://doi.org/10.26599/PBM.2018.9260018

442

Views

37

Downloads

1

Crossref

0

Scopus

Altmetrics

Received: 07 May 2018
Accepted: 23 May 2018
Published: 01 July 2018
© 2018 Paper and Biomaterials Editorial Board

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Return