AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (777.4 KB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Nano-Cu2O-loaded Paper: Green Preparation and High Visible Light Photocatalytic Performance for Formaldehyde Removal

Lijian SunXin XinXianhui AnXueren Qian( )
Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin, Heilongjiang Province, 150040, China
Show Author Information

Abstract

The removal of formaldehyde (HCHO) from indoor air is of great importance to reduce health risks and improve indoor air quality. In this study, nano-Cu2O-loaded paper with superior photocatalytic activity under visible light for the removal of HCHO was fabricated through a green, simple, and fast in situ synthesis method. The optimum preparation conditions for nano-Cu2O-loaded paper were as follows: 2 g (oven-dry basis) cellulose fibers, CuSO4 dosage 8 g, NaOH dosage 1.6 g, temperature 2+ 80℃, 60 min for Cu2+ absorption, and 60 min for reaction. Under the optimum conditions, the Cu2O deposition ratio approached 30% and the nano-Cu2O-loaded paper exhibited a catalytic efficiency of approximately 97% for HCHO removal. The photocatalytic capacity of nano-Cu2O-loaded paper for HCHO removal had a positive correlation with the deposition ratio of nano Cu2O particles. Excellent antibacterial property of nanoCu2O-loaded paper against Staphylococcus aureus and Escherichia coli was also confirmed. Moreover, nano-Cu2O-loaded paper was proven to be hydrophobic.

References

[1]

Oliveira S V W B, Moraes E M, Adorno M A T, et al. Formaldehyde degradation in an anaerobic packed-bed bioreactor[J]. Water Research, 2004, 38(7): 1685-1694.

[2]

Wang L, Liang X Y, Chang Z Y, et al. Effective formaldehyde capture by green cyclodextrin based metalorganic framework[J]. ACS Applied Materials & Interfaces, 2017, 10(1): 42-46.

[3]

Tang X, Bai Y, Duong A, et al. Formaldehyde in China: production, consumption, exposure levels, and health effects[J]. Environment International, 2009, 35(8): 1210-1224.

[4]

Salthammer T, Mentese S, Marutzky R. Formaldehyde in the indoor environment[J]. Chemical Review, 2010, 110(4): 2536-2572.

[5]

Lin F, Zhu G, Shen Y, et al. Study on the modified montmorillonite for adsorbing formaldehyde[J]. Applied Surface Science, 2015, 356: 150-156.

[6]

Carter E M, Katz L E, Speitel G E, et al. Gas-phase formaldehyde adsorption isotherm studies on activated carbon: correlations of adsorption capacity to surface functional group density[J]. Environmental Science & Technology, 2011, 45(15): 6498-6503.

[7]

Yu J, Zhou M, Cheng B, et al. Ultrasonic preparation of mesoporous titanium dioxide nanocrystalline photocatalysts and evaluation of photocatalytic activity[J]. Journal of Molecular Catalysis A: Chemical, 2005, 227(1/2): 75-80.

[8]

Gao L, Gan W, Xiao S, et al. Enhancement of photocatalytic degradation of formaldehyde through loading anatase TiO2 and silver nanoparticle films on wood substrates[J]. RSC Adv, 2015, 5(65): 52985-52992.

[9]

Zhang C, He H, Tanaka K I. Perfect catalytic oxidation of formaldehyde over a Pt/TiO2 catalyst at room temperature[J]. Catalysis Communications, 2005, 6(3): 211-214.

[10]

Zhang C, He H, Tanaka K I. Catalytic performance and mechanism of a Pt/TiO2 catalyst for the oxidation of formaldehyde at room temperature[J]. Applied Catalysis B: Environmental, 2006, 65(1/2): 37-43.

[11]

Xu C, Yang W, Guo Q, et al. Photoinduced decomposition of formaldehyde on a TiO2(110) surface, assisted by bridge-bonded oxygen atoms[J]. The Journal of Physical Chemistry Letters, 2013, 4(16): 2668-2673.

[12]

Sekine Y. Oxidative decomposition of formaldehyde by metal oxides at room temperature[J]. Atmospheric Environment, 2002, 36(35): 5543-5547.

[13]

Cao H, Yang A, Li H, et al. A non-enzymatic glucose sensing based on hollow cuprous oxide nanospheres in a nafion matrix[J]. Sensors and Actuators B: Chemical, 2015, 214: 169-173.

[14]

Zang Z, Nakamura A, Temmyo J. Single cuprous oxide films synthesized by radical oxidation at low temperature for PV application[J]. Optics Express, 2013, 21(9): 11448-11456.

[15]

Yan D, Li S, Hu M, et al. Electrochemical synthesis and the gas sensing properties of the Cu2O nanofilms/porous silicon hybrid structure[J]. Sensors and Actuators B: Chemical, 2015, 223: 626-633.

[16]

Pang H, Li Q Y, Zhang L, et al. Fabrication of Cu2O-based materials for lithium-ion batteries[J]. Chem Sus Chem, 2018, 11(10): 1581-1599.

[17]

Abdelfatah M, Ledig J, El-Shaer A, et al. Fabrication and characterization of low cost Cu2O/ZnO: Al solar cells for sustainable photovoltaics with earth abundant materials[J]. Solar Energy Materials & Solar Cells, 2015, 145: 454-461.

[18]

Zou W, Zhang L, Liu L, et al. Engineering the Cu2O-reduced graphene oxide interface to enhance photocatalytic degradation of organic pollutants under visible light[J]. Applied Catalysis B: Environmental, 2016, 181: 495-503.

[19]

Da Costa W V, Pereira B S, Montanha M C, et al. Hybrid materials based on cotton fabric-Cu2O nanoparticles with antibacterial properties against S. aureus[J]. Materials Chemistry and Physics, 2017, 201: 339-343.

[20]

Hua Q, Shang D, Zhang W, et al. Morphological evolution of Cu2O nanocrystals in an acid solution: stability of different crystal planes[J]. Langmuir, 2011, 27(2): 665-671.

[21]

Huang W C, Lyu L M, Yang Y C, et al. Synthesis of Cu2O nanocrystals from cubic to rhombic dodecahedral structures and their comparative photocatalytic activity[J]. Journal of the American Chemical Society, 2012, 134(2): 1261-1267.

[22]

Chen J Y, Zhou P J, Li J L, et al. Studies on the photocatalytic performance of cuprous oxide/chitosan nanocomposites activated by visible light[J]. Carbohydrate Polymers, 2008, 72(1): 128-132.

[23]

Su X, Liao Q, Liu L, et al. Cu2O nanoparticlefunctionalized cellulose-based aerogel as highperformance visible-light photocatalyst[J]. Cellulose, 2017, 24(2): 1017-1029.

[24]

Wang X, Chen G, Zhang J. Synthesis and characterization of novel Cu2O/PANI composite photocatalysts with enhanced photocatalytic activity and stability[J]. Catalysis Communications, 2013, 31(6): 57-61.

[25]

Medina-Valtierra J, Calixto S, Ruiz F. Formation of copper oxide films on fiberglass by adsorption and reaction of cuprous ions[J]. Thin Solid Films, 2004, 460(1/2): 58-61.

[26]

Zhao W, Fu W, Yang H, et al. Shape-controlled synthesis of Cu2O microcrystals by electrochemical method[J]. Applied Surface Science, 2010, 256(7): 2269-2275.

[27]

Kumar R V, Diamant Y, Gedanken A. Sonochemical synthesis and characterization of nanometer-size transition metal oxides from metal acetates[J]. Chemistry of Materials, 2000, 12(8): 2301-2305.

[28]

Tan Y, Xue X, Peng Q, et al. Controllable fabrication and electrical performance of single crystalline Cu2O nanowires with high aspect ratios[J]. Nano Letters, 2007, 7(12): 3723-3728.

[29]

Huang L, Peng F, Yu H, et al. Preparation of cuprous oxides with different sizes and their behaviors of adsorption, visible-light driven photocatalysis and photocorrosion[J]. Solid State Sciences, 2009, 11(1): 129-138.

[30]

Liu H, Miao W, Yang S, et al. Controlled synthesis of different shapes of Cu2O via g -irradiation[J]. Crystal Growth & Design, 2009, 9(4): 1733-1740.

[31]

Zhu W, Wang G, Hong X, et al. One-step fabrication of Ni/TiO2 core/shell nanorod arrays in anodic aluminum oxide membranes[J]. The Journal of Physical Chemistry C, 2009, 113(14): 5450-5454.

[32]

Xiong L, Xiao H, Chen S, et al. Fast and simplified synthesis of cuprous oxide nanoparticles: annealing studies and photocatalytic activity[J]. RSC Advances, 2014, 4(107): 62115-62122.

[33]

Maira A J, Yeung K L, Lee C Y, et al. Size effects in gas-phase photo-oxidation of trichloroethylene using nanometer-sized TiO2 catalysts[J]. Journal of Catalysis, 2000, 192(1): 185-196.

[34]

Zheng Z, Huang B, Wang Z, et al. Crystal faces of Cu2O and their stabilities in photocatalytic reactions[J]. The Journal of Physical Chemistry C, 2009, 113(32): 14448-14453.

[35]

Wu L, Tsui L K, Swami N, et al. Photoelectrochemical stability of electrodeposited Cu2O films[J]. The Journal of Physical Chemistry C, 2010, 114(26): 11551-11556.

[36]

Zhou L, He J, Zhang J, et al. Facile in-situ synthesis of manganese dioxide nanosheets on cellulose fibers and their application in oxidative decomposition of formaldehyde[J]. The Journal of Physical Chemistry C, 2011, 115(34): 16873-16878.

[37]

He J, Kunitake T, Watanabe T. Porous and nonporous Ag nanostructures fabricated using cellulose fiber as a template[J]. Chemical Communications, 2005(6): 795-796.

[38]

Vainio U, Pirkkalainen K, Kisko K, et al. Copper and copper oxide nanoparticles in a cellulose support studied using anomalous small-angle X-ray scattering[J]. The European Physical Journal D, 2007, 42(1): 93-101.

[39]

Hu W, Chen S, Yang J, et al. Functionalized bacterial cellulose derivatives and nanocomposites[J]. Carbohydrate Polymers, 2014, 101: 1043-1060.

[40]

He J, Kunitake T, Nakao A. Facile in situ synthesis of noble metal nanoparticles in porous cellulose fibers[J]. Chemistry of Materials, 2003, 15(23): 4401-4406.

[41]

Sedighi A, Montazer M, Samadi N. Synthesis of nano Cu2O on cotton: Morphological, physical, biological and optical sensing characterizations[J]. Carbohydrate Polymers, 2014, 110: 489-498.

[42]

Zhang G, Sun Z, Duan Y, et al. Synthesis of nano-TiO2/diatomite composite and its photocatalytic degradation of gaseous formaldehyde[J]. Applied Surface Science, 2017, 412: 105-112.

[43]

Gopalakrishnan K, Ramesh C, Ragunathan V, et al. Antibacterial activity of Cu2O nanoparticles on E. coli synthesized from tridax procumbens leaf extract and surface coating with polyaniline[J]. Digest Journal of Nanomaterials and Biostructures, 2012, 7: 833-839.

[44]

Prabhakaran G, Murugan R. Synthesis of Cu2O nanospheres and cubes: their structural, optical and magnetic properties[J]. Advanced Materials Research, 2014, 938: 114-117.

[45]

Ghule K, Ghule A V, Chen B J, et al. Preparation and characterization of ZnO nanoparticles coated paper and its antibacterial activity study[J]. World Pulp & Paper, 2007, 8(12): 1034-1041.

[46]

Gong S, Wu X, Zhang J, et al. Facile solution synthesis of Cu2O-CuO-Cu(OH)2 hierarchical nanostructures for effective catalytic ozone decomposition[J]. Cryst Eng Comm, 2018, DOI: 10.1039/C8CE00203G.

[47]

Yoosefi Booshehri A, Wang R, Xu R. Simple method of deposition of CuO nanoparticles on a cellulose paper and its antibacterial activity[J]. Chemical Engineering Journal, 2015, 262: 999-1008.

[48]

Su X, Liao Q, Liu L, et al. Cu2O nanoparticlefunctionalized cellulose-based aerogel as highperformance visible-light photocatalyst[J]. Cellulose, 2017, 24(2): 1017-1029.

Paper and Biomaterials
Pages 1-14
Cite this article:
Sun L, Xin X, An X, et al. Nano-Cu2O-loaded Paper: Green Preparation and High Visible Light Photocatalytic Performance for Formaldehyde Removal. Paper and Biomaterials, 2019, 4(3): 1-14. https://doi.org/10.26599/PBM.2019.9260017

448

Views

45

Downloads

1

Crossref

8

Scopus

Altmetrics

Received: 08 April 2019
Accepted: 30 April 2019
Published: 01 July 2019
© 2019 Paper and Biomaterials Editorial Board

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Return