AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Journal of Advanced Manufacturing Science and Technology Article
PDF (10 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Open Access

Methods on error-modeling, detection and compensation in gear hobbing process: A short review

Weisen ZHAOa, Qiang GUOa, Changlin SHUb( ), Zhixi ZHENa, Wenbo WANGa,
School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, 454150, China
Nanjing High Speed Gear Manufacturing Co., Ltd., Nanjing, 211100, China

Peer review under responsibility of Editorial Committee of JAMST

Show Author Information

Abstract

Gear is one of important transmission components in mechanical devices. How to correctly produce gears that meets the transmission requirements has always been the research focus in the mechanical industry. Among processing methods of gears, gear hobbing is the one of the most important processing methods because of its high production efficiency and strong universality. However, due to the influence of machining process, various errors will inevitably appear in the gear hobbing process. Therefore, the analysis of hobbing error modeling, detection and compensation are very vital to improve gear accuracy. This paper summarizes researches and developments of the above three aspects, and puts forward the direction and content that need to be further studied: constructing a closed-loop hobbing machining system of "tooth surface error modeling - tooth surface error tracing - error compensation".

Keywords

Closed-loopTooth surface error modelingTooth surface error tracingError compensationGear hobbing

References

1

Ueda Y, Sakurai N, Takagi T, et al. Exploratory investigation of chip formation and surface integrity in ultra-high-speed gear hobbing. CIRP Ann 2022;71(1):89-92.
Crossref Google Scholar
2

Yagishita H. Method for measuring the dynamic transmission error in large gear hobbing machines. Precis Eng 1990;12(3):144-150.
Crossref Google Scholar
3

Khusainov RM, Khaziev RR. Mathematical model for assessing the accuracy of processed gears on gear shaping machines. Procedia Eng 2017;206: 1087-1092.
Crossref Google Scholar
4

Xia CJ, Wang SL, Wang SB, et al. Geometric error identification and compensation for rotary worktable of gear profile grinding machines based on single-axis motion measurement and actual inverse kinematic model. Mech Mach Theory 2021;155: 104042.
Crossref Google Scholar
5

Mallipeddi D, Norell M, Sosa M, et al. The effect of manufacturing method and running-in load on the surface integrity of efficiency tested ground, honed and superfinished gears. Tribol Int 2019; 131: 277-287.
Crossref Google Scholar
6

Cheng YN, Ma CJ, Zhang JY, et al. Research progress on technology parameter optimization of high-speed dry gearhobbing. Journal of Harbin University of Science and Technology 2022; 2: 10-20 [Chinese].
Google Scholar
7

Troß N, Löpenhaus C, Klocke F. Analysis of the cutting conditions for radial-axial infeed strategies in gear hobbing. Procedia CIRP 2019;79: 68-73.
Crossref Google Scholar
8

Liu X, Mei XS, Tao T, et al. A null-coupling error model in gear hobbing and error prediction. Journal of Xi’an Jiao Tong University 2016; 50 (10): 42-48, 85 [Chinese].
Google Scholar
9

Wang XL. Error Analysis on gear production. Machinery Management and Development 2014;29 (6): 35-37 [Chinese].
Google Scholar
10

Zhang WL, Yan JC. Research on dynamic compensation system of hobbing machining error. Digital Technology and Application 2011 [Chinese].
Google Scholar
11
Zhang L. Research on structural analysis and error compensation technology of YK3150E CNC hobbing machine[dissertation]. Lanzhou: Lanzhou University of Technology; 2019.
12
Jiang XF. The research on thermal error compensation of CNC hobbing machine tools [dissertation]. Hefei: Hefei University of Technology; 2013.
13
Liu ZT. Research on thermal error modeling and compensation of high-speed dry-cutting CNC gear hobbing machine[dissertation]. Chongqing: Chongqing University; 2018.
14

Shen JH, Guo YJ. Application of partial least squares neural network in thermal error modeling for CNC machine tool. Key Eng Mater 2009; 392-394:30-34.
Crossref Google Scholar
15

Lei CL, Rui ZY, Liu J, et al. Thermal error robust modeling for high-speed motorized spindle. Adv Mater Res 2012;1669(466-467):961-965.
Crossref Google Scholar
16

Vyroubal J. Compensation of machine tool thermal deformation in spindle axis direction based on decomposition method. Precis Eng 2012;36(1):121-127.
Crossref Google Scholar
17

Liu H, Miao EM, Zhuang XD, et al. Thermal error robust modeling method for CNC machine tools based on a split unbiased estimation algorithm. Precis Eng 2018;51: 169-175.
Crossref Google Scholar
18

Mize CD, Ziegert JC. Neural network thermal error compensation of a machining center. Precis Eng 2000;24(4):338-346.
Crossref Google Scholar
19
Yan W. Research on real-time detection and compensation method for thermal error of dry-cut hobbing machine[dissertation]. Chongqing: Chongqing University of Technology; 2020.
20
Li YX. New methods of thermal reeor modeling for NC machine tools and the2ir researchment and application[dissertation]. Shanghai: Shanghai Jiao Tong University; 2007.
21
Guo QJ. Research on real-time compensation technology of geometric and thermal errors for gear hobbing machine[dissertation]. Shanghai: Shanghai Jiao Tong University; 2008.
22

Leete DL. Automatic compensation of alignment errors in machine tools. Int J Mach Tool Des Res 1961;1(4):293-324.
Crossref Google Scholar
23
French D, Humphries SH. Compensation for the backlash and alignment errors in a numerically controlled machine tool by a digital computer programme. Advances in Machine Tool Design and Research 1967. Amsterdam: Elsevier, 1968: 707-726.
Crossref
24
Reshetov DN, Portman VT, Dunaevsky VV. Accuracy of machine tools. New York: ASME Press, 1988.
25

Pennock GR, Oncu BA. Application of screw theory to rigid body dynamics. J Dyne Sys Meas Control, 1992;114(2):262-269.
Crossref Google Scholar
26

Denavit J, Hartenberg RS. A kinematic notation for lower-pair mechanisms based on metrics. Transactions of the ASME. Journal of Applied Mechanics 1955; 22: 215-221.
Crossref Google Scholar
27

Liu YW, Liu LB, Zhao XS, et al. Research on error compensation technology of NC machine tool. China Mechanical Engineering 1998; 9(12): 48-52 [Chinese].
Google Scholar
28
Xia HS. Geometric error modeling and compensation research for CNC gear hobbing machine[dissertation]. Hefei: Hefei University of Technology; 2013.
29
Liu RA. Research and application of key technologies of direct-drive gear hobbing machine[dissertation]. Chongqing: Chongqing University; 2006.
30
Huang Q. Study on the technologies of controlling precision and sup-perssing chatter vibration for“zero-transmission”hobber [dissertation]. Chongqing: Chongqing University; 2008.
31

Huang Q, Zhang GB, Zhang XY. Building and application of direct er-ror model for gear hobbing. Journal of System Simulation 2009; 21 (17): 5589-5593 [Chinese].
Google Scholar
32

Jin J, Chen P, Li PW. Application of laser interferometer in rapid indication error measurement of large scale three coordinate measuring machine. Shanghai Metrology and Testing 2017; 44 (1): 20-23 [Chinese].
Google Scholar
33
Sun SL. Research on multi-source error modeling and compensation method for CNC hobbing process[dissertation]. Chongqing: Chongqing University; 2018.
34

Liu YW. Research on total error model and error compensation of CNC machine tools. Manufacturing Technology & Machine Tool 2003;(7):46-50, 74 [Chinese].
Google Scholar
35

Li YM, Yang XZ, Shen XQ, et al. Study on measurement and identification of geometric error for the NC machine tools based on the twelve-line method. Journal of Henan Polytechnic University (Natural Science) 2009;28(5): 592-595 [Chinese].
Google Scholar
36

Chen GQ, Yuan JX, Ni J. A displacement measurement approach for machine geometric error assessment. Int J Mach Tools Manuf 2001;41(1):149-161.
Crossref Google Scholar
37

Zhang G, Ouyang R, Lu B, et al. A displacement method for machine geometry calibration. CIRP Ann 1988;37(1):515-518.
Crossref Google Scholar
38

He ZY, Fu JZ, Zhang LC, et al. A new error measurement method to identify all six error parameters of a rotational axis of a machine tool. Int J Mach Tools Manuf 2015;88: 1-8.
Crossref Google Scholar
39

Lv B, Li DX. Error identification and compensation of NC machine tool based on ball instrument. Defense Manufacturing Technology 2017;1: 61-63 [Chinese].
Google Scholar
40

Zargarbashi SHH, Mayer JRR. Assessment of machine tool trunnion axis motion error, using magnetic double ball bar. Int J Mach Tools Manuf 2006;46(14):1823-34.
Crossref Google Scholar
41

Lei WT, Sung MP, Liu WL, et al. Double ballbar test for the rotary axes of five-axis CNC machine tools. Int J Mach Tools Manuf 2007;47(2):273-285.
Crossref Google Scholar
42

Flynn J, Vichare P, Chaharsooghi A, et al. Single setup ballbar testing of 5-axis machine tools to identify position-independent geometric errors. FAIM 2015: The International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 2015.
Google Scholar
43

Xiang ST, Altintas Y. Modeling and compensation of volumetric errors for five-axis machine tools. Int J Mach Tools Manuf 2016;101: 65-78.
Crossref Google Scholar
44

Liang YY, Liang RJ, Wang QL, et al. Research on geometrical error identification of machine tool rotary table base on DBB position. Machinery & Electronics 2017; 2: 45-50 [Chinese].
Google Scholar
45

Chen ZW, Ding S, Song ZY, et al. Review of research on tooth surface error control of large CNC gear forming grinding. Journal of Mechanical Transmission 2022.
Google Scholar
46

Ren YQ，Yang JG. Research on decoupling of comprehensive error compensation for five-axis CNC machine tools. Chinese Journal of Mechanical Engineering, 2004，40 (2) :55-59.
Crossref Google Scholar
47

Hsu YY, Wang SS. A new compensation method for geometry errors of five-axis machine tools. Int J Mach Tools Manuf 2007;47(2):352-360.
Crossref Google Scholar
48

Chen JX, Lin SW, He BW. Geometric error compensation for multi-axis CNC machines based on differential transformation. Int J Adv Manuf Technol 2014;71(1-4):635-642.
Crossref Google Scholar
49
Liao L. Study on decoupling and compensation of volumetric error of CNC gear grinding machine tool[dissertation]. Chongqing: Chongq-ing University; 2017.
50

Ding S, Huang XD, Yu CJ, et al. Actual inverse kinematics for position-independent and position-dependent geometric error compensation of five-axis machine tools. Int J Mach Tools Manuf 2016;111: 55-62.
Crossref Google Scholar
51
Yang JG. Comprehensive error compensation technology and application of NC machine tool[dissertation]. Shanghai: Shanghai Jiao Tong University; 1998.
52
Yee KW, Gavin RJ. Implementing fast part probing and error compen-sation on machine tools. Technical Report NISITIR-4447, 1990.
Crossref
53

Kim KD, Kim MS, Chung SC. Real-time compensatory control of thermal errors for high-speed machine tools. Proc Inst Mech Eng B J Eng Manuf 2004;218(8):913-924.
Crossref Google Scholar
54

Yang S, Yuan J, Ni J. Accuracy enhancement of a horizontal machining center by real-time error compensation. J Manuf Syst 1996;15(2): 113-124.
Crossref Google Scholar
55

Jiang H, Sun HY, Fan JZ, et al. Research on error compensation of NC machine tool based on the offset function of external coordinate origin of FANUC 0I system. Machinery 2009;47 (7): 73-76.
Google Scholar
56

Yang JG, Zhang HT, Tong HC, et al. The application of real-time thermal error compensation on NC machine tools. J Shanghai Jiao Tong University 2005; 39 (9): 1389-1392 [Chinese].
Google Scholar
57

Wang SL, Qi P, Zhou J, et al. Thermal deformation error analysis and compensation method for NC gear hobbing machine tools. Journal of Shanghai Jiao Tong University 2011; 34 (3): 13-17 [Chinese].
Google Scholar
58

Jing YG, Wang W. Diagnosis and compensation of hobbing error. Journal of Shenyang Polytechnic University 1986; 8 (2): 21-35 [Chinese].
Google Scholar
59
Chiu H, Umezaki Y, Arura Y. An improvement of the tooth profile accuracy of a hobbed gear by adjusting the hob eccentricity. JSME International Journal. Ser. 3, Vibration, Control Engineering, Engineering for Industry 1989, 32(1): 131-135.
Crossref
60

Zheng Y, Zheng FY, Gao ZH, et al. Refinement practical technology testing system of machine transmission chain and gear hobbing machine. Manufacturing Technology & Machine Tools 2010; 9: 102-106 [Chinese].
Google Scholar
61

Zhang CR. Real time compensation and controlling transmission of gear hobbing machines. Manufacturing Technology & Machine tool 1993 (9): 16-18 [Chinese].
Google Scholar
62

Shang XD, Jing YG, Deng LJ. On the application of hobbing radial error compensation technology in hobbing machining. Journal of Shenyang University of Technology 1996;18(1): 1-7, 12 [Chinese].
Google Scholar
63

Shang XD, Jing YG. Hobbing error diagnosis. Mechanical Design & Manufacturing 1995; (6): 40-42 [Chinese].
Google Scholar
64

Du JM, Wu XT, Wu H, et al. Modeling, simulation and application for compensation of movement error in NC gear hobbing. Journal of System Simulation 2002; 14 (12): 1680-1682 [Chinese].
Google Scholar
65

Gao XL, Lu KJ, Zhao YX. The diagnosis analysis of gear-hobbing machining error and the study of the compensation system. New Technology & New Process 2002;12: 19-21 [Chinese].
Google Scholar
66
Wang FL. Research on generating method and error compensation for digital gear tooth surfaces[dissertation]. Wuhan: Huazhong University of Science and Technology; 2005.
67
Ma SZ. CNC gear hobbing machining error compensation research[dissertation]. Shenyang: Shenyang Ligong University; 2013.
68

Yu Y, Wang RQ, Wang YP, et al. Contact force controlled robotic polishing for complex PMMA parts with an active end-effector. J Adv Manuf Sci Technol 2021;1(4): 2021012.
Crossref Google Scholar
69

Geng TY, Xu ZY. Electrochemical discharge machining for fabricating holes in conductive materials: a review. J Adv Manuf Sci Technol 2021;1(3):2021006.
Crossref Google Scholar
70

Niu JB, Xu JT, Ren F, et al. A short review on milling dynamics in low-stiffness cutting conditions: modeling and analysis. J Adv Manuf Sci Technol 2021;1(1):2020004.
Crossref Google Scholar
Journal of Advanced Manufacturing Science and Technology
Volume 3 Issue 1,
January 2023
DOI: 10.51393/j.jamst.2022019
Cite this article:
ZHAO W, GUO Q, SHU C, et al. Methods on error-modeling, detection and compensation in gear hobbing process: A short review. Journal of Advanced Manufacturing Science and Technology, 2023, 3(1): 2022019. https://doi.org/10.51393/j.jamst.2022019

123

Views

1

Downloads

2

Crossref

2

Scopus

Altmetrics
Received: 01 July 2022
Revised: 12 August 2022
Accepted: 15 September 2022
Published: 15 January 2023
©JAMST

This is an Open Access article distributed under the terms of the Creative Commons Attribution License http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Return