Synthetic vascular grafts suitable for small-diameter arteries (<6 mm) are in great need. However, there are still no commercially available small-diameter vascular grafts (SDVGs) in clinical practice due to thrombosis and stenosis after in vivo implantation. When designing SDVGs, many studies emphasized reendothelization but ignored the importance of reconstruction of the smooth muscle layer (SML). To facilitate rapid SML regeneration, a high-resolution 3D printing method was used to create a novel bilayer SDVG with structures and mechanical properties mimicking natural arteries. Bioinspired by the collagen alignment of SML, the inner layer of the grafts had larger pore sizes and high porosity to accelerate the infiltration of cells and their circumferential alignment, which could facilitate SML reconstruction for compliance restoration and spontaneous endothelialization. The outer layer was designed to induce fibroblast recruitment by low porosity and minor pore size and provide SDVG with sufficient mechanical strength. One month after implantation, the arteries regenerated by 3D-printed grafts exhibited better pulsatility than electrospun grafts, with a compliance (8.9%) approaching that of natural arteries (11.36%) and significantly higher than that of electrospun ones (1.9%). The 3D-printed vascular demonstrated a three-layer structure more closely resembling natural arteries while electrospun grafts showed incomplete endothelium and immature SML. Our study shows the importance of SML reconstruction during vascular graft regeneration and provides an effective strategy to reconstruct blood vessels through 3D-printed structures rapidly.
- Article type
- Year
- Co-author
Open Access
Paper
Issue
Open Access
Research Article
Issue
His bundle pacing (HBP) and left bundle branch pacing (LBBP) both provide physiologic pacing which maintain left ventricular synchrony. They both improve heart failure (HF) symptoms in atrial fibrillation (AF) patients. We aimed to assess the intra-patient comparison of ventricular function and remodeling as well as leads parameters corresponding to two pacing modalities in AF patients referred for pacing in intermediate term.
Uncontrolled tachycardia AF patients with both leads implantation successfully were randomized to either modality. Echocardiographic measurements, New York Heart Association (NYHA) classification, quality-of-life assessments and leads parameters were obtained at baseline and at each 6-month follow up. Left ventricular function including the left ventricular endo-systolic volume (LVESV), left ventricular ejection fraction (LVEF) and right ventricular (RV) function quantified by tricuspid annular plane systolic excursion (TAPSE) were all assessed.
Consecutively twenty-eight patients implanted with both HBP and LBBP leads successfully were enrolled (69.1 ± 8.1 years, 53.6% male, LVEF 59.2% ± 13.7%). The LVESV was improved by both pacing modalities in all patients (n = 23) and the LVEF was improved in patients with baseline LVEF at less than 50% (n = 6). The TAPSE was improved by HBP but not LBBP (n = 23).
In this crossover comparison between HBP and LBBP, LBBP was found to have an equivalent effect on LV function and remodeling but better and more stable parameters in AF patients with uncontrolled ventricular rates referred for atrioventricular node (AVN) ablation. HBP could be preferred in patients with reduced TAPSE at baseline rather than LBBP.
京公网安备11010802044758号